|
05-08-2010, 10:03 PM
|
#1 |
|
Member of the longbed union.
Join Date: Feb 2009
Location: Killeen, Tx
Posts: 2,158
|
Help!
Alright guys I have a 64 that I back halfed. I'm running a SD wishbone. It has the stock 12 bolt.
Ok I measured from the drum mounting plate to the tube of the center section and got 20 1/8" on both sides. So I took my wish bone and put the axle brackets on it. Measured both sides and set the brackets the same from the center section. After tacking it up and looking at the front of the wishbone the pinion sits offset to the right of the piviot on the wishbone.
__________________
Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759 Last edited by ruffrida2005; 05-08-2010 at 10:46 PM. |
|
|
|
05-09-2010, 06:46 AM
|
#2 | |
|
just can't cover up my redneck
Join Date: May 2004
Location: Columbus OH
Posts: 11,414
|
Re: Help!
The pinion is not "centered" in the casting....but it doesn't matter anyway. As long as the wheels are centered under the body, go with it.
The u-joints need some angularity to work properly and it can be from any direction.
__________________
You can review the site's rules here. Quote:
Bad planning on your part does not necessarily constitute an instant emergency on my part.... The great thing about being a pessimist is that you are either pleasantly surprised or right. 
|
|
|
|
|
|
05-09-2010, 12:04 PM
|
#3 |
|
Member of the longbed union.
Join Date: Feb 2009
Location: Killeen, Tx
Posts: 2,158
|
Re: Help!
Thanks for the info Longhair.
__________________
Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759 |
|
|
|
|
05-09-2010, 02:17 PM
|
#4 |
|
Keepin it old school
Join Date: Jul 2008
Location: Ca
Posts: 672
|
Re: Help!
Yeah mine is like that too. as long as your wheels are center your good to go.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
