Bunch of work done today. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

irishman999 · 07-10-2010, 01:10 AM

Converted to 3/4 ton axles, new wheels, tires and 4 inch superlift! What do you think? Just need some paint now!

86lovelongbeds · 07-10-2010, 01:15 AM

Looking sharp! What size tires and wheels? 35's on 15's?

Rollinsqrbdy · 07-10-2010, 01:15 AM

Dang it bud shes niccceeee. She looks sporting the old paint. How hard was it to change it over to 3/4 ton? I've got a 1/2 ton swb 4x4 i'd like to change over one day. Again, Your truck looks very good.

irishman999 · 07-10-2010, 01:19 AM

Thanks guys, Dexter Nm? Thats outside of Roswell right? im in Ruidoso right now.

irishman999 · 07-10-2010, 01:22 AM

Quote:

Originally Posted by 86lovelongbeds

Looking sharp! What size tires and wheels? 35's on 15's?

Nailed it, 35 inch BFG's. But they are 16 inch wheels.

*jake wells* · 07-10-2010, 04:24 AM

nice job wow im diggin the wheels and the 4'' lift but some advise.Don't paint it might get stolen

irishman999 · 07-10-2010, 05:02 AM

Yea im feeling guilty now, I was playing around on photoshop.

I did the two wheel slammed version but it would not upload.

grinch4om · 07-10-2010, 09:37 AM

VERY cool!

68 TT · 07-10-2010, 10:10 AM

Quote:

Originally Posted by Rollinsqrbdy

Dang it bud shes niccceeee. She looks sporting the old paint. How hard was it to change it over to 3/4 ton? I've got a 1/2 ton swb 4x4 i'd like to change over one day. Again, Your truck looks very good.

Ten years ago I did the swap from my old 81 K20 just before I sold it with my brothers 85 K5 Blazer to put my 3/4-ton axles & new wheels & tires onto his Blazer as his stuff was all shot.

Super simple swap as long as the U-bolts don't break. We did it in an hour or so.

I think we had to put in a conversion U-joint on the back, don't remember for sure though.

1LoC10 · 07-10-2010, 10:12 AM

sits real nice

irishman999 · 07-10-2010, 02:53 PM

As soon as i got a job again and some funds i was planning on painting and leaving it stock, but after that photoshop experience maybe i should jack it up and put some meats on it. But then again its gonna kill any gas mileage i plan on having.

Rollinsqrbdy · 07-11-2010, 03:33 AM

Quote:

Originally Posted by irishman999

Thanks guys, Dexter Nm? Thats outside of Roswell right? im in Ruidoso right now.

16 miles south of Roswell and 1 1/2 hours from Ruidoso. I love Ruidoso. Hey good luck with the truck and the funds.

ChaseDale3and8 · 07-29-2010, 02:07 PM

I like this truck. I used to own an '82 just like it a long time ago. Any new updates? ..Joe

*87 chevy silverado* · 07-29-2010, 02:20 PM

truck looks really good, but that is in the EXACT spot u took the pics of it on the trailer. To me looks photo shopped but is looks good as is.

Chionos GMs · 07-29-2010, 03:20 PM

Quote:

Originally Posted by 87 chevy silverado

truck looks really good, but that is in the EXACT spot u took the pics of it on the trailer. To me looks photo shopped but is looks good as is.

I agree

irishman999 · 07-29-2010, 04:03 PM

Quote:

Originally Posted by irishman999

Yea im feeling guilty now, I was playing around on photoshop.

I did the two wheel slammed version but it would not upload.

Yea its photoshop. It started as a prank.

Chionos GMs · 07-29-2010, 05:05 PM

Looks real good though. IMO some 16.5 rims with Super Swamper LTBs 35 x 15.50 16.5.

irishman999 · 07-29-2010, 05:42 PM

Quote:

Originally Posted by Chionos GMs

Looks real good though. IMO some 16.5 rims with Super Swamper LTBs 35 x 15.50 16.5.

My dad has a parts truck with a 4inch lift on it, dropped pitman arm and the steering stabilizer i planned on installing on my truck, Now im thinking about a new 2 inch lift or leaving it stock. I just got new tires, the next set i go with will probibly be 31x10 goodyear wranglers. Its always temping to lift it like in the picture!

BigRed76 · 07-29-2010, 11:13 PM

theres just somethin about a 4" lift and a set of 35's on a square body

grayharville · 07-30-2010, 12:17 AM

ahhh, photoshop got me, i was wondering why the rear tires were sittin so far forward in the wheelwells!

joebuick · 07-30-2010, 01:16 AM

Hmmmm, Dexter,NM I know where it is,,,,, ditto for Las Cruces,,, I live in Artesia,,,,,Bulldog country.
I kinda agree on the paint,,,if you make em too pretty,,,then you worry about if it will still be in the driveway when you go look. I primered my 80 K10 all over and not real sure when I'll throw some paint on it. I painted the interior last weekend in a silver/gray 2 tone and looks nice. I am going to Roswell tomorrow to pick up a seat out of a 90's Dodge (gasp) that is buckets with a center console that will match my paint scheme really good. I am going to get around to learning how to post pics here. Sure wish I had taken some when we began this project.

irishman999 · 07-30-2010, 02:43 AM

I just left Roswell this morning, very strange town. Artesia is cool, really love the refinery smell. www.photobucket.com is the easy to use. you just upload your pictures to it and you can get a code to post in your post. After you do it once its so simple.

85gmc2tone · 07-30-2010, 08:53 AM

nice

joebuick · 07-30-2010, 10:01 AM

Thanks irishmn, i'll give it a go later today

Low87 · 07-30-2010, 11:14 AM

Quote:

Originally Posted by irishman999

Yea its photoshop. It started as a prank.

Dang, I knew I should have called it! I thought the wheels/tires looked crisper than the truck. Looks good though, for a lift

07-10-2010, 01:10 AM	#1
irishman999 Registered User Join Date: May 2010 Location: Reno Ne-VAH-da Posts: 594	Bunch of work done today. Converted to 3/4 ton axles, new wheels, tires and 4 inch superlift! What do you think? Just need some paint now!

07-10-2010, 01:15 AM	#2
86lovelongbeds Registered User Join Date: Jun 2010 Location: Poplar Bluff, Mo Posts: 24	Re: Bunch of work done today. Looking sharp! What size tires and wheels? 35's on 15's?

07-10-2010, 01:15 AM	#3
Rollinsqrbdy Registered User Join Date: Aug 2008 Location: Dexter, N.M. Posts: 1,082	Re: Bunch of work done today. Dang it bud shes niccceeee. She looks sporting the old paint. How hard was it to change it over to 3/4 ton? I've got a 1/2 ton swb 4x4 i'd like to change over one day. Again, Your truck looks very good. __________________ Its Kool to be a square 2013 Chevy Silverado Z71 w/ 7" lift and 35" Nitto's 1985 C-10 ......My dream truck (under construction) 1984 k 10 Silverado...6" lift with 38.5 super swampers New Mexico Member --- Member of the Square Body Club---

07-10-2010, 01:19 AM	#4
irishman999 Registered User Join Date: May 2010 Location: Reno Ne-VAH-da Posts: 594	Re: Bunch of work done today. Thanks guys, Dexter Nm? Thats outside of Roswell right? im in Ruidoso right now.

07-10-2010, 04:24 AM	#6
jake wells Account Suspended Join Date: Sep 2009 Location: No Longer Here Posts: 352	Re: Bunch of work done today. nice job wow im diggin the wheels and the 4'' lift but some advise.Don't paint it might get stolen

07-10-2010, 05:02 AM	#7
irishman999 Registered User Join Date: May 2010 Location: Reno Ne-VAH-da Posts: 594	Re: Bunch of work done today. Yea im feeling guilty now, I was playing around on photoshop. I did the two wheel slammed version but it would not upload.

07-10-2010, 09:37 AM	#8
grinch4om dang its hot Join Date: Nov 2006 Location: frankfort kentucky Posts: 1,349	Re: Bunch of work done today. VERY cool!

07-10-2010, 10:12 AM	#10
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: Bunch of work done today. sits real nice __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

07-10-2010, 02:53 PM	#11
irishman999 Registered User Join Date: May 2010 Location: Reno Ne-VAH-da Posts: 594	Re: Bunch of work done today. As soon as i got a job again and some funds i was planning on painting and leaving it stock, but after that photoshop experience maybe i should jack it up and put some meats on it. But then again its gonna kill any gas mileage i plan on having.

07-29-2010, 02:07 PM	#13
ChaseDale3and8 Registered User Join Date: Jun 2007 Location: Springfield Mo. Posts: 1,086	Re: Bunch of work done today. I like this truck. I used to own an '82 just like it a long time ago. Any new updates? ..Joe __________________ I'm not speedin'! I'm qualifyin'!

07-29-2010, 02:20 PM	#14
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: Bunch of work done today. truck looks really good, but that is in the EXACT spot u took the pics of it on the trailer. To me looks photo shopped but is looks good as is.

07-29-2010, 05:05 PM	#17
Chionos GMs Registered User Join Date: Jun 2010 Location: Farmington,CA Posts: 345	Re: Bunch of work done today. Looks real good though. IMO some 16.5 rims with Super Swamper LTBs 35 x 15.50 16.5. __________________ My last name is Chiono pronounced key-ono even if my grammar teacher told me Ch dont make a K sound 1995 Ext. cab 350 4wd dd 260,*** miles 1986 1/2 ton swb 305 2wd (melted bearings) SOLD!! 1982 3/4 lwb 6.2 diesel 2wd 1962 Chevy 283 4 speed long step 2wd 2 OWNER GONE!!

07-29-2010, 11:13 PM	#19
BigRed76 Registered User Join Date: Jan 2010 Location: Loveland, CO Posts: 1,921	Re: Bunch of work done today. theres just somethin about a 4" lift and a set of 35's on a square body __________________ Zach 1970 Chevrolet Custom Camper K20 1971 GMC Super K2500, 12V/NV4500 swap in progress 1971 Chevrolet Custom C10 1972 Chevrolet Custom Deluxe C20, 5.3/4L60E 1972 Oldsmobile Cutlass Supreme, 455/TH400, 3.73 posi 2004 GMC Sierra 2500HD, LB7/Allison, CCSB 2005 GMC Sierra 1500, 5.3/4L60E, CCSB

07-30-2010, 12:17 AM	#20
grayharville ^^who I am^^ what I say> Join Date: Jun 2009 Location: Murchison, Tx Posts: 992	Re: Bunch of work done today. ahhh, photoshop got me, i was wondering why the rear tires were sittin so far forward in the wheelwells! __________________ 70 chevy LWB 350/TH350 Barn find (AKA the 70) http://www.67-72chevytrucks.com/vboa...d.php?t=406364 East Tx Squares

07-30-2010, 01:16 AM	#21
joebuick Registered User Join Date: May 2010 Location: Cottonwood,NM Posts: 44	Re: Bunch of work done today. Hmmmm, Dexter,NM I know where it is,,,,, ditto for Las Cruces,,, I live in Artesia,,,,,Bulldog country. I kinda agree on the paint,,,if you make em too pretty,,,then you worry about if it will still be in the driveway when you go look. I primered my 80 K10 all over and not real sure when I'll throw some paint on it. I painted the interior last weekend in a silver/gray 2 tone and looks nice. I am going to Roswell tomorrow to pick up a seat out of a 90's Dodge (gasp) that is buckets with a center console that will match my paint scheme really good. I am going to get around to learning how to post pics here. Sure wish I had taken some when we began this project.



Register or Log In To remove these advertisements.

07-30-2010, 02:43 AM	#22
irishman999 Registered User Join Date: May 2010 Location: Reno Ne-VAH-da Posts: 594	Re: Bunch of work done today. I just left Roswell this morning, very strange town. Artesia is cool, really love the refinery smell. www.photobucket.com is the easy to use. you just upload your pictures to it and you can get a code to post in your post. After you do it once its so simple.

07-30-2010, 08:53 AM	#23
85gmc2tone Registered User Join Date: Jun 2009 Location: greenwood arkansas Posts: 61	Re: Bunch of work done today. nice

07-30-2010, 10:01 AM	#24
joebuick Registered User Join Date: May 2010 Location: Cottonwood,NM Posts: 44	Re: Bunch of work done today. Thanks irishmn, i'll give it a go later today

Register or Log In To remove these advertisements.