|
04-16-2010, 07:28 AM
|
#1 |
|
Just Another Crazy Canuck
Join Date: Dec 2000
Location: Richmond,British Columbia Canada
Posts: 1,228
|
clutch pedal spring
what is the purpose of the spring on the clutch pedal?(inside the cab)
to keep pressure on the linkage, keeping the adjustment rod incontact with the fork? Anything more than 1/4 way down on the pedal and it will suck it to the floor(it was to fun to find that while driving) The spring for the fork is worn out and lifting the pedal with my toe is really annoying hahaha 
__________________
1985  454/465/205, 38.5x11-16BOGGERS   soon to be installed: 14bDETROIT,Edelbrock Performer cam,intake and valve springs,Comp roller tips,MSD HEI |
|
|
|
04-17-2010, 09:30 AM
|
#2 |
|
Just Another Crazy Canuck
Join Date: Dec 2000
Location: Richmond,British Columbia Canada
Posts: 1,228
|
Re: clutch pedal spring
anybody??
__________________
1985 454/465/205, 38.5x11-16BOGGERS soon to be installed: 14bDETROIT,Edelbrock Performer cam,intake and valve springs,Comp roller tips,MSD HEI |
|
|
|
|
04-17-2010, 10:13 AM
|
#3 | |
|
just can't cover up my redneck
Join Date: May 2004
Location: Columbus OH
Posts: 11,414
|
Re: clutch pedal spring
I'm pretty sure that it is an "over-centering" device with a dual purpose. It holds the pedal "up" against the stop, keeping it from rattling....and once you push it down "over-center" of the pivot point it actually helps push the pedal down.
__________________
You can review the site's rules here. Quote:
Bad planning on your part does not necessarily constitute an instant emergency on my part.... The great thing about being a pessimist is that you are either pleasantly surprised or right. 
|
|
|
|
|
|
04-17-2010, 07:36 PM
|
#4 |
|
Just Another Crazy Canuck
Join Date: Dec 2000
Location: Richmond,British Columbia Canada
Posts: 1,228
|
Re: clutch pedal spring
that makes sense because anything less than a 1/4 and the pedal will return to the top
Thanks
__________________
1985 454/465/205, 38.5x11-16BOGGERS soon to be installed: 14bDETROIT,Edelbrock Performer cam,intake and valve springs,Comp roller tips,MSD HEI |
|
|
|
|
06-05-2010, 09:42 PM
|
#5 |
|
Registered User
Join Date: Jul 2009
Location: La Crosse, WI
Posts: 218
|
Re: clutch pedal spring
What does your spring look like? My 72 has a large vertical spring, which over-centers and the pedal sticks to the floor. I learned really quick to keep one foot on the pedal while hooking the other underneath it to get it unstuck. My 67 has a smaller horizontal spring, which does not over-center.
__________________
Currently truckless, previous trucks: 67 K20, 87 K10 aka V10 & 72 C10 |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
