will headers for a K10 fit a C10? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigjimzlll · 06-08-2003, 03:23 PM

I was given a set of headman hedders for a K10..part number 69230. they have a little better clearance for my angle plugs..anyone ever use K10 headers on a C10?

72MARIO · 06-08-2003, 03:51 PM

I think that they will tuck up in the frame rails un like the 2wd headders that sit below the frame rails. They should fit. I think....

lukecp · 06-08-2003, 05:28 PM

I'm pretty sure heddman truck headers fit any chevy P/U, 2wd or 4wd, as long as its SBC powered from 67-87. Might want to check your Jeg's catalog to make sure.

bigjimzlll · 06-08-2003, 10:48 PM

ttt

Dean · 06-09-2003, 07:55 AM

I installed a set of headers from a C20 on a K20 so they most likely will work. They were a brand called JR whatever that is....

Mike C · 06-09-2003, 08:34 AM

Depends on the header, but most likely they will not. Unless you have the 2 wheel drive V8 mounted in the 6 cylinder postion. But it really does depend on the header. A GOOD header, meaning one that was designed for a 67-72 whether automatic or manual that fits without modifying the OEM clutch linkage most likely will NOT fit, but a header that fits the 73 and up K series probably will.

tom hand · 06-09-2003, 08:36 AM

You should have no problems with an automatic...if it is a stick you may run into interference with the z-bar

kaarazy · 06-09-2003, 01:57 PM

I used 2wd Dynomax headers on my K20 and just used the threaded rod from the Z-bar to clutch fork from a 2wd and bent it around the header tube. 20,000 miles and no problems.

06-08-2003, 03:23 PM	#1
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	will headers for a K10 fit a C10? I was given a set of headman hedders for a K10..part number 69230. they have a little better clearance for my angle plugs..anyone ever use K10 headers on a C10? __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA

06-08-2003, 03:51 PM	#2
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,051	I think that they will tuck up in the frame rails un like the 2wd headders that sit below the frame rails. They should fit. I think.... __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

06-08-2003, 05:28 PM	#3
lukecp Formerly yellow72custom Join Date: May 2001 Location: Austin, TX Posts: 7,531	I'm pretty sure heddman truck headers fit any chevy P/U, 2wd or 4wd, as long as its SBC powered from 67-87. Might want to check your Jeg's catalog to make sure. __________________ '72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg

06-08-2003, 10:48 PM	#4
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	ttt __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA

06-09-2003, 08:34 AM	#6
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,727	Depends on the header, but most likely they will not. Unless you have the 2 wheel drive V8 mounted in the 6 cylinder postion. But it really does depend on the header. A GOOD header, meaning one that was designed for a 67-72 whether automatic or manual that fits without modifying the OEM clutch linkage most likely will NOT fit, but a header that fits the 73 and up K series probably will. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

06-09-2003, 07:55 AM	#5
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	I installed a set of headers from a C20 on a K20 so they most likely will work. They were a brand called JR whatever that is....

06-09-2003, 08:36 AM	#7
tom hand CCRider Join Date: Feb 2000 Location: Olive Branch,MS,USA Posts: 2,232	You should have no problems with an automatic...if it is a stick you may run into interference with the z-bar __________________ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS

06-09-2003, 01:57 PM	#8
kaarazy Registered User Join Date: Oct 2001 Location: Oakfield, WI Posts: 108	headers I used 2wd Dynomax headers on my K20 and just used the threaded rod from the Z-bar to clutch fork from a 2wd and bent it around the header tube. 20,000 miles and no problems. __________________ 1972 K/20 355 c.i.d. sleeper "Circus Wagon"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.