|
08-22-2010, 09:48 PM
|
#1 |
|
Addicted to Rust
 
Join Date: Dec 2009
Location: Abbeville SC
Posts: 1,030
|
Had to Notch it
I had to notch the frame on the crew to get the AC compressor in. Either the 3/4 ton frame difference is throwing me off, or the big block shells are different. The mounts that I am using are the same as the drawings in the mount thread. I was going to bend up the frame upper flange to about 45 degrees but that didn't work so well so I cut it out and made a new plate and welded it in. I also found a crack in the frame where the PO trimmed it for a header tube. I ground a v and welded it up. Sorry for the poor quality pics. I left the memory card for the camera at home and had to use my cell.
        
__________________
Current trucks: (48 GMC100 320 inliner) Gone (48 Suburban in pieces) Sold 87 GMC CCSB 5.3 4l60E Daily Driver ECTA National record holder XO/PP We never really grow up, we just learn how to act in public. |
|
|
|
08-22-2010, 11:00 PM
|
#2 |
|
Truck and auto performance nut
Join Date: Feb 2007
Location: McKinney,Texas
Posts: 3,848
|
Re: Had to Notch it
too small for my old eyes!
__________________
Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken |
|
|
|
|
08-22-2010, 11:10 PM
|
#3 | |
|
Registered User
Join Date: Aug 2008
Location: Ledyard, CT
Posts: 119
|
Re: Had to Notch it
Quote:
__________________
Ken B  60 Chevy Apache 2019 Chevy Silverado Z71 Why buy something when you can build it for twice the price..  Just because something can be done doesn't mean it should be done... |
|
|
|
|
|
08-22-2010, 11:21 PM
|
#4 |
|
Truck and auto performance nut
Join Date: Feb 2007
Location: McKinney,Texas
Posts: 3,848
|
Re: Had to Notch it
LMAO!!! I've tried that like a dozen times and it never worked....but then someone mentions it...and it works!
__________________
Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
