Angle plug head/header question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

evilways · 10-09-2010, 06:35 PM

I am trying to locate a set of Long tube headers that will accommodate the angle plug heads, plus frame clearance. Anyone got a manufacturer part number or even some pics of these type headers. Thanks in advance

**El Jay** · 10-09-2010, 08:39 PM

Check with Stan's Headers. They have just about everything.
Although I don't have angle plug heads, I'm happy with the set (installed by P.O.) on my '69. But I do know they make them for angle plug heads

www.stans-headers.com/gm_headers.htm

Old Yeller 1970 · 10-09-2010, 08:40 PM

My Hooker Competition headers (Part Number 2452) work with my angle plug heads. They even clear my manual trans linkage. Fits all '67-72 Chevy, GMC 1/2, 3/4, 1 Ton PU, Suburbans, Blazers and, Jimmys with 283-400 CID engines. The spark plug boot on cylinder 5 is very tight. It doesn't touch the header pipe but I keep a ceramic sleeve on it just to be safe.

evilways · 10-10-2010, 11:18 AM

Thanks guys

bigsnookmaster · 10-11-2010, 08:35 AM

I run Hooker Super comps with no problem. # 5 is tight, but with a 90 degree boot, no problem.

10-09-2010, 06:35 PM	#1
evilways Registered User Join Date: Mar 2008 Location: Lafayette, IN Posts: 226	Angle plug head/header question I am trying to locate a set of Long tube headers that will accommodate the angle plug heads, plus frame clearance. Anyone got a manufacturer part number or even some pics of these type headers. Thanks in advance __________________ Mark 1967 C/10 stepside lwb daily driver 1968 C/10 fleetside lwb parts truck 1971 Cheyenne Super swb project

10-09-2010, 08:39 PM	#2
El Jay Gone to greener pastures Join Date: May 2007 Location: Gateway to the Delta Posts: 7,354	Re: Angle plug head/header question Check with Stan's Headers. They have just about everything. Although I don't have angle plug heads, I'm happy with the set (installed by P.O.) on my '69. But I do know they make them for angle plug heads www.stans-headers.com/gm_headers.htm __________________ '69 Chevy 1/2 T LWB Stepper: Daily Beater '72 GMC 3/4 T Fleet: Another Daily Beater '72 Plymouth Gran Coupe: ? "Ah women. They make the highs higher and the lows more frequent." Friedrich Nietzsche "Never kick a fresh turd on a hot day." Harry S. Truman GUN CONTROL: Never having to say, "I missed you." Always fire two warning shots into your attacker's chest area before putting a bullet between his eyes. Paraphrased from Louis Awerbuck

10-09-2010, 08:40 PM	#3
Old Yeller 1970 DON'T TREAD ON ME Join Date: May 2005 Location: Crosby County, TX Posts: 989	Re: Angle plug head/header question My Hooker Competition headers (Part Number 2452) work with my angle plug heads. They even clear my manual trans linkage. Fits all '67-72 Chevy, GMC 1/2, 3/4, 1 Ton PU, Suburbans, Blazers and, Jimmys with 283-400 CID engines. The spark plug boot on cylinder 5 is very tight. It doesn't touch the header pipe but I keep a ceramic sleeve on it just to be safe. __________________ Old Yeller Last edited by Old Yeller 1970; 10-09-2010 at 08:41 PM.

10-10-2010, 11:18 AM	#4
evilways Registered User Join Date: Mar 2008 Location: Lafayette, IN Posts: 226	Re: Angle plug head/header question Thanks guys __________________ Mark 1967 C/10 stepside lwb daily driver 1968 C/10 fleetside lwb parts truck 1971 Cheyenne Super swb project

10-11-2010, 08:35 AM	#5
bigsnookmaster Registered User Join Date: Jan 2008 Location: St.Petersburg,Fl Posts: 1,267	Re: Angle plug head/header question I run Hooker Super comps with no problem. # 5 is tight, but with a 90 degree boot, no problem. __________________ greg http://community.webshots.com/user/68406Stepside



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.