What did you do to your truck today? - Page 54 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

willyp · 05-23-2010, 11:01 PM

That harness is made for that truck. Summit had the best price I could find and I got a free power braid kit to dress up all the wires with it valued at over $200. The 35 page installation instructions were pretty good, I thought it came with everything but I had to buy 2 plugs for the tail lights and 2 for the front turn signals. Didn’t really get to finish cause we went to the race in charlotte all day Saturday but could have knocked it out in a full weekend.

http://www.summitracing.com/parts/PRF-10112/

Slow Build · 05-23-2010, 11:12 PM

I'm doing the same thing I was doing yesterday and will be doing tomorrow. Trying to finish my oil change. I'm trying to deal with a leaking spin on filter adapter the the PO installed.

burbguy · 05-23-2010, 11:16 PM

I pulled the tranny crossmember from my parts truck, and also got the cab pulled from it as well, and swapped onto my swb. Looks way better, with a complete cab on it. I need to order the engine harness so that I can finish hooking up the big block...thats this weeks project...

fryer1979 · 05-23-2010, 11:16 PM

Quote:

Originally Posted by willyp

That harness is made for that truck. Summit had the best price I could find and I got a free power braid kit to dress up all the wires with it valued at over $200. The 35 page installation instructions were pretty good, I thought it came with everything but I had to buy 2 plugs for the tail lights and 2 for the front turn signals. Didn’t really get to finish cause we went to the race in charlotte all day Saturday but could have knocked it out in a full weekend.

http://www.summitracing.com/parts/PRF-10112/

Cool. Thanks for the link.

daverod · 05-23-2010, 11:46 PM

I did this.

losthope · 05-26-2010, 10:34 PM

well today i tryed to backup in the drive way for the first time since i dropped in the remand 350 and tranny and lost all gears shifter just flopped back and forth cable broke, so low on funds i decided to rob the gennie shifter off my 54 ford project and was back in buisness now i need to patch the floor and get a shifter boot and a knob!i also picked up a set of 6 lug wheels off of craigslist for 20 bucks.

old shifter

new shifter

wheels

*LILRED66* · 05-28-2010, 08:17 PM

It's going to be a good day Tater!

Did I mention, "I like '60-'66 Chevy/GMC trucks"?

**scotts62** · 05-28-2010, 08:32 PM

Now wait a minute there Tony, i dont see any wrap around windshields in there..

bubba327 · 05-28-2010, 11:07 PM

No short beds --No big back windows either -- Tony wait there is something wrong with this picture!!

But they still look good to me

Happy memorial day weekend to all

*LILRED66* · 05-28-2010, 11:15 PM

Birds of a feather, flock together. The '60-'63's are hanging together at the shop and the big back windows are at the paint shop.

**scotts62** · 05-28-2010, 11:41 PM

Ah i knew you had some in there somewhere

bubba327 · 05-29-2010, 12:07 AM

Ahhh... It is all good now .......... Thanks for clearing that up Tony

*lakeroadster* · 05-29-2010, 07:22 AM

Quote:

Originally Posted by LILRED66

It's going to be a good day Tater!

Did I mention, "I like '60-'66 Chevy/GMC trucks"?

And you really really like "Red and White" '60-'66 Chevy/GMC trucks!

**Chevy Fleetside** · 05-29-2010, 11:30 AM

I got some new parts for my truck but didn't do anything to the truck. I picked these up from Pick and pulls half price day. The Grill support was $18 and the carb was $25 and the Truions were in the bottom of the tool bag. OOps..

I paid $50 and some change for it all. I also snagged some bolts. Why not, they only fall on the ground and do nothing anyway.
There was only one ding in the grill support and the carb was a rebuilt one so I really don't know what I have. If it works then I won't have to rebuild my other one.

glendale · 05-29-2010, 02:43 PM

nothing to my truck. but i almost have this to driver status. and that is awesome i have been working on it for almost five years..

Slow Build · 05-29-2010, 03:23 PM

Quote:

Originally Posted by Chevy Fleetside

I picked these up from Pick and pulls half price day.

Good score.

1Bad62Pro/Street · 05-30-2010, 03:23 PM

Pushed the truck out in the grass yesterday to make room for a customers car...
She needed fresh air anyway!!!!!!!

Andice · 05-30-2010, 04:08 PM

I laid out the bed wood and strips yesterday. Slow progress with the truck at one location and the bed at another.

Andice · 05-30-2010, 04:27 PM

I purchased the nuts, bolts, washers, etc. today at Lowe's but they do not carry the correct size Forstner but to countersink the bed mounting washers. I ordered the bit online and will try to complete my fascia and rain gutter project in the meantime.

bubba327 · 05-30-2010, 05:11 PM

Quote:

Originally Posted by 1Bad62Pro/Street

Pushed the truck out in the grass yesterday to make room for a customers car...
She needed fresh air anyway!!!!!!!

Do not forget to change the air in the tires and put in the summer air

198plus · 05-30-2010, 05:53 PM

I see you did..........LMAO

Quote:

Originally Posted by daverod

I did this.

*lakeroadster* · 05-30-2010, 06:04 PM

Finally got the lower bearing for my C10 Steering Column (back ordered for 3 weeks). I assembled the column and reinstalled it. Lilred66 fixed me up with the correct upper housing and now the column looks "correct" for a floor shifted 4-speed manual tranny. (PO left the 3 on the tree column in it) Now I am waiting for the steering wheel.

Also retired the PO's Edelbrock "ignite-o-matic" foam air cleaner. Replaced it with an old school open air filter design. Now the Eldebrock unit is wall art.

markeb01 · 05-30-2010, 09:00 PM

After several months of weather delays, I finally got the opportunity to paint my wheels black. After a few more hours under the heat lamps they'll be back on by tomorrow.

*LILRED66* · 05-31-2010, 12:10 AM

Quote:

Originally Posted by lakeroadster

Finally got the lower bearing for my C10 Steering Column (back ordered for 3 weeks). I assembled the column and reinstalled it. Lilred66 fixed me up with the correct upper housing and now the column looks "correct" for a floor shifted 4-speed manual tranny. (PO left the 3 on the tree column in it) Now I am waiting for the steering wheel.

Also retired the PO's Edelbrock "ignite-o-matic" foam air cleaner. Replaced it with an old school open air filter design. Now the Eldebrock unit is wall art.

lake:

The signal harness goes inside the mast jacket cover, instead of routing out of the lower bonnet to daylight. The mast jacket cover is offset to keep the wires from rubbing between the mast jacket & mast jacket cover. Thanks for the honorable-mention. I am glad to see the parts worked for you.

*lakeroadster* · 05-31-2010, 08:13 AM

Quote:

Originally Posted by LILRED66

lake:

The signal harness goes inside the mast jacket cover, instead of routing out of the lower bonnet to daylight. The mast jacket cover is offset to keep the wires from rubbing between the mast jacket & mast jacket cover. Thanks for the honorable-mention. I am glad to see the parts worked for you.

I see, said the blind man! Looks like I will be dissassembling and then re-assembling. I am getting good at it

Thanks for the help!

05-23-2010, 11:01 PM	#1326
willyp Registered User Join Date: Nov 2008 Location: Houston TX Posts: 362	Re: What did you do to your truck today? That harness is made for that truck. Summit had the best price I could find and I got a free power braid kit to dress up all the wires with it valued at over $200. The 35 page installation instructions were pretty good, I thought it came with everything but I had to buy 2 plugs for the tail lights and 2 for the front turn signals. Didn’t really get to finish cause we went to the race in charlotte all day Saturday but could have knocked it out in a full weekend. http://www.summitracing.com/parts/PRF-10112/ __________________ The price of cool aint cheap.

05-23-2010, 11:12 PM	#1327
Slow Build Registered User Join Date: Sep 2009 Location: California Delta Posts: 2,163	Re: What did you do to your truck today? I'm doing the same thing I was doing yesterday and will be doing tomorrow. Trying to finish my oil change. I'm trying to deal with a leaking spin on filter adapter the the PO installed. Attached Images __________________ Name: Rich Current Ride: 1964 C-10 Short Fleetside Daily Driver: 2005 GMC crew cab short fleetside /2001 Chevy Tahoe Past GM Trucks: 1959 GMC short stepside 1968 GMC short stepside-4x4 1973 Chevy short stepside 1989 Chevy short fleetside-reg cab 1993 Chevy short fleetside-Xcab 2002 Chevy short fleetside-Xcab Save the dinosaurs, use synthetic oil.

05-23-2010, 11:16 PM	#1328
burbguy Registered User Join Date: Mar 2009 Location: Livermore,Ca. Posts: 114	Re: What did you do to your truck today? I pulled the tranny crossmember from my parts truck, and also got the cab pulled from it as well, and swapped onto my swb. Looks way better, with a complete cab on it. I need to order the engine harness so that I can finish hooking up the big block...thats this weeks project... __________________ Shawn 1966 short fleet 230 I-6 three in the tree (daily driver) 1966 short fleet big block th400 (building slowly) 1972 c10 3 door suburban 350 th350 (building faster than slowly) 2004 F250 power stroke (not dependable enough to be a daily driver) 2005 Kenworth T-800 Heavy Haul tractor (that's my true daily driver)

05-23-2010, 11:46 PM	#1330
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: What did you do to your truck today? I did this. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 05-23-2010 at 11:51 PM.

05-26-2010, 10:34 PM	#1331
losthope Registered User Join Date: Apr 2010 Location: sacramento ca. Posts: 1,038	Re: What did you do to your truck today? well today i tryed to backup in the drive way for the first time since i dropped in the remand 350 and tranny and lost all gears shifter just flopped back and forth cable broke, so low on funds i decided to rob the gennie shifter off my 54 ford project and was back in buisness now i need to patch the floor and get a shifter boot and a knob!i also picked up a set of 6 lug wheels off of craigslist for 20 bucks. old shifter new shifter wheels

05-28-2010, 08:17 PM	#1332
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: What did you do to your truck today? It's going to be a good day Tater! Did I mention, "I like '60-'66 Chevy/GMC trucks"? Attached Images

05-28-2010, 08:32 PM	#1333
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: What did you do to your truck today? Now wait a minute there Tony, i dont see any wrap around windshields in there.. __________________ Scott 93 crew cab build Project 62

05-28-2010, 11:07 PM	#1334
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: What did you do to your truck today? No short beds --No big back windows either -- Tony wait there is something wrong with this picture!! But they still look good to me Happy memorial day weekend to all __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project"

05-28-2010, 11:15 PM	#1335
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: What did you do to your truck today? Birds of a feather, flock together. The '60-'63's are hanging together at the shop and the big back windows are at the paint shop. Attached Images Last edited by LILRED66; 05-28-2010 at 11:16 PM.

05-28-2010, 11:41 PM	#1336
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: What did you do to your truck today? Ah i knew you had some in there somewhere __________________ Scott 93 crew cab build Project 62

05-29-2010, 12:07 AM	#1337
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: What did you do to your truck today? Ahhh... It is all good now .......... Thanks for clearing that up Tony __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project"

05-29-2010, 11:30 AM	#1339
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,782	Re: What did you do to your truck today? I got some new parts for my truck but didn't do anything to the truck. I picked these up from Pick and pulls half price day. The Grill support was $18 and the carb was $25 and the Truions were in the bottom of the tool bag. OOps.. I paid $50 and some change for it all. I also snagged some bolts. Why not, they only fall on the ground and do nothing anyway. There was only one ding in the grill support and the carb was a rebuilt one so I really don't know what I have. If it works then I won't have to rebuild my other one. Attached Images __________________ "A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536

05-29-2010, 02:43 PM	#1340
glendale Registered User Join Date: Jul 2009 Location: sacramento,ca Posts: 338	Re: What did you do to your truck today? nothing to my truck. but i almost have this to driver status. and that is awesome i have been working on it for almost five years..

05-30-2010, 03:23 PM	#1342
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: What did you do to your truck today? Pushed the truck out in the grass yesterday to make room for a customers car... She needed fresh air anyway!!!!!!! Attached Images __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

05-30-2010, 04:08 PM	#1343
Andice Registered User Join Date: Oct 2009 Location: Austin, Texas Posts: 241	Re: What did you do to your truck today? I laid out the bed wood and strips yesterday. Slow progress with the truck at one location and the bed at another. Attached Images



Register or Log In To remove these advertisements.

05-30-2010, 04:27 PM	#1344
Andice Registered User Join Date: Oct 2009 Location: Austin, Texas Posts: 241	Re: What did you do to your truck today? I purchased the nuts, bolts, washers, etc. today at Lowe's but they do not carry the correct size Forstner but to countersink the bed mounting washers. I ordered the bit online and will try to complete my fascia and rain gutter project in the meantime. Attached Images

05-30-2010, 06:04 PM	#1347
lakeroadster Account Suspended Join Date: Sep 2009 Location: High Plains of Colorado Posts: 2,485	Re: What did you do to your truck today? Finally got the lower bearing for my C10 Steering Column (back ordered for 3 weeks). I assembled the column and reinstalled it. Lilred66 fixed me up with the correct upper housing and now the column looks "correct" for a floor shifted 4-speed manual tranny. (PO left the 3 on the tree column in it) Now I am waiting for the steering wheel. Also retired the PO's Edelbrock "ignite-o-matic" foam air cleaner. Replaced it with an old school open air filter design. Now the Eldebrock unit is wall art. Attached Images Last edited by lakeroadster; 05-30-2010 at 06:05 PM.

05-30-2010, 09:00 PM	#1348
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: What did you do to your truck today? After several months of weather delays, I finally got the opportunity to paint my wheels black. After a few more hours under the heat lamps they'll be back on by tomorrow. __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502

Register or Log In To remove these advertisements.