53 BURBAN barn find - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ory Gun · 07-11-2010, 12:28 AM

Insane, Looks great Chizzler.......Very clean.

Frizzle Fry · 07-12-2010, 11:56 AM

Just found this Chizz. Nice!!!

**CHIZZLER** · 07-13-2010, 10:14 PM

Here are a few pics from last night.we worked from 7:00 till 1:00 in the morning.we got the rolling chassie all mocked up. Only a few minor details to deal with. we made the step notches longer to fit the frame better. should be bringing it back this week.scored some steel 15x5 black smoothies at a local swap meet for $60 bucks. Going to get some tires put on this week for fitment. sorry about the bad pics.

bjcaldwe · 07-13-2010, 10:17 PM

Looking good.

**CHIZZLER** · 07-17-2010, 06:51 PM

well here is the rolling chassie.got home about two hours ago.tell me what you think.right know running boards are about 2.5" off the ground.it can go lower but we will need to clearance the back wheel wells a little.

Scottshotrods · 07-17-2010, 08:03 PM

Looks good, I say raise the rear wells and go lower.
Justin
www.scottshotrods.com

**CHIZZLER** · 07-17-2010, 09:19 PM

Running board will be on the ground.we also will need to clearance the top ball joints.they lock up before laying out.

**LEEVON** · 07-17-2010, 09:38 PM

I think it looks great and deserves a phrase that I retired decades ago. RAD!

Frizzle Fry · 07-18-2010, 01:52 AM

Boom! Can't wait to see this puppy in person.

**CHIZZLER** · 07-18-2010, 02:19 AM

Thanks frizzle,leevon.tryin to get as much done as i can.the guy i worked on the chassie with was awesome.fast and precise.next week it will be going back out to his shop to mock up motor and tranny.next will be all the other stuff(fuel,brakes,steering.wiring) thanks for the support.

**CHIZZLER** · 07-27-2010, 01:20 AM

Worked on the air bags this weekend.back dosnt have enough lift.firestone 9000.going to need taller bags or run 2" cups.

Scottshotrods · 07-27-2010, 01:22 AM

Danny call me on tuesday at the shop (805)485-0382
Justin
www.scottshotrods.com

**CHIZZLER** · 07-27-2010, 01:47 AM

I will call you this week. I need some other stuff.thanks

**CHIZZLER** · 08-17-2010, 01:35 AM

Sorry guys. Been real busy with work.will post some pics later this week.got the motor mocked up with sb 350 and 700r4.been working on tunneling the floor and replacing the floor pans.going to use a 70 mustang tank behind the rear axle.also got a ididit column and cpp booster coming.

**CHIZZLER** · 08-23-2010, 05:09 PM

anyone have any pics of any aftermarket radiators.looking to order one very soon.wondering what size and how well it fit.thanks.

jephs422 · 08-23-2010, 05:47 PM

we (Scott's) are a dealer for US radiator. I'm sure Justin will give you a smoking deal on one.

Give me an idea of what you are looking for (aluminum, steel, 2-4 core?) and I'll be sure to get you a quote.

jephs422 · 08-23-2010, 06:25 PM

A standard 4 core brass radiator retail is $430. The all aluminum 2 core is $370

I'm sure Justin will do 10% so the brass 4 core would run $387, the aluminum 2 core would run $333.

Give us a call!

**CHIZZLER** · 08-23-2010, 08:16 PM

thanks jeph.i will talk to justin this week.

Laid_Out_50 · 08-23-2010, 08:23 PM

i like it

Scottshotrods · 08-23-2010, 09:10 PM

Hit is up and you will get a great package.Danny I am leaving for a show this wed I will
not be back till next tue in the shop.Call me up and I will take care of you.
Justin

**CHIZZLER** · 08-23-2010, 09:35 PM

thanks justin.i will call you next week.work is kickin my a** right know.

**CHIZZLER** · 08-28-2010, 10:50 PM

Well guys here are some new pics.got most of the sheet metal in for the floor.got the wheel tubs in.built the tranny hump.using a 70 mustang tank and relocated the filler to the rear corner.found some bad patch work on the rear wheel opening.still working on it.mocked up the motor and tranny and finalized the motor mounts.got the new column and brake booster setup.more to come.thanks for lookin.

**CHIZZLER** · 08-28-2010, 10:51 PM

Few more.

panelrodder81 · 09-01-2010, 06:34 PM

In the photo of the rear wheel opening, is that a patch you had to do up at the top? I see a faint outline of what looks like a patch panel. Reason I ask is I have one in the almost the exact spot on the same side. Was kind of wondering if that is common problem on these beasts.

**CHIZZLER** · 09-01-2010, 07:33 PM

Because they have sliding side windows this is a very common spot for rust.if you look under the window you will see drain tubes that allow the water to go down.i will be using one piece windows to solve this problem.we made the patch panel by using small pieces.

07-11-2010, 12:28 AM	#126
Ory Gun Registered User Join Date: Mar 2010 Location: West Linn, Oregon Posts: 32	Re: 53 BURBAN barn find Insane, Looks great Chizzler.......Very clean.

07-12-2010, 11:56 AM	#127
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: 53 BURBAN barn find Just found this Chizz. Nice!!!

07-13-2010, 10:14 PM	#128
CHIZZLER SAVING ONE TRUCK AT A TIME Join Date: Feb 2010 Location: sherwood oregon Posts: 1,141	Re: 53 BURBAN barn find Here are a few pics from last night.we worked from 7:00 till 1:00 in the morning.we got the rolling chassie all mocked up. Only a few minor details to deal with. we made the step notches longer to fit the frame better. should be bringing it back this week.scored some steel 15x5 black smoothies at a local swap meet for $60 bucks. Going to get some tires put on this week for fitment. sorry about the bad pics. Attached Images __________________ 53-suburban (99% done) 40-pick up (99.9% done) 12-cc lb dually D-max (dd) 61-crew cab D-max "PAY LESS FOR WHAT YOU NEED PAY MORE FOR WHAT YOU WANT" 53 BURBAN BARN FIND:http://67-72chevytrucks.com/vboard/s...d.php?t=404091 1940 PROJECT MOON SHINE:http://67-72chevytrucks.com/vboard/s...d.php?t=551088 1961 CREW MAX: http://67-72chevytrucks.com/vboard/s....php?p=6957999

07-13-2010, 10:17 PM	#129
bjcaldwe Registered User Join Date: Aug 2009 Location: OKC, OK Posts: 1,169	Re: 53 BURBAN barn find Looking good. __________________ My AD Truck Build Thread 52 GMC one day laying on the running boards 2004 Chevy Crewcab. 3/5 and notched

07-17-2010, 06:51 PM	#130
CHIZZLER SAVING ONE TRUCK AT A TIME Join Date: Feb 2010 Location: sherwood oregon Posts: 1,141	Re: 53 BURBAN barn find well here is the rolling chassie.got home about two hours ago.tell me what you think.right know running boards are about 2.5" off the ground.it can go lower but we will need to clearance the back wheel wells a little. Attached Images __________________ 53-suburban (99% done) 40-pick up (99.9% done) 12-cc lb dually D-max (dd) 61-crew cab D-max "PAY LESS FOR WHAT YOU NEED PAY MORE FOR WHAT YOU WANT" 53 BURBAN BARN FIND:http://67-72chevytrucks.com/vboard/s...d.php?t=404091 1940 PROJECT MOON SHINE:http://67-72chevytrucks.com/vboard/s...d.php?t=551088 1961 CREW MAX: http://67-72chevytrucks.com/vboard/s....php?p=6957999

07-17-2010, 08:03 PM	#131
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: 53 BURBAN barn find Looks good, I say raise the rear wells and go lower. Justin www.scottshotrods.com

07-17-2010, 09:19 PM	#132
CHIZZLER SAVING ONE TRUCK AT A TIME Join Date: Feb 2010 Location: sherwood oregon Posts: 1,141	Re: 53 BURBAN barn find Running board will be on the ground.we also will need to clearance the top ball joints.they lock up before laying out. __________________ 53-suburban (99% done) 40-pick up (99.9% done) 12-cc lb dually D-max (dd) 61-crew cab D-max "PAY LESS FOR WHAT YOU NEED PAY MORE FOR WHAT YOU WANT" 53 BURBAN BARN FIND:http://67-72chevytrucks.com/vboard/s...d.php?t=404091 1940 PROJECT MOON SHINE:http://67-72chevytrucks.com/vboard/s...d.php?t=551088 1961 CREW MAX: http://67-72chevytrucks.com/vboard/s....php?p=6957999

07-17-2010, 09:38 PM	#133
LEEVON Moderator Join Date: Jul 2006 Location: Ozark, MO Posts: 4,893	Re: 53 BURBAN barn find I think it looks great and deserves a phrase that I retired decades ago. RAD! __________________ '86 GMC C30 Crew ~ '86 C20 Crew ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '74K10 ~ '71 Cheyenne swb ~'50 3100 bagged ~ '80 Wife ~ Late model kids

07-18-2010, 01:52 AM	#134
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: 53 BURBAN barn find Boom! Can't wait to see this puppy in person.

07-18-2010, 02:19 AM	#135
CHIZZLER SAVING ONE TRUCK AT A TIME Join Date: Feb 2010 Location: sherwood oregon Posts: 1,141	Re: 53 BURBAN barn find Thanks frizzle,leevon.tryin to get as much done as i can.the guy i worked on the chassie with was awesome.fast and precise.next week it will be going back out to his shop to mock up motor and tranny.next will be all the other stuff(fuel,brakes,steering.wiring) thanks for the support. __________________ 53-suburban (99% done) 40-pick up (99.9% done) 12-cc lb dually D-max (dd) 61-crew cab D-max "PAY LESS FOR WHAT YOU NEED PAY MORE FOR WHAT YOU WANT" 53 BURBAN BARN FIND:http://67-72chevytrucks.com/vboard/s...d.php?t=404091 1940 PROJECT MOON SHINE:http://67-72chevytrucks.com/vboard/s...d.php?t=551088 1961 CREW MAX: http://67-72chevytrucks.com/vboard/s....php?p=6957999

07-27-2010, 01:20 AM	#136
CHIZZLER SAVING ONE TRUCK AT A TIME Join Date: Feb 2010 Location: sherwood oregon Posts: 1,141	Re: 53 BURBAN barn find Worked on the air bags this weekend.back dosnt have enough lift.firestone 9000.going to need taller bags or run 2" cups. __________________ 53-suburban (99% done) 40-pick up (99.9% done) 12-cc lb dually D-max (dd) 61-crew cab D-max "PAY LESS FOR WHAT YOU NEED PAY MORE FOR WHAT YOU WANT" 53 BURBAN BARN FIND:http://67-72chevytrucks.com/vboard/s...d.php?t=404091 1940 PROJECT MOON SHINE:http://67-72chevytrucks.com/vboard/s...d.php?t=551088 1961 CREW MAX: http://67-72chevytrucks.com/vboard/s....php?p=6957999

07-27-2010, 01:22 AM	#137
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: 53 BURBAN barn find Danny call me on tuesday at the shop (805)485-0382 Justin www.scottshotrods.com

07-27-2010, 01:47 AM	#138
CHIZZLER SAVING ONE TRUCK AT A TIME Join Date: Feb 2010 Location: sherwood oregon Posts: 1,141	Re: 53 BURBAN barn find I will call you this week. I need some other stuff.thanks __________________ 53-suburban (99% done) 40-pick up (99.9% done) 12-cc lb dually D-max (dd) 61-crew cab D-max "PAY LESS FOR WHAT YOU NEED PAY MORE FOR WHAT YOU WANT" 53 BURBAN BARN FIND:http://67-72chevytrucks.com/vboard/s...d.php?t=404091 1940 PROJECT MOON SHINE:http://67-72chevytrucks.com/vboard/s...d.php?t=551088 1961 CREW MAX: http://67-72chevytrucks.com/vboard/s....php?p=6957999

08-17-2010, 01:35 AM	#139
CHIZZLER SAVING ONE TRUCK AT A TIME Join Date: Feb 2010 Location: sherwood oregon Posts: 1,141	Re: 53 BURBAN barn find Sorry guys. Been real busy with work.will post some pics later this week.got the motor mocked up with sb 350 and 700r4.been working on tunneling the floor and replacing the floor pans.going to use a 70 mustang tank behind the rear axle.also got a ididit column and cpp booster coming. __________________ 53-suburban (99% done) 40-pick up (99.9% done) 12-cc lb dually D-max (dd) 61-crew cab D-max "PAY LESS FOR WHAT YOU NEED PAY MORE FOR WHAT YOU WANT" 53 BURBAN BARN FIND:http://67-72chevytrucks.com/vboard/s...d.php?t=404091 1940 PROJECT MOON SHINE:http://67-72chevytrucks.com/vboard/s...d.php?t=551088 1961 CREW MAX: http://67-72chevytrucks.com/vboard/s....php?p=6957999

08-23-2010, 05:09 PM	#140
CHIZZLER SAVING ONE TRUCK AT A TIME Join Date: Feb 2010 Location: sherwood oregon Posts: 1,141	Re: 53 BURBAN barn find anyone have any pics of any aftermarket radiators.looking to order one very soon.wondering what size and how well it fit.thanks. __________________ 53-suburban (99% done) 40-pick up (99.9% done) 12-cc lb dually D-max (dd) 61-crew cab D-max "PAY LESS FOR WHAT YOU NEED PAY MORE FOR WHAT YOU WANT" 53 BURBAN BARN FIND:http://67-72chevytrucks.com/vboard/s...d.php?t=404091 1940 PROJECT MOON SHINE:http://67-72chevytrucks.com/vboard/s...d.php?t=551088 1961 CREW MAX: http://67-72chevytrucks.com/vboard/s....php?p=6957999



Register or Log In To remove these advertisements.

08-23-2010, 05:47 PM	#141
jephs422 Registered User Join Date: Jun 2008 Location: Oxnard CA Posts: 301	Re: 53 BURBAN barn find we (Scott's) are a dealer for US radiator. I'm sure Justin will give you a smoking deal on one. Give me an idea of what you are looking for (aluminum, steel, 2-4 core?) and I'll be sure to get you a quote. __________________ Jeff Savaglio Scott's Hotrods Oxnard CA 93030

08-23-2010, 06:25 PM	#142
jephs422 Registered User Join Date: Jun 2008 Location: Oxnard CA Posts: 301	Re: 53 BURBAN barn find A standard 4 core brass radiator retail is $430. The all aluminum 2 core is $370 I'm sure Justin will do 10% so the brass 4 core would run $387, the aluminum 2 core would run $333. Give us a call! __________________ Jeff Savaglio Scott's Hotrods Oxnard CA 93030

08-23-2010, 08:16 PM	#143
CHIZZLER SAVING ONE TRUCK AT A TIME Join Date: Feb 2010 Location: sherwood oregon Posts: 1,141	Re: 53 BURBAN barn find thanks jeph.i will talk to justin this week. __________________ 53-suburban (99% done) 40-pick up (99.9% done) 12-cc lb dually D-max (dd) 61-crew cab D-max "PAY LESS FOR WHAT YOU NEED PAY MORE FOR WHAT YOU WANT" 53 BURBAN BARN FIND:http://67-72chevytrucks.com/vboard/s...d.php?t=404091 1940 PROJECT MOON SHINE:http://67-72chevytrucks.com/vboard/s...d.php?t=551088 1961 CREW MAX: http://67-72chevytrucks.com/vboard/s....php?p=6957999

08-23-2010, 08:23 PM	#144
Laid_Out_50 Registered User Join Date: Aug 2009 Location: Bay Area Cali Posts: 270	Re: 53 BURBAN barn find i like it

08-23-2010, 09:10 PM	#145
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: 53 BURBAN barn find Hit is up and you will get a great package.Danny I am leaving for a show this wed I will not be back till next tue in the shop.Call me up and I will take care of you. Justin

08-23-2010, 09:35 PM	#146
CHIZZLER SAVING ONE TRUCK AT A TIME Join Date: Feb 2010 Location: sherwood oregon Posts: 1,141	Re: 53 BURBAN barn find thanks justin.i will call you next week.work is kickin my a** right know. __________________ 53-suburban (99% done) 40-pick up (99.9% done) 12-cc lb dually D-max (dd) 61-crew cab D-max "PAY LESS FOR WHAT YOU NEED PAY MORE FOR WHAT YOU WANT" 53 BURBAN BARN FIND:http://67-72chevytrucks.com/vboard/s...d.php?t=404091 1940 PROJECT MOON SHINE:http://67-72chevytrucks.com/vboard/s...d.php?t=551088 1961 CREW MAX: http://67-72chevytrucks.com/vboard/s....php?p=6957999

08-28-2010, 10:50 PM	#147
CHIZZLER SAVING ONE TRUCK AT A TIME Join Date: Feb 2010 Location: sherwood oregon Posts: 1,141	Re: 53 BURBAN barn find Well guys here are some new pics.got most of the sheet metal in for the floor.got the wheel tubs in.built the tranny hump.using a 70 mustang tank and relocated the filler to the rear corner.found some bad patch work on the rear wheel opening.still working on it.mocked up the motor and tranny and finalized the motor mounts.got the new column and brake booster setup.more to come.thanks for lookin. Attached Images __________________ 53-suburban (99% done) 40-pick up (99.9% done) 12-cc lb dually D-max (dd) 61-crew cab D-max "PAY LESS FOR WHAT YOU NEED PAY MORE FOR WHAT YOU WANT" 53 BURBAN BARN FIND:http://67-72chevytrucks.com/vboard/s...d.php?t=404091 1940 PROJECT MOON SHINE:http://67-72chevytrucks.com/vboard/s...d.php?t=551088 1961 CREW MAX: http://67-72chevytrucks.com/vboard/s....php?p=6957999

08-28-2010, 10:51 PM	#148
CHIZZLER SAVING ONE TRUCK AT A TIME Join Date: Feb 2010 Location: sherwood oregon Posts: 1,141	Re: 53 BURBAN barn find Few more. Attached Images __________________ 53-suburban (99% done) 40-pick up (99.9% done) 12-cc lb dually D-max (dd) 61-crew cab D-max "PAY LESS FOR WHAT YOU NEED PAY MORE FOR WHAT YOU WANT" 53 BURBAN BARN FIND:http://67-72chevytrucks.com/vboard/s...d.php?t=404091 1940 PROJECT MOON SHINE:http://67-72chevytrucks.com/vboard/s...d.php?t=551088 1961 CREW MAX: http://67-72chevytrucks.com/vboard/s....php?p=6957999

09-01-2010, 06:34 PM	#149
panelrodder81 Doin' it live! Join Date: Jan 2010 Location: Eagle Mountain, Utah Posts: 471	Re: 53 BURBAN barn find In the photo of the rear wheel opening, is that a patch you had to do up at the top? I see a faint outline of what looks like a patch panel. Reason I ask is I have one in the almost the exact spot on the same side. Was kind of wondering if that is common problem on these beasts. __________________ -Panelrodder 1953 GMC Panel truck - 'Curly' 1961 Chevy Suburban - 'Larry' - Sold 2005 Harley Sportster - 'Shemp'

09-01-2010, 07:33 PM	#150
CHIZZLER SAVING ONE TRUCK AT A TIME Join Date: Feb 2010 Location: sherwood oregon Posts: 1,141	Re: 53 BURBAN barn find Because they have sliding side windows this is a very common spot for rust.if you look under the window you will see drain tubes that allow the water to go down.i will be using one piece windows to solve this problem.we made the patch panel by using small pieces. __________________ 53-suburban (99% done) 40-pick up (99.9% done) 12-cc lb dually D-max (dd) 61-crew cab D-max "PAY LESS FOR WHAT YOU NEED PAY MORE FOR WHAT YOU WANT" 53 BURBAN BARN FIND:http://67-72chevytrucks.com/vboard/s...d.php?t=404091 1940 PROJECT MOON SHINE:http://67-72chevytrucks.com/vboard/s...d.php?t=551088 1961 CREW MAX: http://67-72chevytrucks.com/vboard/s....php?p=6957999

Register or Log In To remove these advertisements.