Boyd Welding-67-72 Rear Mount Aluminum Tank - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

99-2door · 05-06-2010, 11:47 PM

Aw crap, hope I don't have the same problem since mine is a SWB coil spring truck. I don't remember the cross-member being like that though. Now I am gonna wonder until I get home tomorrow night.

Any updates Dave? I pm'd you. Thanks

8mpg · 05-07-2010, 03:18 AM

The crossmember is crooked from the factory. Pissed me off. I went to try and put a fuel cell in and it didnt fit...Fits on the drivers side, but not the pass.

BossHogg69 · 05-07-2010, 09:28 AM

Here's a link http://www.classicperform.com/Store/.../6372AGTBS.htm to a pic from CPP, their tank is just like Dave's, only the top rear corner is angled to fit up under the rearmost crossmember, allowing you to clear the angled crossmember that holds the track bar.

**Daveboyd** · 05-07-2010, 10:06 AM

I was unaware the crossmembers were that crooked. I will be changing the design. I will be monitoring this thread closely. I am here if you guys need me. just let me know. Ill do the best i can to help.

dave

**Daveboyd** · 05-07-2010, 10:07 AM

Quote:

Originally Posted by 99-2door

Aw crap, hope I don't have the same problem since mine is a SWB coil spring truck. I don't remember the cross-member being like that though. Now I am gonna wonder until I get home tomorrow night.

Any updates Dave? I pm'd you. Thanks

all remaining EFI tanks will be shipping today. yours included.

BossHogg69 · 05-07-2010, 10:17 AM

I'm guessing it's probably more cost effective for me to just find someone local to 'adjust' my tank. Shipping this thing back and forth again would be expensive.

**Daveboyd** · 05-07-2010, 11:39 AM

Quote:

Originally Posted by BossHogg69

I'm guessing it's probably more cost effective for me to just find someone local to 'adjust' my tank. Shipping this thing back and forth again would be expensive.

If you would like us to do the adjustments. you pay shipping back to us we will adjust the tank for a very small charge just to cover consumables and we will pay shipping back to you. here is an overview of what we will perform if you decide to go this route.

we will notch off the rear corner as much as possible. Reweld, pressure test and ensure the tank is safe and still covered under your warranty. Repackage and ship to you as fast as we can to reduce your downtime.

if you do decide to go to someone local and have your tank adjusted please understand that i can no longer warranty your tank.

99-2door · 05-08-2010, 05:32 PM

Dammit, I measured mine and it is the same as BossHogg's. I guess I will look into moving the rear crossmember back or replacing it with a straight piece. I wasn't expecting to have to do anything like this. I should have measured, but I assumed since the tank is designed for 67-72s it would fit.
Thanks for the update Dave.

**Daveboyd** · 05-17-2010, 06:16 PM

Quote:

Originally Posted by BossHogg69

I'm guessing it's probably more cost effective for me to just find someone local to 'adjust' my tank. Shipping this thing back and forth again would be expensive.

Your Tank was shipped back out to you today. You should have it a couple days.

GCncsuHD · 05-17-2010, 11:12 PM

Dave, what would be the price on a EFI setup tank now? I hate I missed the group buy. Also what is the expected build time on this, just a ballpark figure at the longest? I'm trying to get my 67 running/driving in time for my wedding in September. Also mine is a coil, swb, so I may need the same angled modification as BossHogg.

Thanks,
Garrett

**Daveboyd** · 05-19-2010, 11:13 AM

Quote:

Originally Posted by GCncsuHD

Dave, what would be the price on a EFI setup tank now? I hate I missed the group buy. Also what is the expected build time on this, just a ballpark figure at the longest? I'm trying to get my 67 running/driving in time for my wedding in September. Also mine is a coil, swb, so I may need the same angled modification as BossHogg.

Thanks,
Garrett

you have a pm

**Daveboyd** · 05-19-2010, 04:54 PM

Even though the group buy is over i wanted to make sure everyone could get a little discount. From now on if you have a Valid membership with this forum you get 10 % off any of our products and parts forever unless we are running a group buy.

THANK YOU FOR YOUR SUPPORT. Spread the word.

make sure you let me know your sn when you order. questions? Email me Directly daveboyd@boydwelding.com

6D8_C10 · 05-24-2010, 04:09 PM

Quote:

Originally Posted by GCncsuHD

Dave, what would be the price on a EFI setup tank now? I hate I missed the group buy. Also what is the expected build time on this, just a ballpark figure at the longest? I'm trying to get my 67 running/driving in time for my wedding in September. Also mine is a coil, swb, so I may need the same angled modification as BossHogg.

Thanks,
Garrett

Hey Dave, can you PM me too?
I too have a SWB with coils. Its a 71 frame.

Thanks

BossHogg69 · 05-26-2010, 11:28 PM

Dave - just got in from work today, tank came it last week. Looks good. I'll be calling you per your PM to get you paid for the extra mods. Thank you again for your dedication to working the kinks out on this deal. I will post pics when I get the tank installed tomorrow.

BossHogg69 · 05-29-2010, 04:58 PM

Quote:

Originally Posted by Daveboyd

Your Tank was shipped back out to you today. You should have it a couple days.

Here's what it looks like installed - fits perfect now!!! Thanks again Dave, your customer service and welding skills are first rate!

**Daveboyd** · 06-01-2010, 10:21 AM

Looks good

**Hart_Rod** · 06-01-2010, 10:57 AM

Any pictures of an EFI tank installed?

chris6499 · 06-12-2010, 01:29 AM

what is the price on the efi tank with sender and are you going to do another group by i will be ready in the next few weeks. also do you know if this tank will fit a 64 short bed

bgood70 · 06-14-2010, 02:06 PM

David

I missed group buy also but am interested in a tank for my 70 Chevy. I also have the angled frame. Sent PM but I will also email you directly as noted in this thread. Tanks look great.

**Daveboyd** · 06-14-2010, 02:37 PM

Hey everyone. Below is the new design for the standard and EFI tank. From now on all tanks will look like these and should fit your unmodified frames.

STANDARD NON EFI

EFI

Don't Forget to tell me your Forum name when you order so you can get your 10% discount.

6D8_C10 · 06-14-2010, 06:23 PM

Quote:

Originally Posted by Daveboyd

Hey everyone. Below is the new design for the standard and EFI tank. From now on all tanks will look like these and should fit your unmodified frames.

STANDARD NON EFI

EFI

Don't Forget to tell me your Forum name when you order so you can get your 10% discount.

Tanks Dave, I will be ordering mine soon.

chris6499 · 06-15-2010, 10:13 PM

what is the estimated time for an efi tank

**Daveboyd** · 06-25-2010, 01:32 PM

Quote:

Originally Posted by chris6499

what is the estimated time for an efi tank

Wow sorry man i just saw this post.. we are running at 7-10 business days but it seems that EFI tanks take longer for whatever reason. so i would say 2-4 weeks.

give me a call anytime if you have questions.

**Daveboyd** · 06-30-2010, 10:00 AM

Also if i understand correctly this new modified tank may fit the 63-72 tank.

70-Chevy · 07-11-2010, 12:53 AM

I'll be contacting you here shortly Dave about your modified tank. Looks sweet!

05-06-2010, 11:47 PM	#151
99-2door Registered User Join Date: Oct 2003 Location: Broken Bow, OK Posts: 1,385	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Aw crap, hope I don't have the same problem since mine is a SWB coil spring truck. I don't remember the cross-member being like that though. Now I am gonna wonder until I get home tomorrow night. Any updates Dave? I pm'd you. Thanks __________________ 95 K3500 SRW 5.7L Vortec 4L80e 4.10 G80 2001 GMC C3 6.0 AWD, Volant, 3/5 drop TBSS intake, HP tuners, pullies, 05 efans, 05 front brakes, etc. 2003 Tahoe Z71 Silverado front clip

05-07-2010, 03:18 AM	#152
8mpg Registered User Join Date: Aug 2008 Location: DFW, Texas Posts: 389	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank The crossmember is crooked from the factory. Pissed me off. I went to try and put a fuel cell in and it didnt fit...Fits on the drivers side, but not the pass.

05-07-2010, 09:28 AM	#153
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Here's a link http://www.classicperform.com/Store/.../6372AGTBS.htm to a pic from CPP, their tank is just like Dave's, only the top rear corner is angled to fit up under the rearmost crossmember, allowing you to clear the angled crossmember that holds the track bar. __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!! Last edited by BossHogg69; 05-07-2010 at 09:28 AM.

05-07-2010, 10:06 AM	#154
Daveboyd Senior Member Join Date: Sep 2009 Location: ocala, fl Posts: 270	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I was unaware the crossmembers were that crooked. I will be changing the design. I will be monitoring this thread closely. I am here if you guys need me. just let me know. Ill do the best i can to help. dave __________________ Dave Boyd View Our 63-72 C10 Tank options https://fueltankparts.com/collections/63-72-c10-tanks Boyd Welding Main Site : http://www.boydwelding.com/ Boyd Online Shop: https://fueltankparts.com/ E: Sales@boydwelding.com

05-07-2010, 10:17 AM	#156
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I'm guessing it's probably more cost effective for me to just find someone local to 'adjust' my tank. Shipping this thing back and forth again would be expensive. __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

05-08-2010, 05:32 PM	#158
99-2door Registered User Join Date: Oct 2003 Location: Broken Bow, OK Posts: 1,385	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Dammit, I measured mine and it is the same as BossHogg's. I guess I will look into moving the rear crossmember back or replacing it with a straight piece. I wasn't expecting to have to do anything like this. I should have measured, but I assumed since the tank is designed for 67-72s it would fit. Thanks for the update Dave. __________________ 95 K3500 SRW 5.7L Vortec 4L80e 4.10 G80 2001 GMC C3 6.0 AWD, Volant, 3/5 drop TBSS intake, HP tuners, pullies, 05 efans, 05 front brakes, etc. 2003 Tahoe Z71 Silverado front clip

05-17-2010, 11:12 PM	#160
GCncsuHD Charlie Daniels w/ a Tq Wrench Join Date: May 2009 Location: Statesville, NC Posts: 1,570	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Dave, what would be the price on a EFI setup tank now? I hate I missed the group buy. Also what is the expected build time on this, just a ballpark figure at the longest? I'm trying to get my 67 running/driving in time for my wedding in September. Also mine is a coil, swb, so I may need the same angled modification as BossHogg. Thanks, Garrett __________________ ΜΟΛΩΝ ΛΑΒΕ 67 C10 Shortbed "Great Grandpa's Truck" I6 3 on the Tree 71k original miles 5.3 swap in the works 69 K5 Blazer-Family Beach Cruiser Project 78 K30 Dually Semi-Retired Fire Truck 350/SM465 35"s SOLD01 2500HD ECSB 6.0 4x4 5.13's 8" lift 38"s Last edited by GCncsuHD; 05-17-2010 at 11:13 PM.

05-19-2010, 04:54 PM	#162
Daveboyd Senior Member Join Date: Sep 2009 Location: ocala, fl Posts: 270	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Even though the group buy is over i wanted to make sure everyone could get a little discount. From now on if you have a Valid membership with this forum you get 10 % off any of our products and parts forever unless we are running a group buy. THANK YOU FOR YOUR SUPPORT. Spread the word. make sure you let me know your sn when you order. questions? Email me Directly daveboyd@boydwelding.com __________________ Dave Boyd View Our 63-72 C10 Tank options https://fueltankparts.com/collections/63-72-c10-tanks Boyd Welding Main Site : http://www.boydwelding.com/ Boyd Online Shop: https://fueltankparts.com/ E: Sales@boydwelding.com

05-26-2010, 11:28 PM	#164
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Dave - just got in from work today, tank came it last week. Looks good. I'll be calling you per your PM to get you paid for the extra mods. Thank you again for your dedication to working the kinks out on this deal. I will post pics when I get the tank installed tomorrow. __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

06-01-2010, 10:21 AM	#166
Daveboyd Senior Member Join Date: Sep 2009 Location: ocala, fl Posts: 270	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Looks good __________________ Dave Boyd View Our 63-72 C10 Tank options https://fueltankparts.com/collections/63-72-c10-tanks Boyd Welding Main Site : http://www.boydwelding.com/ Boyd Online Shop: https://fueltankparts.com/ E: Sales@boydwelding.com

06-01-2010, 10:57 AM	#167
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Any pictures of an EFI tank installed? __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

06-12-2010, 01:29 AM	#168
chris6499 Registered User Join Date: Mar 2009 Location: mesa,az Posts: 58	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank what is the price on the efi tank with sender and are you going to do another group by i will be ready in the next few weeks. also do you know if this tank will fit a 64 short bed

06-14-2010, 02:06 PM	#169
bgood70 Registered User Join Date: Feb 2009 Location: Jacksonville Fl Posts: 180	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank David I missed group buy also but am interested in a tank for my 70 Chevy. I also have the angled frame. Sent PM but I will also email you directly as noted in this thread. Tanks look great. __________________ 70 C-10 SWB 350/700r4 Good 70 SWB Build 72 GMC Sprint SP Custom 350/Turbo300

06-14-2010, 02:37 PM	#170
Daveboyd Senior Member Join Date: Sep 2009 Location: ocala, fl Posts: 270	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Hey everyone. Below is the new design for the standard and EFI tank. From now on all tanks will look like these and should fit your unmodified frames. STANDARD NON EFI EFI Don't Forget to tell me your Forum name when you order so you can get your 10% discount. __________________ Dave Boyd View Our 63-72 C10 Tank options https://fueltankparts.com/collections/63-72-c10-tanks Boyd Welding Main Site : http://www.boydwelding.com/ Boyd Online Shop: https://fueltankparts.com/ E: Sales@boydwelding.com

06-15-2010, 10:13 PM	#172
chris6499 Registered User Join Date: Mar 2009 Location: mesa,az Posts: 58	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank what is the estimated time for an efi tank



Register or Log In To remove these advertisements.

06-30-2010, 10:00 AM	#174
Daveboyd Senior Member Join Date: Sep 2009 Location: ocala, fl Posts: 270	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Also if i understand correctly this new modified tank may fit the 63-72 tank. __________________ Dave Boyd View Our 63-72 C10 Tank options https://fueltankparts.com/collections/63-72-c10-tanks Boyd Welding Main Site : http://www.boydwelding.com/ Boyd Online Shop: https://fueltankparts.com/ E: Sales@boydwelding.com

07-11-2010, 12:53 AM	#175
70-Chevy -Chris Join Date: Sep 2002 Location: Moyock, NC Posts: 622	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I'll be contacting you here shortly Dave about your modified tank. Looks sweet!

Register or Log In To remove these advertisements.