post your 67-72 4x4 - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

6772owner · 09-28-2010, 09:18 AM

Thanks guys, I appreciate the compliments, I cant take much credit for the appearence. I bought the truck mostly the way it sits and I can tell you that the pictures dont tell the entire story.

The truck is not original at all, I am unsure of the engine itself, but it has a Turbo 350 (instead of P/G). The truck has a cowl hood (that doesnt fit worth a damn, the entire front clip needs to be regapped, and the body work wasnt done correctly. The back sides of the rockers were "patched" together, the right rear fender has bubbles/rust showing through, the paint is peeling in several areas.... The truck will need to be redone to get to my standards (to say to least), but its a driver for now and I enjoy it.

I paln on doing a Blazer tank swap, lifting it, 35's, new wood bed floor, etc. Repaint the Torch Red someday....

silvertip67 · 09-28-2010, 06:28 PM

what a beautiful vehicle !even though your remarks reveal that you are a perfectionist...it sure looks like a fun ride...

I am a bit torn myself as to whether or not to paint mine or just keep waxing the original paint...I really love the dark green color from '67...and it does eat up the wax!...my '67 CST also comes from Colorado...so I am blessed w/ a super body for a 43 year old vehicle...

...but I like just riding mine as well...it walks the dog in 4WD...I moved to Virginia (shenendoah)from a 1000 acre ranch in Co...so life here is a bit more tame...but folks here love the shape of the old ride...somehow havingt the original paint and interior does has an interesting effect...the truck only has 67k originall miles...it was a familys camper truick and just rode in summers etc...

I have to fix the rear body mount( the dry rot has caused a little slip)...I am going to put on some air shocks too to get the rear up a little...other than getting some new rubber this fall I am probably just going to leave it alone for the winter...I did get rid if the original split rims...nobody wanted to work on them...

enjoy everyones posts...t

nickp51chevy · 09-29-2010, 12:12 PM

Quote:

Originally Posted by silvertip67

I am a bit torn myself as to whether or not to paint mine or just keep waxing the original paint...I really love the dark green color from '67...and it does eat up the wax!...my '67 CST also comes from Colorado...so I am blessed w/ a super body for a 43 year old vehicle.......t

If it were me I wouldn't paint it. She looks good as she sits; at least in the picture. I wish mine looked like that. The P/O sprayed high build primer all over my truck hiding the great original paint; same color as yours (medium green).

6772owner · 09-29-2010, 01:36 PM

Thanks everyone, I am pretty picky about my vehicles, I'm not really complaining, just stating the facts. I still love driving the truck and feel a lot better about it since I started working on it again. (Swapped valve covers/intake, cleaned up the engine wiring, buffed/waxed the paint, etc)

silvertip67 · 10-02-2010, 05:06 PM

I am still going back and forth about repainting...but thought this proof mark under the hood might be of interest to you all...I was told that it was a " sign off" mark from the person at the paint line in the factory...back in the days when human beings actually had a part in the big picture...

my truck is supposedly a california made early model '67 CST C-20...this truck spent its life in the Colorado high country...now in the shenandoah...

one more reason that I have always loved owning old steel...this is my 4th old chevy...all the best...ted

glimmertwin01 · 10-02-2010, 07:17 PM

sweet! thats the color mines going back to...

68 TT · 10-04-2010, 12:48 PM

Quote:

Originally Posted by glimmertwin01

sweet! thats the color mines going back to...

Same color my 67 was. Wish mine was even close to as nice as yours.

Cdshinne · 10-04-2010, 08:25 PM

Here's a couple pics i took today of my 72 k20. Started with a 72 k20 frame then found a 72 gmc 1500 and set the body on her. Still have a ways to go but I plan on painting it back to the red orange and white and adding a 2 1/2 inch lift!

68 TT · 10-05-2010, 02:08 PM

Quote:

Originally Posted by Cdshinne

Here's a couple pics i took today of my 72 k20. Started with a 72 k20 frame then found a 72 gmc 1500 and set the body on her. Still have a ways to go but I plan on painting it back to the red orange and white and adding a 2 1/2 inch lift!

Great start on building a cool truck.

Can you take a closer pic of the trans tunnel area for me? It would help me a lot in the fab work I am doing on mine.

Cdshinne · 10-05-2010, 09:18 PM

Quote:

Originally Posted by 68 TT

Great start on building a cool truck.

Can you take a closer pic of the trans tunnel area for me? It would help me a lot in the fab work I am doing on mine.

I cant take to much credit for the fab work all i did was cut out that section and ad a high hump tunnel from a 4x4 cab. I have seen the high hump tunnels in the sites classifieds for no more than $40.

68 TT · 10-06-2010, 10:33 AM

Quote:

Originally Posted by Cdshinne

I cant take to much credit for the fab work all i did was cut out that section and ad a high hump tunnel from a 4x4 cab. I have seen the high hump tunnels in the sites classifieds for no more than $40.

Thanks, that helps a lot. I looked locally for quite a while but couldn't find a 67-72 part so I am fitting a newer one to my 67. I would like to get as close to the 67-72 look as I can so a stock carpet set might fit or at least be close.

I have a square body K10 high hump and a square body K5 one too plus the floor section that went around them. The K10 part is pretty close to the length of the stock 67-72 part and the side flanges line up with the 67 floor but the back does not transition down so I will have to fabricate the rear transition area to fit.

jdifazzio · 10-28-2010, 10:40 PM

what dya think about my baby? 8" lift 1 ton axles blown smally soon to have 38.5 swampers?

jdifazzio · 10-28-2010, 10:54 PM

also looking for any info of nv4500 transplant? best price? all necessary changes?

Chevymaniac · 10-30-2010, 04:11 AM

Nice looking truck, what color is it? I'am doing similar mods to my 71 GMC LWB. Make sure to include new pics with the swampers install.

BLAZERMAN · 11-01-2010, 12:39 AM

Quote:

Originally Posted by Cdshinne

I cant take to much credit for the fab work all i did was cut out that section and ad a high hump tunnel from a 4x4 cab. I have seen the high hump tunnels in the sites classifieds for no more than $40.

Actually you dont need a high hump for a 4x4 with an automatic..the stock low hump works great. A 4 speed would need it though.

68 TT · 11-01-2010, 11:49 AM

Quote:

Originally Posted by BLAZERMAN

Actually you dont need a high hump for a 4x4 with an automatic..the stock low hump works great. A 4 speed would need it though.

I agree. I just put a 4L60E and NP208 into my low hump 67 C10 and it cleared with at least an inch in all areas.

I'm only putting the high hump tunnel in there for the easy access and so the NP208 shifter has somewhere to go plus I have the tunnel parts out of the TC donor so why not. I think the NP208 shifter linkage may hit the trans or TC with a low hump. If I had an NP205 or 203 in there it would clear for sure with their different TC shifter design.

71blazerdetroit · 11-01-2010, 07:36 PM

1st post, been lurking for a while. Seen some amazing west coast rides on the forums here. wish i saw more closer to this side of town. mods: 1 tons, 700r4, clocked np241, full cage. custom front and rear bumpers.

Cdshinne · 11-01-2010, 09:35 PM

I did not know that, i cut the low hump out before i tried putting the cab on. I would have cut it out anyway just because i want the truck to look as factory as possible. Good to know though

6772owner · 11-02-2010, 09:25 AM

71blazerdetroit: Blazer is looking good! Awesome wheels btw!

72 tigger · 11-06-2010, 06:25 PM

My 72 daily driver (even in the winter) with a complete 02 Dodge drivetrain under it. The 72 was a total (hard LF hit) out of Texas & the Dodge was a totaled roll over. Built it 7 years ago & it seems to work well.

glimmertwin01 · 11-06-2010, 07:40 PM

wow thats some craftsmanship.... but you need a cummins valve cover... JK

72 tigger · 11-07-2010, 09:26 AM

I agree - do they make a Cummins valve cover? I did get rid of the ram on the steering wheel!

glimmertwin01 · 11-07-2010, 09:39 AM

great job makin everything fit in that truck..... thats a great use for a cummins...
how many hours did all of that take you? did the wheelbase match well?

72 tigger · 11-07-2010, 07:16 PM

It took 5 months to build- working evenings & saturdays. Had to cut 12.5 inches out of the frame to shorten the wheelbase. Thanks for the compliments.

bfay17 · 11-10-2010, 11:56 PM

Heres my 70 3/4 ton 454/sm465/np205

09-28-2010, 09:18 AM	#251
6772owner Gearhead Join Date: Jan 2008 Location: Colorado Posts: 1,193	Re: post your 67-72 4x4 Thanks guys, I appreciate the compliments, I cant take much credit for the appearence. I bought the truck mostly the way it sits and I can tell you that the pictures dont tell the entire story. The truck is not original at all, I am unsure of the engine itself, but it has a Turbo 350 (instead of P/G). The truck has a cowl hood (that doesnt fit worth a damn, the entire front clip needs to be regapped, and the body work wasnt done correctly. The back sides of the rockers were "patched" together, the right rear fender has bubbles/rust showing through, the paint is peeling in several areas.... The truck will need to be redone to get to my standards (to say to least), but its a driver for now and I enjoy it. I paln on doing a Blazer tank swap, lifting it, 35's, new wood bed floor, etc. Repaint the Torch Red someday.... __________________ 2002 Saturn SL2, My D/D 2019 Ford Fusion SE, Ecoboost - Wife's D/D 1993 Camaro Z28, A4, CAI, Cat-Back Exhaust Project C10 (my 72' C10 w/96' LT1, 700R4, bagged F&R, 18's (for now), Short/Fleet) -- SOLD! Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=313644

09-28-2010, 06:28 PM	#252
silvertip67 Registered User Join Date: May 2010 Location: pine colorado Posts: 89	Re: post your 67-72 4x4 what a beautiful vehicle !even though your remarks reveal that you are a perfectionist...it sure looks like a fun ride... I am a bit torn myself as to whether or not to paint mine or just keep waxing the original paint...I really love the dark green color from '67...and it does eat up the wax!...my '67 CST also comes from Colorado...so I am blessed w/ a super body for a 43 year old vehicle... ...but I like just riding mine as well...it walks the dog in 4WD...I moved to Virginia (shenendoah)from a 1000 acre ranch in Co...so life here is a bit more tame...but folks here love the shape of the old ride...somehow havingt the original paint and interior does has an interesting effect...the truck only has 67k originall miles...it was a familys camper truick and just rode in summers etc... I have to fix the rear body mount( the dry rot has caused a little slip)...I am going to put on some air shocks too to get the rear up a little...other than getting some new rubber this fall I am probably just going to leave it alone for the winter...I did get rid if the original split rims...nobody wanted to work on them... enjoy everyones posts...t

09-29-2010, 01:36 PM	#254
6772owner Gearhead Join Date: Jan 2008 Location: Colorado Posts: 1,193	Re: post your 67-72 4x4 Thanks everyone, I am pretty picky about my vehicles, I'm not really complaining, just stating the facts. I still love driving the truck and feel a lot better about it since I started working on it again. (Swapped valve covers/intake, cleaned up the engine wiring, buffed/waxed the paint, etc) __________________ 2002 Saturn SL2, My D/D 2019 Ford Fusion SE, Ecoboost - Wife's D/D 1993 Camaro Z28, A4, CAI, Cat-Back Exhaust Project C10 (my 72' C10 w/96' LT1, 700R4, bagged F&R, 18's (for now), Short/Fleet) -- SOLD! Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=313644 Last edited by 6772owner; 09-29-2010 at 01:57 PM. Reason: text

10-02-2010, 05:06 PM	#255
silvertip67 Registered User Join Date: May 2010 Location: pine colorado Posts: 89	Re: post your 67-72 4x4 I am still going back and forth about repainting...but thought this proof mark under the hood might be of interest to you all...I was told that it was a " sign off" mark from the person at the paint line in the factory...back in the days when human beings actually had a part in the big picture... my truck is supposedly a california made early model '67 CST C-20...this truck spent its life in the Colorado high country...now in the shenandoah... one more reason that I have always loved owning old steel...this is my 4th old chevy...all the best...ted Last edited by silvertip67; 10-02-2010 at 05:08 PM.

10-02-2010, 07:17 PM	#256
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: post your 67-72 4x4 sweet! thats the color mines going back to... __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

10-04-2010, 08:25 PM	#258
Cdshinne Registered User Join Date: May 2009 Location: Kokomo, Indiana Posts: 79	Re: post your 67-72 4x4 Here's a couple pics i took today of my 72 k20. Started with a 72 k20 frame then found a 72 gmc 1500 and set the body on her. Still have a ways to go but I plan on painting it back to the red orange and white and adding a 2 1/2 inch lift! Attached Images __________________ 1972 K20 lwb 2000 Z71 x-cab 1970 ford f100

10-28-2010, 10:40 PM	#262
jdifazzio Registered User Join Date: Nov 2008 Location: genevaillinois Posts: 16	Re: post your 67-72 4x4 what dya think about my baby? 8" lift 1 ton axles blown smally soon to have 38.5 swampers? Attached Images Last edited by jdifazzio; 10-28-2010 at 10:51 PM. Reason: add pic

10-28-2010, 10:54 PM	#263
jdifazzio Registered User Join Date: Nov 2008 Location: genevaillinois Posts: 16	Re: post your 67-72 4x4 also looking for any info of nv4500 transplant? best price? all necessary changes? Last edited by jdifazzio; 10-28-2010 at 10:55 PM. Reason: punctuation

10-30-2010, 04:11 AM	#264
Chevymaniac Registered User Join Date: Feb 2010 Location: Kitimat, British Columbia, Canada Posts: 234	Re: post your 67-72 4x4 Nice looking truck, what color is it? I'am doing similar mods to my 71 GMC LWB. Make sure to include new pics with the swampers install.

11-01-2010, 07:36 PM	#267
71blazerdetroit Registered User Join Date: Oct 2010 Location: detroit, mi Posts: 67	Re: post your 67-72 4x4 1st post, been lurking for a while. Seen some amazing west coast rides on the forums here. wish i saw more closer to this side of town. mods: 1 tons, 700r4, clocked np241, full cage. custom front and rear bumpers. Attached Images Last edited by 71blazerdetroit; 11-01-2010 at 07:37 PM.

11-01-2010, 09:35 PM	#268
Cdshinne Registered User Join Date: May 2009 Location: Kokomo, Indiana Posts: 79	Re: post your 67-72 4x4 I did not know that, i cut the low hump out before i tried putting the cab on. I would have cut it out anyway just because i want the truck to look as factory as possible. Good to know though __________________ 1972 K20 lwb 2000 Z71 x-cab 1970 ford f100

11-02-2010, 09:25 AM	#269
6772owner Gearhead Join Date: Jan 2008 Location: Colorado Posts: 1,193	Re: post your 67-72 4x4 71blazerdetroit: Blazer is looking good! Awesome wheels btw! __________________ 2002 Saturn SL2, My D/D 2019 Ford Fusion SE, Ecoboost - Wife's D/D 1993 Camaro Z28, A4, CAI, Cat-Back Exhaust Project C10 (my 72' C10 w/96' LT1, 700R4, bagged F&R, 18's (for now), Short/Fleet) -- SOLD! Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=313644

11-06-2010, 06:25 PM	#270
72 tigger Registered User Join Date: Apr 2008 Location: Berne IN Posts: 3,254	Re: post your 67-72 4x4 My 72 daily driver (even in the winter) with a complete 02 Dodge drivetrain under it. The 72 was a total (hard LF hit) out of Texas & the Dodge was a totaled roll over. Built it 7 years ago & it seems to work well. Attached Images

11-06-2010, 07:40 PM	#271
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: post your 67-72 4x4 wow thats some craftsmanship.... but you need a cummins valve cover... JK __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

11-07-2010, 09:26 AM	#272
72 tigger Registered User Join Date: Apr 2008 Location: Berne IN Posts: 3,254	Re: post your 67-72 4x4 I agree - do they make a Cummins valve cover? I did get rid of the ram on the steering wheel!



Register or Log In To remove these advertisements.

11-07-2010, 09:39 AM	#273
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: post your 67-72 4x4 great job makin everything fit in that truck..... thats a great use for a cummins... how many hours did all of that take you? did the wheelbase match well? __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

11-07-2010, 07:16 PM	#274
72 tigger Registered User Join Date: Apr 2008 Location: Berne IN Posts: 3,254	Re: post your 67-72 4x4 It took 5 months to build- working evenings & saturdays. Had to cut 12.5 inches out of the frame to shorten the wheelbase. Thanks for the compliments.

11-10-2010, 11:56 PM	#275
bfay17 Young Gun Join Date: Aug 2008 Location: Waupaca, Wi Posts: 192	Re: post your 67-72 4x4 Heres my 70 3/4 ton 454/sm465/np205 Attached Images

Register or Log In To remove these advertisements.