Any ideas on the price of a 72 4x4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MR. GOODWRENCH · 05-28-2003, 08:50 PM

Ok,I when to look at a 72 4x4 today,and the man wants 1200 for it,the for sale sign in the truck says 1800,so he already came off 600 dollars,all the glass is broke but the door glass is good,and vent windows are good,fenders,cab supports,floor pans,inner fenders,radiator support,tailgate,rocker panals,and the bed are all full of rust,it has a bed liner in it and from what I could see under the bed,is that the bed is junk,no tow hooks,tires are dry rotted,and I am pretty sure it was a factory 6 cyl.,because of the radiator,and engine mounts,it does have a 350 with a 350 turbo,with an inch of dirt and oil build up on all the drivetrain,the glovebox sticker is gone,and he swears it is a cheyenne,it does have all the woodgrain trim and the woodgrain trim inside,the motor does run,I guess what I want to know is would it be an insult to offer him 500 or 600 for the truck or is that to much,I mean I know what the parts are worth but I see nothing body wise savageable the hood is dented to,I wish I had a picture but I hope I have disribed it enough for you guys to get an idea,thank you all.

1969 GMC · 05-28-2003, 10:31 PM

yuck...sounds like he wants too much...if you dont want to insult him by lowballing, you could always wait until he asks about what you want to offer, which shouldn't take long...

**Yukon Jack** · 05-29-2003, 12:26 PM

Sounds like all your really looking at is the frame and drivetrain. I would think $500 is about what that would be worth. Definitely not what he is asking for it.

Blazer1970 · 05-29-2003, 12:54 PM

Yup, $500 truck.

Baradium · 05-29-2003, 03:17 PM

I looked at a '71 GMC 2500 4x4 once.... he wanted $1600 for it and I didn't even contemplate making him any type of offer. Something about a transfer case shift lever that felt like it wasn't even hooked up and a transmission shifter that felt the same didn't help my opinion of the truck either. I would have driven it around the yard, once I finally got it to move I pulled it 5 ft forward, backed it up, and left. The truck had a chevy fender on one side, the GMC fender on the other. The GMC hood with a 71-72 chevy grill. I never did get the tailgate to open.... It needed so many new parts it just flat out wasn't worth it.

**old Rusty C10** · 05-29-2003, 06:12 PM

1200 is waay too much **** anything that needs that much work is junkyard quality and is worth no more than $300 in my book

05-28-2003, 08:50 PM	#1
MR. GOODWRENCH Registered User Join Date: Jan 2003 Location: Maryville,TN Posts: 402	Any ideas on the price of a 72 4x4 Ok,I when to look at a 72 4x4 today,and the man wants 1200 for it,the for sale sign in the truck says 1800,so he already came off 600 dollars,all the glass is broke but the door glass is good,and vent windows are good,fenders,cab supports,floor pans,inner fenders,radiator support,tailgate,rocker panals,and the bed are all full of rust,it has a bed liner in it and from what I could see under the bed,is that the bed is junk,no tow hooks,tires are dry rotted,and I am pretty sure it was a factory 6 cyl.,because of the radiator,and engine mounts,it does have a 350 with a 350 turbo,with an inch of dirt and oil build up on all the drivetrain,the glovebox sticker is gone,and he swears it is a cheyenne,it does have all the woodgrain trim and the woodgrain trim inside,the motor does run,I guess what I want to know is would it be an insult to offer him 500 or 600 for the truck or is that to much,I mean I know what the parts are worth but I see nothing body wise savageable the hood is dented to,I wish I had a picture but I hope I have disribed it enough for you guys to get an idea,thank you all. __________________ 68 CST SWB,full off frame restoration,72 GMC Sierra Grande SWB,72 Cheyenne 30 long wheelbase flatbed,2000 4door Chevy Dually bought new,2002 SS Camaro with 600 miles,bought it to put up,72 Monte Carlo,it was my first car,69 Impala with 50,000 miles,it was my dads,89 Dodge diseal 3/4 ton 4 wheel drive,my dad bought it new,68 Camaro RS dragcar,97 United Transporters 25 foot enclosed trailer,58 Oliver Super 77 Diseal,my grandfather bought new fully restored,55 Oliver Super 66 Diseal my uncle bought new,49 Oliver Rowcrop 88,51 Farmall H,51 Farmall Super C,81 Ford 3600,89 Ford 6610,49 Allis Chalmers WD45,81 Allis Chalmers 7060 my dad bought new,Allis Chalmers 175.

05-28-2003, 10:31 PM	#2
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	yuck...sounds like he wants too much...if you dont want to insult him by lowballing, you could always wait until he asks about what you want to offer, which shouldn't take long... __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

05-29-2003, 12:26 PM	#3
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,684	Sounds like all your really looking at is the frame and drivetrain. I would think $500 is about what that would be worth. Definitely not what he is asking for it. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

05-29-2003, 12:54 PM	#4
Blazer1970 Registered User Join Date: Dec 1999 Location: Old Mission, MI, USA Posts: 2,510	Yup, $500 truck. __________________ Tim

05-29-2003, 06:12 PM	#6
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,302	1200 is waay too much **** anything that needs that much work is junkyard quality and is worth no more than $300 in my book __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

05-29-2003, 03:17 PM	#5
Baradium Binder Rep Join Date: Jan 2001 Location: Salcha, AK Posts: 1,506	I looked at a '71 GMC 2500 4x4 once.... he wanted $1600 for it and I didn't even contemplate making him any type of offer. Something about a transfer case shift lever that felt like it wasn't even hooked up and a transmission shifter that felt the same didn't help my opinion of the truck either. I would have driven it around the yard, once I finally got it to move I pulled it 5 ft forward, backed it up, and left. The truck had a chevy fender on one side, the GMC fender on the other. The GMC hood with a 71-72 chevy grill. I never did get the tailgate to open.... It needed so many new parts it just flat out wasn't worth it.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.