The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-22-2010, 10:01 AM   #1
stealthy '69
'69 Chevy SWB
 
stealthy '69's Avatar
 
Join Date: Feb 2009
Location: Surprise, Az
Posts: 1,065
disk parts exchange ?'s

I'm putting discs on the front of my 69, right now I have all 71-72 parts. (b/j, t/r, and spindles) I've noticed 73-? calipers and some other thins are a lot cheaper then 71-72.

My question is, will the 73-? calipers fit on my spindles?
__________________
Matt



'69 Chevy SWB Fleet, Primer Black; Project No Name
'06 Chevy Trailblazer, Blueish Silver?; Wifes DD, Sold
'08 Chevy Impala SS, Silver; the new DD, AND IT IS FUN!!!
'99 Dodge Dakota R/T, Intense Blue; DD, Sold


Quote:
Originally Posted by longbed67 View Post
The tig welds are not the prettiest i have seen but they do have good penetration.
Quote:
Originally Posted by oldblue1968chevy View Post
There are two things in life where penetration is really important.....and one of them is welding.
stealthy '69 is offline   Reply With Quote
Old 04-22-2010, 10:05 AM   #2
Twisted78SS
Wide n'Low
 
Twisted78SS's Avatar
 
Join Date: Jan 2007
Location: La Center, WA
Posts: 1,511
Re: disk parts exchange ?'s

Yeah, they are the same for a number of years, I just forget how far.. my 77 work fine on my 72
__________________
Trippin Hazard.. 67 swb,
Gold Member.. 68 Suburban
Air Force Retired
Twisted78SS is offline   Reply With Quote
Old 04-22-2010, 11:49 AM   #3
POPO1984
Registered User
 
POPO1984's Avatar
 
Join Date: Jul 2009
Location: Houston, Tx
Posts: 1,133
Re: disk parts exchange ?'s

so 73-87 calipers will fit a 72 spindle
__________________
1972 SWB Medium Olive
South Houston
Instagram: Antbish84
POPO1984 is offline   Reply With Quote
Old 04-22-2010, 02:07 PM   #4
Twisted78SS
Wide n'Low
 
Twisted78SS's Avatar
 
Join Date: Jan 2007
Location: La Center, WA
Posts: 1,511
Re: disk parts exchange ?'s

The typical caliper part number comes back with the following vehicle interchange info.. This is for a RAYBESTOS Part # FRC4213 front right caliper, and the part # for the left is RAYBESTOS Part # FRC4214



BUICK CENTURION (1971 - 1973)
BUICK ELECTRA 1973
BUICK ELECTRA 225 (1971 - 1976)
BUICK ELECTRA 225 CUSTOM (1971 - 1975)
BUICK ELECTRA 225 LIMITED (1974 - 1975)
BUICK ELECTRA LIMITED 1976
BUICK ESTATE WAGON (1971 - 1976)
BUICK LESABRE (1971 - 1976)
BUICK LESABRE CUSTOM (1971 - 1976)
BUICK LESABRE LUXUS 1974
BUICK RIVIERA (1971 - 1976)
CADILLAC COMMERCIAL CHASSIS (1977 - 1978)
CADILLAC FLEETWOOD (1977 - 1978)
CADILLAC FLEETWOOD FORMAL (1977 - 1978)
CHECKER MARATHON (1975 - 1979)
CHECKER MARATHON DELUXE (1971 - 1974)
CHEVROLET BEL AIR (1971 - 1975)
CHEVROLET BISCAYNE (1971 - 1972)
CHEVROLET BLAZER (1971 - 1978)
CHEVROLET BROOKWOOD (1971 - 1972)
CHEVROLET C10 PICKUP (1972 - 1978)
CHEVROLET C10 PICKUP BIG TEN 1978
CHEVROLET C20 PICKUP (1973 - 1986)
CHEVROLET C20 SUBURBAN (1973 - 1978)
CHEVROLET C30 PICKUP (1972 - 1978)
CHEVROLET CAPRICE (1971 - 1972)
CHEVROLET CAPRICE CLASSIC (1973 - 1976)
CHEVROLET CAPRICE ESTATE (1973 - 1976)
CHEVROLET G10 SPORTVAN (1975 - 1978)
CHEVROLET G10 VAN (1975 - 1978)
CHEVROLET G20 SPORTVAN (1971 - 1978)
CHEVROLET G20 VAN (1971 - 1978)
CHEVROLET G30 SPORTVAN (1972 - 1978)
CHEVROLET G30 VAN (1972 - 1978)
CHEVROLET IMPALA (1971 - 1976)
CHEVROLET IMPALA CUSTOM 1976
CHEVROLET K5 BLAZER 1976
CHEVROLET KINGSWOOD (1971 - 1972)
CHEVROLET KINGSWOOD ESTATE (1971 - 1972)
CHEVROLET P10 VAN (1972 - 1978)
CHEVROLET P20 VAN (1972 - 1978)
CHEVROLET P30 VAN (1971 - 1978)
CHEVROLET TOWNSMAN (1971 - 1972)
GMC C15 PICKUP (1975 - 1978)
GMC C15 PICKUP BIG TEN (1977 - 1978)
GMC C15/C1500 PICKUP (1972 - 1974)
GMC C25 PICKUP (1975 - 1978)
GMC C25 SUBURBAN (1975 - 1978)
GMC C25/C2500 PICKUP (1973 - 1974)
GMC C25/C2500 SUBURBAN (1973 - 1974)
GMC C2500 PICKUP (1979 - 1986)
GMC C35 PICKUP (1975 - 1978)
GMC C35/C3500 PICKUP (1972 - 1974)
GMC G15 VAN RALLY (1975 - 1978)
GMC G15 VANDURA (1975 - 1978)
GMC G25 VAN RALLY (1975 - 1978)
GMC G25 VANDURA (1975 - 1978)
GMC G25/G2500 VAN RALLY (1972 - 1974)
GMC G25/G2500 VANDURA (1972 - 1974)
GMC G35 VAN (1975 - 1978)
GMC G35 VAN RALLY (1975 - 1978)
GMC G35 VANDURA (1975 - 1978)
GMC G35/G3500 VAN 1974
GMC G35/G3500 VAN RALLY (1972 - 1974)
GMC G35/G3500 VANDURA (1972 - 1974)
GMC JIMMY (1971 - 1978)
GMC P15 VAN (1975 - 1978)
GMC P15/P1500 VAN (1972 - 1974)
GMC P25 VAN (1975 - 1978)
GMC P25/P2500 VAN (1972 - 1974)
GMC P35 VAN (1975 - 1978)
GMC P35/P3500 VAN (1971 - 1974)
OLDSMOBILE 98 (1971 - 1976)
OLDSMOBILE 98 REGENCY (1973 - 1976)
OLDSMOBILE CUSTOM CRUISER (1971 - 1976)
OLDSMOBILE DELTA 88 (1971 - 1976)
OLDSMOBILE DELTA 88 CUSTOM 1971
OLDSMOBILE DELTA 88 ROYALE (1971 - 1976)
PONTIAC BONNEVILLE (1971 - 1976)
PONTIAC BONNEVILLE BROUGHAM 1976
PONTIAC CATALINA (1971 - 1976)
PONTIAC CATALINA BROUGHAM (1971 - 1972)
PONTIAC CATALINA SAFARI (1971 - 1976)
PONTIAC GRAND SAFARI (1971 - 1976)
PONTIAC GRANDVILLE (1971 - 1974)
PONTIAC PARISIENNE 1976
__________________
Trippin Hazard.. 67 swb,
Gold Member.. 68 Suburban
Air Force Retired
Twisted78SS is offline   Reply With Quote
Old 04-22-2010, 03:54 PM   #5
Tx Firefighter
Watch out for your cornhole !
 
Tx Firefighter's Avatar
 
Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
Re: disk parts exchange ?'s

The 71-72 calipers interchange with the later calipers. The difference is in where the brake hoses bolt to the caliper. Each caliper is forged a little different. I've had to grind the steel hose ends a bit to make them work. Nothing that you can't do in just a couple of minutes.

Here is a picture I snapped awhile back to show the differences...

__________________
I'm on the Instagram- @Gearhead_Kevin

Last edited by Tx Firefighter; 04-22-2010 at 03:55 PM.
Tx Firefighter is offline   Reply With Quote
Old 04-22-2010, 04:19 PM   #6
POPO1984
Registered User
 
POPO1984's Avatar
 
Join Date: Jul 2009
Location: Houston, Tx
Posts: 1,133
Re: disk parts exchange ?'s

Thanks Tx Firefighter, so is there any advantage of using the newer calliper as opposed to the later besides the price. would i even be able to use my 72 calipers as cores for the 73-87
__________________
1972 SWB Medium Olive
South Houston
Instagram: Antbish84
POPO1984 is offline   Reply With Quote
Old 04-22-2010, 06:49 PM   #7
mclairmo
Registered User
 
Join Date: Jan 2006
Location: Take Off
Posts: 1,908
Re: disk parts exchange ?'s

I don't think the parts place will even realize that you are giving them 71-72 cores. I've returned different parts as cores before and never a problem. Most of these parts counter kids don't care. Most don't even open the box anymore.
mclairmo is offline   Reply With Quote
Old 04-23-2010, 12:03 AM   #8
stealthy '69
'69 Chevy SWB
 
stealthy '69's Avatar
 
Join Date: Feb 2009
Location: Surprise, Az
Posts: 1,065
Re: disk parts exchange ?'s

thanks guys for all the responses. at least I know now that i can save a little there. now i just need to scrounge up some scatch to get my POS finished.
__________________
Matt



'69 Chevy SWB Fleet, Primer Black; Project No Name
'06 Chevy Trailblazer, Blueish Silver?; Wifes DD, Sold
'08 Chevy Impala SS, Silver; the new DD, AND IT IS FUN!!!
'99 Dodge Dakota R/T, Intense Blue; DD, Sold


Quote:
Originally Posted by longbed67 View Post
The tig welds are not the prettiest i have seen but they do have good penetration.
Quote:
Originally Posted by oldblue1968chevy View Post
There are two things in life where penetration is really important.....and one of them is welding.
stealthy '69 is offline   Reply With Quote
Old 04-23-2010, 06:08 AM   #9
Tx Firefighter
Watch out for your cornhole !
 
Tx Firefighter's Avatar
 
Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
Re: disk parts exchange ?'s

I second that. My parts store, they open the box to make sure there is actually a caliper core in there and not a brick or something. They could care less if it's a 72 or a 73 caliper in there.
__________________
I'm on the Instagram- @Gearhead_Kevin
Tx Firefighter is offline   Reply With Quote
Old 08-01-2010, 08:31 PM   #10
Super73
Registered User
 
Super73's Avatar
 
Join Date: Nov 2007
Location: Bay Area, Ca
Posts: 2,841
Re: disk parts exchange ?'s

Don't mean to bring up an old thread, but since there are quite a few cars/trucks that run the same front caliper, does that mean they also share the same rotor? Such as the impala stuff..
__________________
------Motor---------------Bottle
60'---1.53---------------1.41
1/8---6.58 @ 105.92----5.87 @ 118.41
1/4---10.38 @ 126.97----9.24 @ 142.49
Super73 is offline   Reply With Quote
Old 06-14-2011, 08:42 PM   #11
7T2
Active Member
 
7T2's Avatar
 
Join Date: Dec 2004
Location: Marysville, OH
Posts: 667
Re: disk parts exchange ?'s

Quote:
Originally Posted by Tx Firefighter View Post
The 71-72 calipers interchange with the later calipers. The difference is in where the brake hoses bolt to the caliper. Each caliper is forged a little different. I've had to grind the steel hose ends a bit to make them work. Nothing that you can't do in just a couple of minutes.

Here is a picture I snapped awhile back to show the differences...

Don't know if anyone is following this old thread, but I just found out about this caliper difference to hard way.

Tx Firefighter, you say you modified the hose end? Is there a reason why you did that as opposed to grinding off the raised portion of the caliper so the bigger hose end could fit? Just wondering. If the parts places can't get the correct caliper for some reason I may go that route. Actually it would be cheaper (almost half the cost) to use the later model casting...
__________________
1957 GMC Ambulance
1962 Belair Wagon
1963 C80 Truck Cab *FOR SALE*
1969 Chevy C10 Short Bed
1972 Chevy C10 Long Bed *SOLD*
1996 C3500 Dually *SOLD*
7T2 is offline   Reply With Quote
Old 06-14-2011, 08:52 PM   #12
Tx Firefighter
Watch out for your cornhole !
 
Tx Firefighter's Avatar
 
Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
Re: disk parts exchange ?'s

Quote:
Originally Posted by 7T2 View Post
Don't know if anyone is following this old thread, but I just found out about this caliper difference to hard way.

Tx Firefighter, you say you modified the hose end? Is there a reason why you did that as opposed to grinding off the raised portion of the caliper so the bigger hose end could fit? Just wondering. If the parts places can't get the correct caliper for some reason I may go that route. Actually it would be cheaper (almost half the cost) to use the later model casting...
I powdercoated all of my under truck parts and didn't want to grind on the finished calipers. I just swiped the hose ends across the bench grinder to reduce the end a little in size. That's my only reasoning. You could easily do one or the other whichever you choose.
__________________
I'm on the Instagram- @Gearhead_Kevin
Tx Firefighter is offline   Reply With Quote
Old 06-14-2011, 09:08 PM   #13
7T2
Active Member
 
7T2's Avatar
 
Join Date: Dec 2004
Location: Marysville, OH
Posts: 667
Re: disk parts exchange ?'s

Heck, if none of that will hurt anything then I'll just keep the caliper I already have and save a few bucks. The 71 is 19.99 and the 72-up is 11.99 (Autozone lists the same part number for 72-up, and only 71 is different).
__________________
1957 GMC Ambulance
1962 Belair Wagon
1963 C80 Truck Cab *FOR SALE*
1969 Chevy C10 Short Bed
1972 Chevy C10 Long Bed *SOLD*
1996 C3500 Dually *SOLD*
7T2 is offline   Reply With Quote
Old 03-01-2012, 08:33 PM   #14
LostMy65
But Found Her 25yrs Later!
 
LostMy65's Avatar
 
Join Date: Oct 2010
Location: Oregon City, Oregon
Posts: 10,530
Re: disk parts exchange ?'s

I asked this question in another thread, but this thread seems to be more on topic. I was wondering if I can use the calipers off a 79 4x4 suburban on a 2wd 79 C10.

Quote:
Originally Posted by Twisted78SS View Post
The typical caliper part number comes back with the following vehicle interchange info.. This is for a RAYBESTOS Part # FRC4213 front right caliper, and the part # for the left is RAYBESTOS Part # FRC4214



BUICK CENTURION (1971 - 1973)
BUICK ELECTRA 1973
BUICK ELECTRA 225 (1971 - 1976)
BUICK ELECTRA 225 CUSTOM (1971 - 1975)
BUICK ELECTRA 225 LIMITED (1974 - 1975)
BUICK ELECTRA LIMITED 1976
BUICK ESTATE WAGON (1971 - 1976)
BUICK LESABRE (1971 - 1976)
BUICK LESABRE CUSTOM (1971 - 1976)
BUICK LESABRE LUXUS 1974
BUICK RIVIERA (1971 - 1976)
CADILLAC COMMERCIAL CHASSIS (1977 - 1978)
CADILLAC FLEETWOOD (1977 - 1978)
CADILLAC FLEETWOOD FORMAL (1977 - 1978)
CHECKER MARATHON (1975 - 1979)
CHECKER MARATHON DELUXE (1971 - 1974)
CHEVROLET BEL AIR (1971 - 1975)
CHEVROLET BISCAYNE (1971 - 1972)
CHEVROLET BLAZER (1971 - 1978)
CHEVROLET BROOKWOOD (1971 - 1972)
CHEVROLET C10 PICKUP (1972 - 1978)
CHEVROLET C10 PICKUP BIG TEN 1978
CHEVROLET C20 PICKUP (1973 - 1986)
CHEVROLET C20 SUBURBAN (1973 - 1978)
CHEVROLET C30 PICKUP (1972 - 1978)
CHEVROLET CAPRICE (1971 - 1972)
CHEVROLET CAPRICE CLASSIC (1973 - 1976)
CHEVROLET CAPRICE ESTATE (1973 - 1976)
CHEVROLET G10 SPORTVAN (1975 - 1978)
CHEVROLET G10 VAN (1975 - 1978)
CHEVROLET G20 SPORTVAN (1971 - 1978)
CHEVROLET G20 VAN (1971 - 1978)
CHEVROLET G30 SPORTVAN (1972 - 1978)
CHEVROLET G30 VAN (1972 - 1978)
CHEVROLET IMPALA (1971 - 1976)
CHEVROLET IMPALA CUSTOM 1976
CHEVROLET K5 BLAZER 1976
CHEVROLET KINGSWOOD (1971 - 1972)
CHEVROLET KINGSWOOD ESTATE (1971 - 1972)
CHEVROLET P10 VAN (1972 - 1978)
CHEVROLET P20 VAN (1972 - 1978)
CHEVROLET P30 VAN (1971 - 1978)
CHEVROLET TOWNSMAN (1971 - 1972)
GMC C15 PICKUP (1975 - 1978)
GMC C15 PICKUP BIG TEN (1977 - 1978)
GMC C15/C1500 PICKUP (1972 - 1974)
GMC C25 PICKUP (1975 - 1978)
GMC C25 SUBURBAN (1975 - 1978)
GMC C25/C2500 PICKUP (1973 - 1974)
GMC C25/C2500 SUBURBAN (1973 - 1974)
GMC C2500 PICKUP (1979 - 1986)
GMC C35 PICKUP (1975 - 1978)
GMC C35/C3500 PICKUP (1972 - 1974)
GMC G15 VAN RALLY (1975 - 1978)
GMC G15 VANDURA (1975 - 1978)
GMC G25 VAN RALLY (1975 - 1978)
GMC G25 VANDURA (1975 - 1978)
GMC G25/G2500 VAN RALLY (1972 - 1974)
GMC G25/G2500 VANDURA (1972 - 1974)
GMC G35 VAN (1975 - 1978)
GMC G35 VAN RALLY (1975 - 1978)
GMC G35 VANDURA (1975 - 1978)
GMC G35/G3500 VAN 1974
GMC G35/G3500 VAN RALLY (1972 - 1974)
GMC G35/G3500 VANDURA (1972 - 1974)
GMC JIMMY (1971 - 1978)
GMC P15 VAN (1975 - 1978)
GMC P15/P1500 VAN (1972 - 1974)
GMC P25 VAN (1975 - 1978)
GMC P25/P2500 VAN (1972 - 1974)
GMC P35 VAN (1975 - 1978)
GMC P35/P3500 VAN (1971 - 1974)
OLDSMOBILE 98 (1971 - 1976)
OLDSMOBILE 98 REGENCY (1973 - 1976)
OLDSMOBILE CUSTOM CRUISER (1971 - 1976)
OLDSMOBILE DELTA 88 (1971 - 1976)
OLDSMOBILE DELTA 88 CUSTOM 1971
OLDSMOBILE DELTA 88 ROYALE (1971 - 1976)
PONTIAC BONNEVILLE (1971 - 1976)
PONTIAC BONNEVILLE BROUGHAM 1976
PONTIAC CATALINA (1971 - 1976)
PONTIAC CATALINA BROUGHAM (1971 - 1972)
PONTIAC CATALINA SAFARI (1971 - 1976)
PONTIAC GRAND SAFARI (1971 - 1976)
PONTIAC GRANDVILLE (1971 - 1974)
PONTIAC PARISIENNE 1976
__________________
I lost my 65 - Found it 25 years later:
http://67-72chevytrucks.com/vboard/s...d.php?t=426650

66 C20 Service Truck:
http://67-72chevytrucks.com/vboard/s...d.php?t=428035
LostMy65 is offline   Reply With Quote
Old 03-02-2012, 10:04 PM   #15
62LS1
Registered User
 
62LS1's Avatar
 
Join Date: Dec 2008
Location: Spring, TX
Posts: 54
Re: disk parts exchange ?'s

Go to www.cardone.com and use their parts lookup portion on the right hand side. Plug in the different vehicles and see if the part numbers come up the same.
__________________
Too many dreams, too little money.
62LS1 is offline   Reply With Quote
Old 03-02-2012, 10:44 PM   #16
LostMy65
But Found Her 25yrs Later!
 
LostMy65's Avatar
 
Join Date: Oct 2010
Location: Oregon City, Oregon
Posts: 10,530
Re: disk parts exchange ?'s

Thanks, I did that and they're the same.
Captainfab also assured me that they're the same.
Posted via Mobile Device
__________________
I lost my 65 - Found it 25 years later:
http://67-72chevytrucks.com/vboard/s...d.php?t=426650

66 C20 Service Truck:
http://67-72chevytrucks.com/vboard/s...d.php?t=428035
LostMy65 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:24 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com