1969 SuperBurb build-up (Bagged and Blown!) - Page 39 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

smbrouss70 · 07-18-2010, 10:53 PM

I like to put a Trans. Temp sender in the line with one of these... http://www.summitracing.com/parts/ATM-2287/

That way you don't have to unhook it everytime you change the filter and fluid.

jmedero · 07-18-2010, 11:05 PM

I say red with a white stripe like the truck. Why not.

**67cheby** · 07-19-2010, 09:35 AM

i say paint them red and have whoever made you that scrolling badge make a scrolled piece to go all the way down the center of the valve covers....its just money and it would look killer

eagleuh1 · 07-19-2010, 04:14 PM

Your engine should look like that after 20k also. Without the exhaust crossover and hot intake baking the oil. Mine looked pretty clean when I had it open at 20K. Does your shifter get into all gears and also is the column adapter made by Lokar or your custom design?

**Hart_Rod** · 07-19-2010, 06:11 PM

Quote:

Originally Posted by VA72C10

Man, you know how to test a man's willpower from coveting.

, Be strong!

Quote:

Originally Posted by smbrouss70

I like to put a Trans. Temp sender in the line with one of these... http://www.summitracing.com/parts/ATM-2287/

That way you don't have to unhook it everytime you change the filter and fluid.

Thanks for the link. I was wanting to use the factory lines but it looks like I may have to do something different.

Quote:

Originally Posted by jmedero

I say red with a white stripe like the truck. Why not.

Don't you think I have enough red and white already???

Quote:

Originally Posted by 67cheby

i say paint them red and have whoever made you that scrolling badge make a scrolled piece to go all the way down the center of the valve covers....its just money and it would look killer

That would probably break the bank.....

.

Quote:

Originally Posted by eagleuh1

Your engine should look like that after 20k also. Without the exhaust crossover and hot intake baking the oil. Mine looked pretty clean when I had it open at 20K. Does your shifter get into all gears and also is the column adapter made by Lokar or your custom design?

Totally agree. Shifter goes into all gears. I will still need to do some fine tuning after I put everything together to stay. Are you talking about the shifter arm bolted to the bottom of the column? If so, that's the Flaming river builds their columns.

kvn1011 · 07-19-2010, 06:41 PM

1st opinion would be black Powdercoating/or paint (glossy)

2nd opinion would be chrome plating or chrome Powdercoating
Awesome job your in the home stretch now!

kvn1011 · 07-19-2010, 06:43 PM

Doublepost

mac72 · 07-20-2010, 08:10 AM

Rob
Just do them glossy red like glocks http://67-72chevytrucks.com/vboard/s...d.php?t=412159
That relly looks sweet . Mac

**Hart_Rod** · 07-23-2010, 11:13 AM

Quote:

Originally Posted by kvn1011

1st opinion would be black Powdercoating/or paint (glossy)

2nd opinion would be chrome plating or chrome Powdercoating
Awesome job your in the home stretch now!

Quote:

Originally Posted by mac72

Rob
Just do them glossy red like glocks http://67-72chevytrucks.com/vboard/s...d.php?t=412159
That relly looks sweet . Mac

Thanks guys. I'm still debating. I'll probably shoot one of each color and see which one I like the best,

...

R/

**Hart_Rod** · 07-25-2010, 12:26 AM

Accomplishments today:

Drilled and tapped oil port to install oil pressure sending unit.
Painted one of the valve covers red (not sure if I like it yet).
Mounted the fuse for the air bag compressor.
And I finally started on the wiring......... what a mess....

.

FRENCHBLUE72 · 07-25-2010, 12:50 AM

idk about that red valve cover maybe it will grow on me but not diggin it as of right now? It just looks outta place?

mcbassin · 07-25-2010, 12:58 AM

Looks like some great progress!

jmedero · 07-25-2010, 01:31 AM

Wow all that and you found time to look at my mess....
I like the red, looks good.

mac72 · 07-25-2010, 10:32 AM

I'm diggin' the red cover,it just needs the coils laid on it to mute it down a little. Mac

eagleuh1 · 07-25-2010, 10:54 AM

I like the red. Just be careful of how many of the liquid refreshments you have while working on the wiring, or it will be a fried mess. LOL. Do you have the part number for the oil pressure cover with the the knob like your using. My Chevy dealer keeps ordering me the plain covers. Thanks. Looking good.

VA72C10 · 07-25-2010, 06:34 PM

Nice progress. I think the red will be good once you have the coil packs on it to break it up...

jbclassix · 07-25-2010, 07:29 PM

since your SC is cast finnished, your valve covers should be cast finnished too. More red, or no red. The lone red valve covers just scream corny.

**Thealien** · 07-25-2010, 07:30 PM

Quote:

Originally Posted by VA72C10

Nice progress. I think the red will be good once you have the coil packs on it to break it up...

Thats what I was thinking also.

**Hart_Rod** · 07-25-2010, 08:42 PM

Quote:

Originally Posted by FRENCHBLUE72

idk about that red valve cover maybe it will grow on me but not diggin it as of right now? It just looks outta place?

I thought the same thing. It looks better with the coil packs back on it.

Quote:

Originally Posted by mcbassin

Looks like some great progress!

Thanks! Any progress on those SB center caps?

Quote:

Originally Posted by jmedero

Wow all that and you found time to look at my mess....
I like the red, looks good.

Anytime Bro!

Quote:

Originally Posted by mac72

I'm diggin' the red cover,it just needs the coils laid on it to mute it down a little. Mac

You're wish is my command! What do ya think?

Quote:

Originally Posted by eagleuh1

I like the red. Just be careful of how many of the liquid refreshments you have while working on the wiring, or it will be a fried mess. LOL. Do you have the part number for the oil pressure cover with the the knob like your using. My Chevy dealer keeps ordering me the plain covers. Thanks. Looking good.

, I didn't think anybody saw that. I think you need to be drunk or crazy to jump into the middle of this wiring mess,

. I don't have a part number, but I know mine came off of a truck pan. I have an extra one if you can't find one local. Let me know.

Quote:

Originally Posted by VA72C10

Nice progress. I think the red will be good once you have the coil packs on it to break it up...

Take a look and tell me what you think.

Quote:

Originally Posted by jbclassix

since your SC is cast finnished, your valve covers should be cast finnished too. More red, or no red. The lone red valve covers just scream corny.

OUCH!!!

I see what you're saying, though. Since they're pretty easy to take off, I'll probably wait until everything is together to see how it looks before I change them again.

Quote:

Originally Posted by Thealien

Thats what I was thinking also.

Tough crowd,

.

dan468 · 07-25-2010, 08:48 PM

I like em!!!

VA72C10 · 07-25-2010, 08:54 PM

I think it looks good. Plus, the headers are similar color to the blower so it will break it up just enough while tying it together with the burb.

kvn1011 · 07-25-2010, 09:30 PM

i agree!! the coil does break it up just enough!! lookin good!!

jbclassix · 07-25-2010, 10:54 PM

maybe paint the fuel rails red too, add a red pinstriping design to the SC snout, black wires (red might not match hues). don't worry, my opinion cant be all that important, I have been told by my smarter half that my black door panels dont match my burb!

mac72 · 07-25-2010, 11:08 PM

Looks really good man, I'd leave em

63chevyll · 07-25-2010, 11:19 PM

i have the same Lokar shifter kit, but im having trouble on my wagon, the rod is too short.

How do you like it?

07-18-2010, 10:53 PM	#951
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,781	Re: 1969 SuperBurb build-up (Bagged and Blown!) I like to put a Trans. Temp sender in the line with one of these... http://www.summitracing.com/parts/ATM-2287/ That way you don't have to unhook it everytime you change the filter and fluid. __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

07-18-2010, 11:05 PM	#952
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 1969 SuperBurb build-up (Bagged and Blown!) I say red with a white stripe like the truck. Why not. __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

07-19-2010, 09:35 AM	#953
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 1969 SuperBurb build-up (Bagged and Blown!) i say paint them red and have whoever made you that scrolling badge make a scrolled piece to go all the way down the center of the valve covers....its just money and it would look killer __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

07-19-2010, 04:14 PM	#954
eagleuh1 Registered User Join Date: Jul 2009 Location: Russellville, Arkansas Posts: 1,699	Re: 1969 SuperBurb build-up (Bagged and Blown!) Your engine should look like that after 20k also. Without the exhaust crossover and hot intake baking the oil. Mine looked pretty clean when I had it open at 20K. Does your shifter get into all gears and also is the column adapter made by Lokar or your custom design?

07-19-2010, 06:41 PM	#956
kvn1011 Kvn1011 Join Date: May 2009 Location: kankakee il Posts: 560	Re: 1969 SuperBurb build-up (Bagged and Blown!) 1st opinion would be black Powdercoating/or paint (glossy) 2nd opinion would be chrome plating or chrome Powdercoating Awesome job your in the home stretch now!

07-19-2010, 06:43 PM	#957
kvn1011 Kvn1011 Join Date: May 2009 Location: kankakee il Posts: 560	Re: 1969 SuperBurb build-up (Bagged and Blown!) Doublepost Last edited by kvn1011; 07-19-2010 at 06:45 PM.

07-20-2010, 08:10 AM	#958
mac72 Registered User Join Date: Dec 2008 Location: port charlotte,florida Posts: 384	Re: 1969 SuperBurb build-up (Bagged and Blown!) Rob Just do them glossy red like glocks http://67-72chevytrucks.com/vboard/s...d.php?t=412159 That relly looks sweet . Mac

07-25-2010, 12:26 AM	#960
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: 1969 SuperBurb build-up (Bagged and Blown!) Accomplishments today: Drilled and tapped oil port to install oil pressure sending unit. Painted one of the valve covers red (not sure if I like it yet). Mounted the fuse for the air bag compressor. And I finally started on the wiring......... what a mess..... Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

07-25-2010, 12:50 AM	#961
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: 1969 SuperBurb build-up (Bagged and Blown!) idk about that red valve cover maybe it will grow on me but not diggin it as of right now? It just looks outta place? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-25-2010, 12:58 AM	#962
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 1969 SuperBurb build-up (Bagged and Blown!) Looks like some great progress! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

07-25-2010, 01:31 AM	#963
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 1969 SuperBurb build-up (Bagged and Blown!) Wow all that and you found time to look at my mess.... I like the red, looks good. __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

07-25-2010, 10:32 AM	#964
mac72 Registered User Join Date: Dec 2008 Location: port charlotte,florida Posts: 384	Re: 1969 SuperBurb build-up (Bagged and Blown!) I'm diggin' the red cover,it just needs the coils laid on it to mute it down a little. Mac

07-25-2010, 10:54 AM	#965
eagleuh1 Registered User Join Date: Jul 2009 Location: Russellville, Arkansas Posts: 1,699	Re: 1969 SuperBurb build-up (Bagged and Blown!) I like the red. Just be careful of how many of the liquid refreshments you have while working on the wiring, or it will be a fried mess. LOL. Do you have the part number for the oil pressure cover with the the knob like your using. My Chevy dealer keeps ordering me the plain covers. Thanks. Looking good.

07-25-2010, 06:34 PM	#966
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 1969 SuperBurb build-up (Bagged and Blown!) Nice progress. I think the red will be good once you have the coil packs on it to break it up... __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-25-2010, 07:29 PM	#967
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: 1969 SuperBurb build-up (Bagged and Blown!) since your SC is cast finnished, your valve covers should be cast finnished too. More red, or no red. The lone red valve covers just scream corny.



Register or Log In To remove these advertisements.

07-25-2010, 08:48 PM	#970
dan468 Registered User Join Date: Nov 2006 Location: Sun City, Arizona Posts: 430	Re: 1969 SuperBurb build-up (Bagged and Blown!) I like em!!! __________________ 68 C-10 Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=414699

07-25-2010, 08:54 PM	#971
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 1969 SuperBurb build-up (Bagged and Blown!) I think it looks good. Plus, the headers are similar color to the blower so it will break it up just enough while tying it together with the burb. __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-25-2010, 09:30 PM	#972
kvn1011 Kvn1011 Join Date: May 2009 Location: kankakee il Posts: 560	Re: 1969 SuperBurb build-up (Bagged and Blown!) i agree!! the coil does break it up just enough!! lookin good!!

07-25-2010, 10:54 PM	#973
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: 1969 SuperBurb build-up (Bagged and Blown!) maybe paint the fuel rails red too, add a red pinstriping design to the SC snout, black wires (red might not match hues). don't worry, my opinion cant be all that important, I have been told by my smarter half that my black door panels dont match my burb! __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

07-25-2010, 11:08 PM	#974
mac72 Registered User Join Date: Dec 2008 Location: port charlotte,florida Posts: 384	Re: 1969 SuperBurb build-up (Bagged and Blown!) Looks really good man, I'd leave em

07-25-2010, 11:19 PM	#975
63chevyll gets board easy....... Join Date: Mar 2009 Location: Colorado Springs Posts: 717	Re: 1969 SuperBurb build-up (Bagged and Blown!) i have the same Lokar shifter kit, but im having trouble on my wagon, the rod is too short. How do you like it?

Register or Log In To remove these advertisements.