![]() |
![]() |
#1 |
Registered User
Join Date: Apr 2010
Location: N.Billerica Ma
Posts: 3
|
![]()
Hi everyone, I'm new to the site. I am restoring a 69 3/4 ton 4x4.it has a 4 speed (sm465). Dropped in my 454 with exhaust manifolds. Left manifold is blocking access to anchor clutch linkage to motor.Do i have to use headers and if so what would be best?Any help would be greatly appreiated.
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Feb 2000
Location: Center City, MN, USA
Posts: 3,254
|
Re: Big block exhaust???
I've never done this swap but realize that there are exactly ZERO factory 67-72 pieces that fit this application. The General never made a big block 4x4 until after 72. You may be able to find later 70s square body manifolds that work but I think most guys run headers when they do this swap or they have to "trim" the frame around the exhaust manifold.
__________________
'70 cab, '71 chassis, 383, TH350, NP205. '71 Malibu convertible '72 Malibu hard top Center City, MN |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Apr 2010
Location: Jeffersonville, Indiana
Posts: 136
|
Re: Big block exhaust???
Do yourself a favor and buy good set of headers. I have a 454 in my 71 4x4, and its a dream to work on with headers. Had manifolds on my 70, and it sucked!
Last edited by 1quik70; 05-11-2010 at 09:04 AM. |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Apr 2010
Location: N.Billerica Ma
Posts: 3
|
![]()
Thanks guys. I'll be ordering headers tonight. I hope clutch linkage clears.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|