Question...Front tire rubbing...What Size? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**70cst** · 06-06-2003, 08:08 AM

Ok...I got the new Lunati Cam installed and the cam is what I've been looking for. Now I think I have my front tires (P275x60x15's) rubbing on the inside fender wells. I have them on 8" rally rims. What size do I need to go down to so my tires do not rub? I have a 1981 front end on my 70cst so I doi have a quicker steering box and I believe a shorter turning radius. As always your help is appreciated.
PS...Yes I know one solution is not to turn to short but in my old age I forget. HEHEHE
Also Remember...Blessed are those who go around in circles for they shall be called the big wheels!!
70cst

70 longbed · 06-06-2003, 01:07 PM

70cst,

Do not have the answer, but do have a couple of questions.

Is your front end dropped? Is it wider because you used a later model front end? I have the same size tires and wheels, but have not gotten the front clip back on since I lowered the truck. Would like to know if this is something that I will need to address real soon.

72chevyLWB · 06-06-2003, 01:36 PM

I ran a 3" drop up front with 275/60/15's with a 15X8 wheel and never once rubbed. Ralley's have a 5" backspace, I had aluminum wheels with a 4" bs. Try a 245/60/15 , that is another very common tire to run up front.

**70cst** · 06-06-2003, 02:21 PM

OK...I see where it is rubbing. It is rubbing on the inside front lower control arms. I have a 2 1/2"/ 4" drop on a 1981 front end. It's going to take smaller tires on front so likely I will go with the 245's on the front. It might be possible that since the 81 front end has a tighter turning radius this is why I'm having rubbing problems? As always your feedback is appreciated.

06-06-2003, 08:08 AM	#1
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Question...Front tire rubbing...What Size? Ok...I got the new Lunati Cam installed and the cam is what I've been looking for. Now I think I have my front tires (P275x60x15's) rubbing on the inside fender wells. I have them on 8" rally rims. What size do I need to go down to so my tires do not rub? I have a 1981 front end on my 70cst so I doi have a quicker steering box and I believe a shorter turning radius. As always your help is appreciated. PS...Yes I know one solution is not to turn to short but in my old age I forget. HEHEHE Also Remember...Blessed are those who go around in circles for they shall be called the big wheels!! 70cst

06-06-2003, 01:07 PM	#2
70 longbed Senior Member Join Date: Oct 2002 Location: Sierra Vista, AZ Posts: 490	70cst, Do not have the answer, but do have a couple of questions. Is your front end dropped? Is it wider because you used a later model front end? I have the same size tires and wheels, but have not gotten the front clip back on since I lowered the truck. Would like to know if this is something that I will need to address real soon. __________________ Keith 70 CST longbed in progress. Hoping to get it back on the road soon.

06-06-2003, 01:36 PM	#3
72chevyLWB Got 20's???? Join Date: Oct 2001 Location: Aberdeen SD Posts: 1,451	I ran a 3" drop up front with 275/60/15's with a 15X8 wheel and never once rubbed. Ralley's have a 5" backspace, I had aluminum wheels with a 4" bs. Try a 245/60/15 , that is another very common tire to run up front. __________________ 99 Silverado Ex-Cab 2wd, Bagged&WhippleCharged 02 Sierra Ex-Cab 4wd 2500 HD The 72 went down the road.

06-06-2003, 02:21 PM	#4
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	OK...I see where it is rubbing. It is rubbing on the inside front lower control arms. I have a 2 1/2"/ 4" drop on a 1981 front end. It's going to take smaller tires on front so likely I will go with the 245's on the front. It might be possible that since the 81 front end has a tighter turning radius this is why I'm having rubbing problems? As always your feedback is appreciated.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.