63-72 LSx Cooling fan setup what ya got? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Clyde65** · 09-15-2010, 04:40 PM

I am currently running an aluminum radiator with dual electric fans, doe sthe mechanical fan keep the engine cooler or? do you have a stock shroud?

Ackattack · 09-15-2010, 05:10 PM

I have dual electric fans off an LS1-F-body. Driving down the highway my temps are ~170 deg.

You can adjust what temps the fans come on via the ECM if you have it set up that way. On my corvette it was very effective at maintaining the temps <200 while at the drag strip.

**Clyde65** · 09-15-2010, 05:23 PM

The reason I ask is because when I stop or am real slow with traffic, the temp goes to about 210+. that is without the AC on. when I am moving temp stays at or about 185-195. So I wanted to know what everyone else is doing, also I dont have my shroud on either, just the two 12" fans, one on all the time, the other with AC on.

**TR65** · 09-15-2010, 09:05 PM

Clyde,

I am running a 6.0 L LS2 (390 HP), 190 thermostat. I am running twin electric fans. The engine runs 190-193. The radiator cools so well that the fans never come on unless I just sit and idle for 5 min. or so (that is in high 90's South Carolina weather). Then one fan comes on for a minute, drops the temp 10 deg and stops. The fans are shrouded with pass throughs if they are not running.

No air conditioning but the install is beginning.

http://67-72chevytrucks.com/vboard/s...d.php?t=420322

tk-mpl · 09-15-2010, 09:08 PM

I got a 16" Hayden electric fan that is controled by the PCM. It seems to cut in and out at an idle. Haven't had a chance to drive it yet...

**LEEVON** · 09-15-2010, 10:08 PM

Quote:

Originally Posted by Clyde65

The reason I ask is because when I stop or am real slow with traffic, the temp goes to about 210+. that is without the AC on. when I am moving temp stays at or about 185-195. So I wanted to know what everyone else is doing, also I dont have my shroud on either, just the two 12" fans, one on all the time, the other with AC on.

That seems about right, long as it maintains 210 and doesn't creep up.

Shon · 09-16-2010, 08:41 AM

I am using LS1 Alum intake and dual fans from F-body. I have one fan programmed to come on at 210 and go off at 200 (I think been a while since i looked) and the other one is to come on at 215 I think, it never comes on. I do not have an 'shrouding', I have it just like it is from the F-body.

Driving is 194* (stock thermo) and when I get in slow/stopped traffic it creeps up to 210 and then that fan brings it back down. I was shocked it actually worked that well.

If you run a mechanical fan I think a shroud is needed, on all of the other swaps we have been involved in the shroud is a must, if we move to an electric fan and it will move enough air it will keep it cool. Sometimes with the Rockcrawling Jeeps we stick to the mechanical fan b/c of the slow speeds and beating the motors take, seems to work better and gives us more room to put a HUGE trans cooler up front which will have its own fan.

NOTE: stock these motors are set to run in the 200-210 range all the time so that is normal.

**Clyde65** · 09-16-2010, 10:38 AM

TR65, you and I have the same radiator and the same fans I guess.

Shon, I dont have a PCM that has the fans in it, at least I dont think I do, it is from a 2002 truck. My #1 fan is set to turn on around 190 but most usually it stays on, the other fan turns on with the AC.

Shon · 09-16-2010, 10:41 AM

Quote:

Originally Posted by Clyde65

Shon, I dont have a PCM that has the fans in it, at least I dont think I do, it is from a 2002 truck. My #1 fan is set to turn on around 190 but most usually it stays on, the other fan turns on with the AC.

All of them have the ability to control fans, just have to tell it to in the PCM.
What tells your fans currently to run if they are not controlled by the PCM?

CamaroChris · 08-03-2011, 07:23 PM

Hey Shon, what pins in the pcm do you connect relays to to control the high and low fans? I'm also using the pcm to control the a/c.
Posted via Mobile Device

Shon · 08-03-2011, 07:45 PM

u have to get the PCM pin outs for the year you are using and put pins in there.

OKGMC4 · 08-04-2011, 06:29 PM

Try this site...TONS of info on here on these and I found my pinout location in there somewhere...

http://www.lt1swap.com/wiringharness.htm

09-15-2010, 05:10 PM	#2
Ackattack Senior Member Join Date: Aug 2002 Location: Valley Center KS Posts: 3,524	Re: 63-72 LSx Cooling fan setup what ya got? I have dual electric fans off an LS1-F-body. Driving down the highway my temps are ~170 deg. You can adjust what temps the fans come on via the ECM if you have it set up that way. On my corvette it was very effective at maintaining the temps <200 while at the drag strip. __________________ Project Bruiser: 68 Pro-Touring C-10 5.3L / 4L60E Project Ironhide: 97 GMC Crew Cab 4x4 Cummins SOLD: '69 GMC 1/2T SWB TBI'd: Project No Buck Assembly Manual Index Sign up Thread!!! Factory Service Manual Index

09-15-2010, 05:23 PM	#3
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: 63-72 LSx Cooling fan setup what ya got? The reason I ask is because when I stop or am real slow with traffic, the temp goes to about 210+. that is without the AC on. when I am moving temp stays at or about 185-195. So I wanted to know what everyone else is doing, also I dont have my shroud on either, just the two 12" fans, one on all the time, the other with AC on. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

09-15-2010, 09:05 PM	#4
TR65 Senior Member Join Date: Nov 2007 Location: Greenville, SC Posts: 873	Re: 63-72 LSx Cooling fan setup what ya got? Clyde, I am running a 6.0 L LS2 (390 HP), 190 thermostat. I am running twin electric fans. The engine runs 190-193. The radiator cools so well that the fans never come on unless I just sit and idle for 5 min. or so (that is in high 90's South Carolina weather). Then one fan comes on for a minute, drops the temp 10 deg and stops. The fans are shrouded with pass throughs if they are not running. No air conditioning but the install is beginning. http://67-72chevytrucks.com/vboard/s...d.php?t=420322 __________________ 1965 C10 SWB Fleet Two owner LS2 Swap Thread http://67-72chevytrucks.com/vboard/s...d.php?t=413880

09-15-2010, 09:08 PM	#5
tk-mpl Registered User Join Date: Jan 2008 Location: Lacombe, Alberta Posts: 353	Re: 63-72 LSx Cooling fan setup what ya got? I got a 16" Hayden electric fan that is controled by the PCM. It seems to cut in and out at an idle. Haven't had a chance to drive it yet... __________________ 1968 short box stepside. 2007 5.3L 4L60, tuned w/EFI Live 2005 Silverado bucket seats. Dominator 2600's all around. Porterbuilt tubular control arms. Magnaflow 3" dual exhaust.

09-16-2010, 08:41 AM	#7
Shon Registered User Join Date: Sep 2005 Location: sc Posts: 1,203	Re: 63-72 LSx Cooling fan setup what ya got? I am using LS1 Alum intake and dual fans from F-body. I have one fan programmed to come on at 210 and go off at 200 (I think been a while since i looked) and the other one is to come on at 215 I think, it never comes on. I do not have an 'shrouding', I have it just like it is from the F-body. Driving is 194* (stock thermo) and when I get in slow/stopped traffic it creeps up to 210 and then that fan brings it back down. I was shocked it actually worked that well. If you run a mechanical fan I think a shroud is needed, on all of the other swaps we have been involved in the shroud is a must, if we move to an electric fan and it will move enough air it will keep it cool. Sometimes with the Rockcrawling Jeeps we stick to the mechanical fan b/c of the slow speeds and beating the motors take, seems to work better and gives us more room to put a HUGE trans cooler up front which will have its own fan. NOTE: stock these motors are set to run in the 200-210 range all the time so that is normal. __________________ 71 Cheyenne C10 LWB cam'd 6.0/T56 Swap Last edited by Shon; 09-16-2010 at 08:42 AM.

09-15-2010, 04:40 PM	#1
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	63-72 LSx Cooling fan setup what ya got? I am currently running an aluminum radiator with dual electric fans, doe sthe mechanical fan keep the engine cooler or? do you have a stock shroud? __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!* Last edited by Clyde65; 09-15-2010 at 04:40 PM.

09-16-2010, 10:38 AM	#8
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: 63-72 LSx Cooling fan setup what ya got? TR65, you and I have the same radiator and the same fans I guess. Shon, I dont have a PCM that has the fans in it, at least I dont think I do, it is from a 2002 truck. My #1 fan is set to turn on around 190 but most usually it stays on, the other fan turns on with the AC. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

08-03-2011, 07:23 PM	#10
CamaroChris Registered User Join Date: Mar 2011 Location: Midvale, Utah Posts: 220	Re: 63-72 LSx Cooling fan setup what ya got? Hey Shon, what pins in the pcm do you connect relays to to control the high and low fans? I'm also using the pcm to control the a/c. Posted via Mobile Device __________________ I LIKE TRUCKS 1986 GMC Suburban Build Build link 1982 Chevy SWB 2wd Scottsdale, Build Link Sold 1987 Jimmy Build, Project Cheap A$$ Build Link

08-03-2011, 07:45 PM	#11
Shon Registered User Join Date: Sep 2005 Location: sc Posts: 1,203	Re: 63-72 LSx Cooling fan setup what ya got? u have to get the PCM pin outs for the year you are using and put pins in there. __________________ 71 Cheyenne C10 LWB cam'd 6.0/T56 Swap

08-04-2011, 06:29 PM	#12
OKGMC4 Registered User Join Date: Oct 2009 Location: Broken Arrow, OK Posts: 1,245	Re: 63-72 LSx Cooling fan setup what ya got? Try this site...TONS of info on here on these and I found my pinout location in there somewhere... http://www.lt1swap.com/wiringharness.htm __________________ 56 GMC BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=368649 69 long bed Chevy turned 67 gmc jimmy roadster: https://67-72chevytrucks.com/vboard/...d.php?t=851167



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.