What did you get done 9/19/10 edition - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**old Rusty C10** · 09-19-2010, 07:39 PM

I didnt do anything truck related. My block was hit thursday with a tornado and since then ive been helping with the clean up.We had alot of trees down in both front and rear yards and the street was blocked until i cleared it out.. what kind of chainsaw do i use? NONE i used a cheap harbor freight sawzall for it all...and Lowes blades
Pics from the newspaper..

How about you all??

menace121978 · 09-19-2010, 08:01 PM

click it!

3r!c84 · 09-19-2010, 08:11 PM

started pulling the motor out of truck

*nbpro* · 09-19-2010, 08:14 PM

Reprimed the bed of the truck. Reworked the DIY door panels. Cleaned up the engine bay some more. Found out the alternator isn't working right. Other than that, was a pretty lazy weekend lol.

S10Fan · 09-19-2010, 08:18 PM

The Heap did me proud Saturday, won "Best Old School" at a show in Va Beach.

Spent today doing yard work and walking past my trophy (4' 7"). LOL.

*nbpro* · 09-19-2010, 08:27 PM

Congrats Bryan. I love the truck. Hopefully you'll win many more

S10Fan · 09-19-2010, 08:40 PM

Quote:

Originally Posted by nbpro

Congrats Bryan. I love the truck. Hopefully you'll win many more

Thanks!

68 TT · 09-19-2010, 08:44 PM

Scored a driveshaft out of a 77 G10 short wheel base van that was the right length for my 12-bolt / 4L60E / NP208 combo in my modified 74 K10 chassis.

No trip to the driveshaft shop or $$$ conversion U-joints needed, woo hoo!

Scored a Camaro tach with the 80 psi oil pressure gauge in it and the matching 115 mph optical VSS speedo too. Good by 85 mph speedo.

STOCKISH · 09-19-2010, 08:58 PM

Went to the Pick-N-Pull with my lil man. Had a blast. I scored an entire Suburban interior with perfect grey door panels and trim pieces. Front buckets and rear seats also. All for $150. I will go pull it all next weekend when I get out there by myself. Also got the truck all wired up, burb cluster installed, etc. Just need to order wheels and tires now!

79gmcclassic · 09-19-2010, 09:00 PM

i brought my baby to a show and didnt get anything a stupid ford beat me :[

mongoose · 09-19-2010, 09:06 PM

it's been raining out all weekend so not much done to the truck, I did manage to make summit a bit richer, redoing all my brake lines and upgrading to braided stainless lines instead of the factory rubber..

THE "10" SILVERADO · 09-19-2010, 09:06 PM

I fixed what I thought was a bad headlight and found out it's my wiring that makes the headlight dim and I spent two hours trying to find and get the screw clips back into place to put the bezel on for nothing....the joys of restoring trucks!

81ratrodc10 · 09-19-2010, 09:38 PM

spent all day saturday at a car show saw some nice stuff only one other square there then today put 130 miles on the bike

81ratrodc10 · 09-19-2010, 09:40 PM

some more

**PRattenbury** · 09-19-2010, 09:43 PM

Went to the scrap yard Saturday to drop off some scrap I had filling up my garage. Found some parts for my truck while there, so that was good. Put the rear roll pan on today. Put on the exhaust tips. Replaced the heater fan motor. It's getting there, little by little. Someday it'll be a truck I won't be ashamed of.

Acrophobia · 09-19-2010, 09:57 PM

Installed my new starter and replaced the liner on the welder. Now I can get to work on the rollpan.

keniniowa · 09-19-2010, 10:07 PM

Pulled the cab off my snowplow truck. Had an idea, but thought better of it...

Instant tree house

3r!c84 · 09-19-2010, 10:17 PM

haha ^

flamingbig10 · 09-19-2010, 10:33 PM

Saturday went to a swap meet at the ball park, picked up a few tools I needed for work, then went to harbor freight for a sand blaster got the 40lb capacity one. I was able to blast a dollar bill size before the drier fell apart.

Justins76 · 09-19-2010, 10:53 PM

New battery tray.

slugish · 09-19-2010, 11:07 PM

Quote:

Originally Posted by S10Fan

Thanks!

Very well deserved Braian!Glad the judges can recognize a true talent

S10Fan · 09-20-2010, 05:33 AM

Quote:

Originally Posted by slugish

Very well deserved Braian!Glad the judges can recognize a true talent

I have to tell ya, that was the strangest car show I've ever been to. The parking lot of a Mexican Restaurant/Bar was the location. There were so many cars in the show you could hardly walk around them. Every inch of the parking lot was used. Me and a couple parked next to me considered leaving but there was no way out. The show promoter announced over the PA for everyone to enter the restaurant for the awards presentation. We were met by what looked like most any NFL teams offensive line packing 9mms and everyone was patted down. Once inside we had to show ID and pay a $5.00 cover charge. I refused to pay the $5.00 and turned around to leave. Apparently most everyone felt the same way I did about the cover charge and the promoter was getting an ear full. All the sudden another PA announcement claimed the bar wasn't big enough for everyone so the presentation was moved back outside.

Fortunately the "Old School" class was one of the first ones called, I got the H E double hockey sticks out of there, quick! I checked my mirror all the way home. LOL.

BIG KRIS · 09-20-2010, 05:37 AM

Spent haf the day with my dad at the speed shop buying a 1000 dollars worth of goodies for his fresh out the body shop 85 square

D13 · 09-20-2010, 06:10 AM

Saturday, went to daughter's cross country meet, she cut her time by 1/3 from last year!
Sunday, drove 150 miles to the family farm show a guy my S10, he's picking it up Tuesday. That will let me get to all my stuff stored behind it so I can bring it down to my barn. Pulled the freezer full of 455 Buick parts out of the family garage. Dragged it and some farm equipment home.

Ran the tractor and brush hog for about 2 hours. Should have worn sun block.....

**N2TRUX** · 09-20-2010, 08:49 AM

I worked on call this weekend, so I didn't get near as much done on my E3 install as I wanted to. I did enjoy a small victory late Sunday evening as I finally got the system completely wired and was able to power it up for the first time.

The celebration was short though. I soon discovered I had no pwer to my compressor. After a lot of research I decided to rip the power wire out and start over. That's when I found the turn on relay from the original system that was hidden under the fender liner.

It does have a really cool display though.

09-19-2010, 07:39 PM	#1
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,281	What did you get done 9/19/10 edition I didnt do anything truck related. My block was hit thursday with a tornado and since then ive been helping with the clean up.We had alot of trees down in both front and rear yards and the street was blocked until i cleared it out.. what kind of chainsaw do i use? NONE i used a cheap harbor freight sawzall for it all...and Lowes blades Pics from the newspaper.. How about you all?? Attached Images __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

09-19-2010, 08:01 PM	#2
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: What did you get done 9/19/10 edition click it! __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

09-19-2010, 08:11 PM	#3
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: What did you get done 9/19/10 edition started pulling the motor out of truck __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

09-19-2010, 08:14 PM	#4
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: What did you get done 9/19/10 edition Reprimed the bed of the truck. Reworked the DIY door panels. Cleaned up the engine bay some more. Found out the alternator isn't working right. Other than that, was a pretty lazy weekend lol.

09-19-2010, 08:18 PM	#5
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,640	Re: What did you get done 9/19/10 edition The Heap did me proud Saturday, won "Best Old School" at a show in Va Beach. Spent today doing yard work and walking past my trophy (4' 7"). LOL. Attached Images __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.

09-19-2010, 08:27 PM	#6
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: What did you get done 9/19/10 edition Congrats Bryan. I love the truck. Hopefully you'll win many more

09-19-2010, 08:44 PM	#8
68 TT Still plays with trucks Join Date: Jul 2009 Location: Spokane, WA Posts: 3,556	Re: What did you get done 9/19/10 edition Scored a driveshaft out of a 77 G10 short wheel base van that was the right length for my 12-bolt / 4L60E / NP208 combo in my modified 74 K10 chassis. No trip to the driveshaft shop or $$$ conversion U-joints needed, woo hoo! Scored a Camaro tach with the 80 psi oil pressure gauge in it and the matching 115 mph optical VSS speedo too. Good by 85 mph speedo. Attached Images __________________ miSSed opportunity - ground up creation of an AWD 1994 454 SS that never was http://67-72chevytrucks.com/vboard/s...d.php?t=795577 69 C10 shortbed stepside 400 small block - built like what a super sport truck could have been 69 K20 lwb TBI 350 4L60E NP208 14-bolt Dana-44 w/disc 68 Camaro SS / RS 500hp 439 inch roller cam big block 4L80E 79 Malibu TPI 350 4L60 w/ Z28 steering & sway bars

09-19-2010, 08:58 PM	#9
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: What did you get done 9/19/10 edition Went to the Pick-N-Pull with my lil man. Had a blast. I scored an entire Suburban interior with perfect grey door panels and trim pieces. Front buckets and rear seats also. All for $150. I will go pull it all next weekend when I get out there by myself. Also got the truck all wired up, burb cluster installed, etc. Just need to order wheels and tires now! __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

09-19-2010, 09:00 PM	#10
79gmcclassic Registered User Join Date: Jun 2010 Location: Green bay, Wisconsin Posts: 593	Re: What did you get done 9/19/10 edition i brought my baby to a show and didnt get anything a stupid ford beat me :[ __________________ 1979 GMC Sierra Classic Freshly lowered 5 inches

09-19-2010, 09:06 PM	#11
mongoose Registered User Join Date: Feb 2009 Location: slurrey, bc. Posts: 1,134	Re: What did you get done 9/19/10 edition it's been raining out all weekend so not much done to the truck, I did manage to make summit a bit richer, redoing all my brake lines and upgrading to braided stainless lines instead of the factory rubber.. __________________ -'73 c/10 - Low with Go - will be complete... probably never. -'90 2wd Blazer - well... soon enough anyways. -'84 SWB - the daily gas guzzler.

09-19-2010, 09:06 PM	#12
THE "10" SILVERADO Registered User Join Date: Sep 2010 Location: Marble Falls, TX Posts: 1,575	Re: What did you get done 9/19/10 edition I fixed what I thought was a bad headlight and found out it's my wiring that makes the headlight dim and I spent two hours trying to find and get the screw clips back into place to put the bezel on for nothing....the joys of restoring trucks! __________________ Michael Re-starting the neglected '77...http://67-72chevytrucks.com/vboard/s...=425464&page=9

09-19-2010, 09:38 PM	#13
81ratrodc10 house of chevy's Join Date: May 2010 Location: New milford, CT Posts: 583	Re: What did you get done 9/19/10 edition spent all day saturday at a car show saw some nice stuff only one other square there then today put 130 miles on the bike Attached Images __________________ 1987 m1028 cucv d30 2001 chevy s10 2000 honda shadow sabre 1100 "it's going to be an interesting ride home"

09-19-2010, 09:40 PM	#14
81ratrodc10 house of chevy's Join Date: May 2010 Location: New milford, CT Posts: 583	Re: What did you get done 9/19/10 edition some more Attached Images __________________ 1987 m1028 cucv d30 2001 chevy s10 2000 honda shadow sabre 1100 "it's going to be an interesting ride home"

09-19-2010, 09:43 PM	#15
PRattenbury Senior Member Join Date: Feb 2010 Location: Maumelle, AR Posts: 478	Re: What did you get done 9/19/10 edition Went to the scrap yard Saturday to drop off some scrap I had filling up my garage. Found some parts for my truck while there, so that was good. Put the rear roll pan on today. Put on the exhaust tips. Replaced the heater fan motor. It's getting there, little by little. Someday it'll be a truck I won't be ashamed of.

09-19-2010, 09:57 PM	#16
Acrophobia Registered User Join Date: Jul 2010 Location: New Port Richey, Fl Posts: 92	Re: What did you get done 9/19/10 edition Installed my new starter and replaced the liner on the welder. Now I can get to work on the rollpan.



Register or Log In To remove these advertisements.

09-19-2010, 10:07 PM	#17
keniniowa Registered User Join Date: Dec 2009 Location: Vinton, Iowa Posts: 8	Re: What did you get done 9/19/10 edition Pulled the cab off my snowplow truck. Had an idea, but thought better of it... Instant tree house Last edited by keniniowa; 09-19-2010 at 10:08 PM.

09-19-2010, 10:17 PM	#18
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: What did you get done 9/19/10 edition haha ^ __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

09-19-2010, 10:33 PM	#19
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: What did you get done 9/19/10 edition Saturday went to a swap meet at the ball park, picked up a few tools I needed for work, then went to harbor freight for a sand blaster got the 40lb capacity one. I was able to blast a dollar bill size before the drier fell apart. __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

09-19-2010, 10:53 PM	#20
Justins76 OutOfMyMind & I'llNeverKnowWhy Join Date: Apr 2004 Location: Another world, some other time Posts: 672	Re: What did you get done 9/19/10 edition New battery tray. __________________ -Justin-Out of my mind and I'll never know why 1976 Chevrolet Silverado C10 350 4bbl / TH350 Big10 longbed 1986 Pontiac Firebird T-Top 5.0L TPI 700R4 WS6 1992 Pontiac Firebird T-Top 5.0L TBI 700R4 My cardomain page I don't like to save, it's more fun to spend!!

09-20-2010, 05:37 AM	#23
BIG KRIS Registered User Join Date: May 2009 Location: romeoville,il Posts: 509	Re: What did you get done 9/19/10 edition Spent haf the day with my dad at the speed shop buying a 1000 dollars worth of goodies for his fresh out the body shop 85 square __________________ Flowershop Hip Hop & Street Rods Dropmember 83 Custom Deluxe Almond on Almond 85 Silverado White on Red/Now Chevy LeMans Blue Rendering in Truckin magazine vol 36 no. 11,2010

09-20-2010, 06:10 AM	#24
D13 Registered User Join Date: Feb 2007 Location: Memphis MI Posts: 1,851	Re: What did you get done 9/19/10 edition Saturday, went to daughter's cross country meet, she cut her time by 1/3 from last year! Sunday, drove 150 miles to the family farm show a guy my S10, he's picking it up Tuesday. That will let me get to all my stuff stored behind it so I can bring it down to my barn. Pulled the freezer full of 455 Buick parts out of the family garage. Dragged it and some farm equipment home. Ran the tractor and brush hog for about 2 hours. Should have worn sun block..... __________________ 1987 2 ton 1982 250/TH350 beater in progress Dad's 1981 3/4 L6 3 on tree posi and no options, awaiting restoration or scrapping Plus a mess o' tractors

09-20-2010, 08:49 AM	#25
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: What did you get done 9/19/10 edition I worked on call this weekend, so I didn't get near as much done on my E3 install as I wanted to. I did enjoy a small victory late Sunday evening as I finally got the system completely wired and was able to power it up for the first time. The celebration was short though. I soon discovered I had no pwer to my compressor. After a lot of research I decided to rip the power wire out and start over. That's when I found the turn on relay from the original system that was hidden under the fender liner. It does have a really cool display though. Attached Images __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

Register or Log In To remove these advertisements.