MY build thread... - Page 13 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

baggedout81 · 07-08-2010, 06:54 PM

T-dog posts some pics

SRVBLUES64 · 07-08-2010, 08:10 PM

Quote:

Originally Posted by shortbed70

OK well It could take a while but it finally got started so here are some pics.
1964 swb,3.73 posi,361sbc\91 700r4. Heres some when I brought it home and some progress yesterday.

Troy etching primer is old school, you really only need a good epoxy primer I had the same question and everyone set me straight on the whole primer thing post pics soon

shortbed70 · 07-08-2010, 10:24 PM

I didnt end up using etch primer I used epoxy on bare steel then urethane after that. Thanks for posting I'm glad to see people still look at this thing even though its taking FOREVER. Well progress... Front bags are in and lines roughly routed until I get a tank now its time to get brakes and steering figured out then hang the front clip

shortbed70 · 07-08-2010, 10:39 PM

OK I dont remember what link I need to cut and past from photobucket to get video on here

SRVBLUES64 · 07-08-2010, 10:58 PM

Quote:

Originally Posted by shortbed70

OK I dont remember what link I need to cut and past from photobucket to get video on here

Im wondering did you put the truck back together before you painted and then take it back apart to paint it or just how did you or how are going to do it?

shortbed70 · 07-08-2010, 11:39 PM

Being the paint is satin black I'm painted pieces as I get them done. Cab and doors once,then fenders,now I'm working on the grill filler panel and inner fenders then the bed. The bed I havent even started on it yet. When I go to paint the truck the final color I am going to pull front clip as an assembly with hood then pull motor and probably pull the bed off. I was planning on jaming everything first like firewall,door jambs fender edges and back of cab and front of bed BUT couldnt afford paint and I wanted to drive this thing so satin black it was.

joe231 · 07-08-2010, 11:45 PM

Quote:

Originally Posted by shortbed70

OK I dont remember what link I need to cut and past from photobucket to get video on here

nice!
that has a lot of travel!

shortbed70 · 07-09-2010, 12:18 AM

Yea so much that it is putting my upper balljoint in a bind SO... I am looking for some balljoints that have more travel to them. It goes from the x member about 2" off the ground to the front suspension being completly locked up to where it cant lift anymore. It goes up slow now being off a blowgun but drops like a rock...Its going to be fun. Thanks for the comment.

baggedout81 · 07-09-2010, 05:01 PM

I'm still wondering about these ball joints.They might be the same bolt pattern but i'm not sure about the width if it will fit in the spindle

http://www.powerperformancemotorspor...&categoryId=17

bama63 · 07-09-2010, 08:23 PM

nice work!

shortbed70 · 07-10-2010, 12:38 AM

Thanks bama63. Mark those fricken things are 99 EA...Damn.

C10Slim · 07-13-2010, 10:08 PM

Do you have any more detail on the headers your running? Brand or even better model number?

shortbed70 · 07-13-2010, 10:58 PM

SUM G9001 or 9001-9 for ceramic. Summit brand right from the catalog. Keep in mind my motor is in an od location and I had to trim the pass side rail slightly to clear.

baggedout81 · 07-29-2010, 08:20 PM

Lets get them tanks mounted and start plumbing

nicke · 07-29-2010, 09:11 PM

looking really good!

shortbed70 · 07-30-2010, 08:24 PM

Sunday Sunday Sunday come one come all for the tank extravaganza! Just havin alittle fun.

shortbed70 · 08-06-2010, 12:33 AM

Well air tanks are mocked into place and trailer is loaded for blaster. Pics to come cause I got alot of work to do on the bed.

shortbed70 · 08-06-2010, 03:40 PM

Well wasted a trip to the blaster they told me last week they wanted to see it to estimate then I haul it there and now I have to take it back wednesday. Heres some pics of tanks mounted on truck and stuff before blaster. And my neew painted trailer.

**Captainfab** · 08-07-2010, 12:25 AM

What tailights is that rear pan set up for?

shortbed70 · 08-07-2010, 02:24 AM

They are the round trailer lights cheap! I think it's going to get cut off and do some flush mount lights. I am either going to have to fab up the tail pieces of the bed or quit being a tight ... And buy the pieces! We'll see what it looks like after the blaster

shortbed70 · 08-09-2010, 11:05 PM

Well guys just got my new driveshaft in and installed and now my next venture is I have to notch my trailing arm crossmember to be able to lay out. One step forward two steps back.... This should be fun with it in the truck and cab on frame. I will have plenty of pics as soon as I tear into it. Here I thought I was getting close to moving on its own power.

Alan's Classic · 08-09-2010, 11:09 PM

Trailer looks nice Troy!! Also nice progress on your truck.

shortbed70 · 08-10-2010, 12:03 AM

Thanks alan...

shortbed70 · 08-15-2010, 08:46 PM

Well actually made some progress today. I almost got the trans crossmember welded togather and decided to change the fluid in my trans while it was easy to get the pan off. Im waiting to get my parts back from the blaster so I can start on them and I need to get my cab up so I can work on rear crossmember for drive shaft clearance.

baggedout81 · 08-17-2010, 06:24 PM

There still not done w/ that bed.I'm gonna hate to see it when it gets back

The last big piece to the puzzle as far as the body goes

07-08-2010, 06:54 PM	#301
baggedout81 Registered User Join Date: Mar 2010 Location: manhattan KS Posts: 87	Re: MY build thread... T-dog posts some pics

07-08-2010, 10:24 PM	#303
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... I didnt end up using etch primer I used epoxy on bare steel then urethane after that. Thanks for posting I'm glad to see people still look at this thing even though its taking FOREVER. Well progress... Front bags are in and lines roughly routed until I get a tank now its time to get brakes and steering figured out then hang the front clip __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 Last edited by shortbed70; 07-08-2010 at 10:38 PM.

07-08-2010, 10:39 PM	#304
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... OK I dont remember what link I need to cut and past from photobucket to get video on here __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 Last edited by shortbed70; 07-08-2010 at 10:44 PM.

07-08-2010, 11:39 PM	#306
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Being the paint is satin black I'm painted pieces as I get them done. Cab and doors once,then fenders,now I'm working on the grill filler panel and inner fenders then the bed. The bed I havent even started on it yet. When I go to paint the truck the final color I am going to pull front clip as an assembly with hood then pull motor and probably pull the bed off. I was planning on jaming everything first like firewall,door jambs fender edges and back of cab and front of bed BUT couldnt afford paint and I wanted to drive this thing so satin black it was. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

07-09-2010, 12:18 AM	#308
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Yea so much that it is putting my upper balljoint in a bind SO... I am looking for some balljoints that have more travel to them. It goes from the x member about 2" off the ground to the front suspension being completly locked up to where it cant lift anymore. It goes up slow now being off a blowgun but drops like a rock...Its going to be fun. Thanks for the comment. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

07-09-2010, 05:01 PM	#309
baggedout81 Registered User Join Date: Mar 2010 Location: manhattan KS Posts: 87	Re: MY build thread... I'm still wondering about these ball joints.They might be the same bolt pattern but i'm not sure about the width if it will fit in the spindle http://www.powerperformancemotorspor...&categoryId=17

07-09-2010, 08:23 PM	#310
bama63 Registered User Join Date: Jun 2010 Location: gadsden, alabama Posts: 468	Re: MY build thread... nice work!

07-10-2010, 12:38 AM	#311
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Thanks bama63. Mark those fricken things are 99 EA...Damn. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

07-13-2010, 10:08 PM	#312
C10Slim Registered User Join Date: Jul 2009 Location: Needville, TX Posts: 283	Re: MY build thread... Do you have any more detail on the headers your running? Brand or even better model number?

07-13-2010, 10:58 PM	#313
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... SUM G9001 or 9001-9 for ceramic. Summit brand right from the catalog. Keep in mind my motor is in an od location and I had to trim the pass side rail slightly to clear. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

07-29-2010, 08:20 PM	#314
baggedout81 Registered User Join Date: Mar 2010 Location: manhattan KS Posts: 87	Re: MY build thread... Lets get them tanks mounted and start plumbing

07-29-2010, 09:11 PM	#315
nicke Registered User Join Date: Aug 2009 Location: Spokane, WA Posts: 503	Re: MY build thread... looking really good! __________________ 1965 Impala SS project Page. My Wheels Classic Nation My classic car videos

07-30-2010, 08:24 PM	#316
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Sunday Sunday Sunday come one come all for the tank extravaganza! Just havin alittle fun. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

08-06-2010, 12:33 AM	#317
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Well air tanks are mocked into place and trailer is loaded for blaster. Pics to come cause I got alot of work to do on the bed. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

08-06-2010, 03:40 PM	#318
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Well wasted a trip to the blaster they told me last week they wanted to see it to estimate then I haul it there and now I have to take it back wednesday. Heres some pics of tanks mounted on truck and stuff before blaster. And my neew painted trailer. Attached Images __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274



Register or Log In To remove these advertisements.

08-07-2010, 12:25 AM	#319
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: MY build thread... What tailights is that rear pan set up for? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

08-07-2010, 02:24 AM	#320
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... They are the round trailer lights cheap! I think it's going to get cut off and do some flush mount lights. I am either going to have to fab up the tail pieces of the bed or quit being a tight ... And buy the pieces! We'll see what it looks like after the blaster __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

08-09-2010, 11:05 PM	#321
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Well guys just got my new driveshaft in and installed and now my next venture is I have to notch my trailing arm crossmember to be able to lay out. One step forward two steps back.... This should be fun with it in the truck and cab on frame. I will have plenty of pics as soon as I tear into it. Here I thought I was getting close to moving on its own power. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

08-09-2010, 11:09 PM	#322
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: MY build thread... Trailer looks nice Troy!! Also nice progress on your truck. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

08-10-2010, 12:03 AM	#323
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Thanks alan... __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

08-15-2010, 08:46 PM	#324
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Well actually made some progress today. I almost got the trans crossmember welded togather and decided to change the fluid in my trans while it was easy to get the pan off. Im waiting to get my parts back from the blaster so I can start on them and I need to get my cab up so I can work on rear crossmember for drive shaft clearance. Attached Images __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 Last edited by shortbed70; 08-15-2010 at 08:49 PM.

08-17-2010, 06:24 PM	#325
baggedout81 Registered User Join Date: Mar 2010 Location: manhattan KS Posts: 87	Re: MY build thread... There still not done w/ that bed.I'm gonna hate to see it when it gets backThe last big piece to the puzzle as far as the body goes

Register or Log In To remove these advertisements.