MA Parts N parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GASWAGON · 09-23-2010, 04:13 PM

I'm starting to clear out some space, and thought I would see if anyone could use this stuff. All prices are plus shipping unless stated otherwise. Please respond in the thread and ask any questions. Paypal is prefered. Thanks J

1. Doug's small block headers. These are the nicest headers.They don't leak like the cheapo depot headers. They fit fantastic. They will fit auto or standard. They will not fit a truck with the cast iron bell and built in mounts. ceramic coated, inside and out. 3/8 flanges. No dents they do have some scratches.
replacement cost is almost $600.00. $300 shipped in the lower 48 ( SOLD)

2. Aluminum high flow water pump and billet pulleys. Long style pump that has less than 5K for miles. No issues, clean chrome, billet single groove pulleys. The pump is a flowkooler. Water pump was $140 new and the pulleys where $70.
$100 shipped lower 48 (SOLD)

GASWAGON · 09-23-2010, 04:22 PM

Clean set of 67-72 hood hinges and springs. $30

Driver quality 67-68 grill mouldings, a few dings, $30 pair

New napa small block engine mounts and trans mount. $30 shipped

Small block a/c compressor brackets, one is NOS. I believe they are complete.

$60 shipped

GASWAGON · 09-23-2010, 04:27 PM

A/C brackets

73-87 big block mounts. They where in a 72 I parted. You need to drill a couple of holes. $ 60 shipped

Clean blue sun visors. I think they are aftermarket. $35 shipped

Patsfan34 · 09-23-2010, 04:48 PM

I'd like to put myself first in line for the water pump and pulley. Would like to do a little research first. Could you give me the model # for the water pump? Thanks, Neil

VA72C10 · 09-23-2010, 05:41 PM

i'll take the trim rings...can you give me a price shipped to 23112 please? thanks

gastrader35 · 09-23-2010, 08:49 PM

i would like to be 2nd inline for the pump and pulleys

gastrader35 · 09-23-2010, 08:51 PM

would you have the part # for the headers. wondering if they would fit a 72 4x4

GobbleStalker · 09-23-2010, 09:08 PM

How do I know if I need a long pump or not? I have a 72 with 350?

ksbrktracer · 09-23-2010, 09:12 PM

Your 72 came with a short water pump if it is still stock , If you going to convert it to long water pump you would have to change all of the pulleys, brackets , move alternator to pass side, lengthen wiring etc.....Lots of work.

GASWAGON · 09-23-2010, 09:37 PM

Quote:

Originally Posted by Patsfan34

I'd like to put myself first in line for the water pump and pulley. Would like to do a little research first. Could you give me the model # for the water pump? Thanks, Neil

The part # is 1888p

GASWAGON · 09-23-2010, 09:38 PM

Quote:

Originally Posted by VA72C10

i'll take the trim rings...can you give me a price shipped to 23112 please? thanks

I will measure them and get the shipping amount. Thanks J

GASWAGON · 09-23-2010, 09:44 PM

Quote:

Originally Posted by gastrader35

would you have the part # for the headers. wondering if they would fit a 72 4x4

The part # is d371y. According to there web site, These will NOT fit your truck. They are for 2wd only. Sorry.

GASWAGON · 09-23-2010, 09:45 PM

Quote:

Originally Posted by GobbleStalker

How do I know if I need a long pump or not? I have a 72 with 350?

A stock 72 has a long water pump. If you post a picture I can tell you what you have. Thanks J

GASWAGON · 09-23-2010, 09:47 PM

Quote:

Originally Posted by ksbrktracer

Your 72 came with a short water pump if it is still stock , If you going to convert it to long water pump you would have to change all of the pulleys, brackets , move alternator to pass side, lengthen wiring etc.....Lots of work.

You are incorrect.

GASWAGON · 09-23-2010, 09:48 PM

Quote:

Originally Posted by gastrader35

i would like to be 2nd inline for the pump and pulleys

If Pats fan passes your next in line. thanks J

gastrader35 · 09-23-2010, 10:23 PM

i will be waiting.thanks

Patsfan34 · 09-23-2010, 10:33 PM

Gaswagon I will be dropping a 350 Long block crate motor in my truck and would think this would be a nice addition. Where abouts in MA are you? I'm in CT 06804 but my dad and bro live in Swansea, MA 02777. Maybe I or one of them could meet you to save me the shipping. If it's a pain then shipping would be to a business 06615.

Thanks, Neil

gastrader35 · 09-23-2010, 10:51 PM

what is the outlet size on the collectors.

67-C10 · 09-23-2010, 11:52 PM

If you want to do $250 on the headers I can pick them up i'm in Taunton. If i'm not mistaking your up near Worcester? And if Patsfan goes through i could pick up his stuff too and drop in swansea no problem as it's the next town over.

Patsfan34 · 09-24-2010, 07:18 AM

67-c10 that's a very nice gesture. thanks for attempting to hook me up!

GASWAGON · 09-24-2010, 08:19 AM

[QUOTE=67-C10;4206845]If you want to do $250 on the headers I can pick them up i'm in Taunton. If i'm not mistaking your up near Worcester? And if Patsfan goes through i could pick up his stuff too and drop in swansea no problem as it's the next town over.[/QUOTE

I"ll take the $250.That would be great if you can help Patsfan as well. I'm in Sutton, just South of Worcester. I will PM you my contact info. Thanks Jason

67-C10 · 09-24-2010, 11:15 AM

Quote:

Originally Posted by GASWAGON

Quote:

Originally Posted by 67-C10

If you want to do $250 on the headers I can pick them up i'm in Taunton. If i'm not mistaking your up near Worcester? And if Patsfan goes through i could pick up his stuff too and drop in swansea no problem as it's the next town over.

I"ll take the $250.That would be great if you can help Patsfan as well. I'm in Sutton, just South of Worcester. I will PM you my contact info. Thanks Jason

that will be sweet, i'll give u a call when im outta work. nice ride right up 146. if u and patsfan can get stuff squared up i can pick that up too if he wants.
Posted via Mobile Device

GASWAGON · 09-24-2010, 04:44 PM

Headers sold to 67 c-10 pending payment.

GASWAGON · 09-24-2010, 04:54 PM

Quote:

Originally Posted by VA72C10

i'll take the trim rings...can you give me a price shipped to 23112 please? thanks

Took them in a box to the ups store and they said $28.00. Let me know, J

GASWAGON · 09-24-2010, 05:56 PM

More parts!

1.Edelbrock performer intake for a small block chevy. Used and dirty. $50 shipped.
2. set of GM center bolt valve covers off a zz-1 crate engine. $25.00 SHIPPED

09-23-2010, 04:13 PM	#1
GASWAGON AMERICAN IRON ADDICT Join Date: Oct 2007 Location: MA Posts: 299	Parts N parts I'm starting to clear out some space, and thought I would see if anyone could use this stuff. All prices are plus shipping unless stated otherwise. Please respond in the thread and ask any questions. Paypal is prefered. Thanks J 1. Doug's small block headers. These are the nicest headers.They don't leak like the cheapo depot headers. They fit fantastic. They will fit auto or standard. They will not fit a truck with the cast iron bell and built in mounts. ceramic coated, inside and out. 3/8 flanges. No dents they do have some scratches. replacement cost is almost $600.00. $300 shipped in the lower 48 ( SOLD) 2. Aluminum high flow water pump and billet pulleys. Long style pump that has less than 5K for miles. No issues, clean chrome, billet single groove pulleys. The pump is a flowkooler. Water pump was $140 new and the pulleys where $70. $100 shipped lower 48 (SOLD) Last edited by GASWAGON; 05-08-2011 at 04:24 PM.

09-23-2010, 04:22 PM	#2
GASWAGON AMERICAN IRON ADDICT Join Date: Oct 2007 Location: MA Posts: 299	Re: Parts N parts Clean set of 67-72 hood hinges and springs. $30 Driver quality 67-68 grill mouldings, a few dings, $30 pair New napa small block engine mounts and trans mount. $30 shipped Small block a/c compressor brackets, one is NOS. I believe they are complete. $60 shipped Last edited by GASWAGON; 05-08-2011 at 04:24 PM.

09-23-2010, 04:27 PM	#3
GASWAGON AMERICAN IRON ADDICT Join Date: Oct 2007 Location: MA Posts: 299	Re: Parts N parts A/C brackets 73-87 big block mounts. They where in a 72 I parted. You need to drill a couple of holes. $ 60 shipped Clean blue sun visors. I think they are aftermarket. $35 shipped Last edited by GASWAGON; 05-08-2011 at 04:24 PM.

09-23-2010, 04:48 PM	#4
Patsfan34 Registered User Join Date: Dec 2008 Location: New England Posts: 661	Re: Parts N parts I'd like to put myself first in line for the water pump and pulley. Would like to do a little research first. Could you give me the model # for the water pump? Thanks, Neil

09-23-2010, 05:41 PM	#5
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Parts N parts i'll take the trim rings...can you give me a price shipped to 23112 please? thanks __________________ Looking for a 67-72 swb or blazer project in or around VA.

09-23-2010, 08:49 PM	#6
gastrader35 HOARDING SPECIALIST Join Date: Sep 2009 Location: SOUTH CHARLESTON OHIO Posts: 124	Re: Parts N parts i would like to be 2nd inline for the pump and pulleys

09-23-2010, 08:51 PM	#7
gastrader35 HOARDING SPECIALIST Join Date: Sep 2009 Location: SOUTH CHARLESTON OHIO Posts: 124	Re: Parts N parts would you have the part # for the headers. wondering if they would fit a 72 4x4

09-23-2010, 09:08 PM	#8
GobbleStalker GobbleStalker Calls Join Date: Aug 2010 Location: Port Hope, Ontario Posts: 653	Re: Parts N parts How do I know if I need a long pump or not? I have a 72 with 350? __________________ 72 Chev Longbox Highlander edition. Med Olive/White/ Med Olive 350 4bbl with 350Turbo trans. Truck currently under construction. Project Cappaccino. Stay Tuned! 1967 Chevy C10, 327, 4.11 posi 3 spd. The Driver Truck! SOLD! 09 GMC Sierra SLT All Terrain pkg. 2014 Jeep Wrangler Sahara unlimited. ( The wifes ride )

09-23-2010, 09:12 PM	#9
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: Parts N parts Your 72 came with a short water pump if it is still stock , If you going to convert it to long water pump you would have to change all of the pulleys, brackets , move alternator to pass side, lengthen wiring etc.....Lots of work.

09-23-2010, 10:23 PM	#16
gastrader35 HOARDING SPECIALIST Join Date: Sep 2009 Location: SOUTH CHARLESTON OHIO Posts: 124	Re: Parts N parts i will be waiting.thanks

09-23-2010, 10:33 PM	#17
Patsfan34 Registered User Join Date: Dec 2008 Location: New England Posts: 661	Re: Parts N parts Gaswagon I will be dropping a 350 Long block crate motor in my truck and would think this would be a nice addition. Where abouts in MA are you? I'm in CT 06804 but my dad and bro live in Swansea, MA 02777. Maybe I or one of them could meet you to save me the shipping. If it's a pain then shipping would be to a business 06615. Thanks, Neil

09-23-2010, 10:51 PM	#18
gastrader35 HOARDING SPECIALIST Join Date: Sep 2009 Location: SOUTH CHARLESTON OHIO Posts: 124	Re: Parts N parts what is the outlet size on the collectors.

09-23-2010, 11:52 PM	#19
67-C10 Registered User Join Date: Jul 2008 Location: Taunton, MA Posts: 224	Re: Parts N parts If you want to do $250 on the headers I can pick them up i'm in Taunton. If i'm not mistaking your up near Worcester? And if Patsfan goes through i could pick up his stuff too and drop in swansea no problem as it's the next town over. __________________ 67 C10 2wd Stepside (to be fleetside), Factory AC truck, Big Back Window, just got a 6.0/6l90e to jam in it now..... Needed: paint and lots of it. and i'm sure lots more misc. parts. Project 67 short step Build Thread 01 Sierra Crew 6.0 2015 Ford F150 Work gave me truck i really wouldn't buy a ford.

09-24-2010, 07:18 AM	#20
Patsfan34 Registered User Join Date: Dec 2008 Location: New England Posts: 661	Re: Parts N parts 67-c10 that's a very nice gesture. thanks for attempting to hook me up!

09-24-2010, 08:19 AM	#21
GASWAGON AMERICAN IRON ADDICT Join Date: Oct 2007 Location: MA Posts: 299	Re: Parts N parts [QUOTE=67-C10;4206845]If you want to do $250 on the headers I can pick them up i'm in Taunton. If i'm not mistaking your up near Worcester? And if Patsfan goes through i could pick up his stuff too and drop in swansea no problem as it's the next town over.[/QUOTE I"ll take the $250.That would be great if you can help Patsfan as well. I'm in Sutton, just South of Worcester. I will PM you my contact info. Thanks Jason



Register or Log In To remove these advertisements.

09-24-2010, 04:44 PM	#23
GASWAGON AMERICAN IRON ADDICT Join Date: Oct 2007 Location: MA Posts: 299	Re: Parts N parts Headers sold to 67 c-10 pending payment.

09-24-2010, 05:56 PM	#25
GASWAGON AMERICAN IRON ADDICT Join Date: Oct 2007 Location: MA Posts: 299	Re: Parts N parts More parts! 1.Edelbrock performer intake for a small block chevy. Used and dirty. $50 shipped. 2. set of GM center bolt valve covers off a zz-1 crate engine. $25.00 SHIPPED Last edited by GASWAGON; 05-08-2011 at 04:24 PM.

Register or Log In To remove these advertisements.