The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-20-2010, 09:51 AM   #1
Muleman100
Registered User
 
Muleman100's Avatar
 
Join Date: Nov 2008
Location: Crosby, Texas
Posts: 377
Speedo off 20 mph

I changed the dash in my 72 Burb and the speedo is 20 mph. When I am registering 40mph on my speedo I am actually only going 20mph. Can this be corrected or do i need to switch out the dinstrument panel again? I thought a plastic gear can be changed in the tranny, but I know nothing about that.

__________________
" I never think of the future. It comes soon enough " - Albert Einstein
Muleman100 is offline   Reply With Quote
Old 04-20-2010, 09:56 AM   #2
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,858
Re: Speedo off 20 mph

Google is a beatitful thing.....

http://www.transmissioncenter.net/sp...n_______va.htm

***

Last edited by Hart_Rod; 04-20-2010 at 09:56 AM.
Hart_Rod is offline   Reply With Quote
Old 04-20-2010, 01:08 PM   #3
Richard H.
Spanked once
 
Richard H.'s Avatar
 
Join Date: Oct 2006
Location: Intheshop, Indiana
Posts: 969
Re: Speedo off 20 mph

That is weird..what was the change in the dash? I'm not aware of differences in the gauge ratio unless the old or the new has some sort of corrector on it. Be a different story if you did a change with the trans.
__________________
The ole 350 budget build.
Richard H. is offline   Reply With Quote
Old 04-20-2010, 04:39 PM   #4
piecesparts
Parts and more parts
 
piecesparts's Avatar
 
Join Date: Nov 2003
Location: Lebo, Kansas (middle of nowhere
Posts: 6,821
Re: Speedo off 20 mph

I agree on that the instrument panel change should not have made a difference, UNLESS the speedo is FUBAR. I would try to calculate if the difference is the same at all speeds or if it gets worse or better as the speed is changed on the road. That should tell you is the speedo is not working right, vice the gear ratios. However the gear change is not hard if you go to your tranny shop or the NET and do a little "Driven" and "Drive" gear research. There are different teeth numbers and the colors of the gears usually denote the number of teeth.
__________________
Frank
piecesparts is offline   Reply With Quote
Old 04-20-2010, 08:35 PM   #5
chris91
Registered User
 
Join Date: Mar 2008
Location: summerville, sc
Posts: 93
Re: Speedo off 20 mph

I think I have the same problem. I seems to be off the same amount. I think mine is because I changed from a 3 speed manual to a TH350. Not sure.
chris91 is offline   Reply With Quote
Old 04-20-2010, 08:53 PM   #6
dan42
Registered User
 
dan42's Avatar
 
Join Date: Feb 2007
Location: Cali Central Coast
Posts: 5,191
Re: Speedo off 20 mph

There is a little calibrater you can put on at the tranny - check at your speedo shop,
__________________
'67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD
Click here to support the board
Philippians 4: 6-7
dan42 is offline   Reply With Quote
Old 04-21-2010, 08:09 AM   #7
dwaite72lnghrn
Registered User
 
Join Date: Jun 2002
Location: central pa
Posts: 1,525
Re: Speedo off 20 mph

Check and make sure your speedo cable is fully inserted in the speedo meter and tighten down. I have seen loose cable cause a similar problem.
__________________
72 longhorn c30 502BB/th400/fact air/4.11rear/ custom camper
72 bug(the better half's) under reconstruction
2009 HHR aqua blue
71 GMC k20 350/sm465
2009 Chevy hd3500 6.6 Victory Red crew cab dually
Dave & Jeanne
dwaite72lnghrn is offline   Reply With Quote
Old 04-21-2010, 08:54 AM   #8
Muleman100
Registered User
 
Muleman100's Avatar
 
Join Date: Nov 2008
Location: Crosby, Texas
Posts: 377
Re: Speedo off 20 mph

Thanks for the suggestions. When I bought the Burb the speedo did not work at all. I had a couple of spare instrument panels laying around so I picked one and installed it. Me thinking that all panels were equal, I didn't label them as I removed them. The burb is a half ton and has a 402 big block with the TH400 Tranny which I haven't changed. Still not clear if the Instrument panels have different ratios for different applications. However I did change the tire size but not the rim size.

__________________
" I never think of the future. It comes soon enough " - Albert Einstein
Muleman100 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:15 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com