TX Stainless Headers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lynnfield · 10-21-2010, 12:41 PM

New stainless headers that never got used. No name brand, SBC, they have 3" collectors and either 1 1/2" or 1 5/8" primaries (see pic). They come in the box with all the gaskets and hardware shown. 160.00 shipped, 48 states only.

New price $140.00 shipped

lynnfield · 10-21-2010, 12:44 PM

More pics

2003 silverado · 10-21-2010, 01:02 PM

put me in line if they fit a 72 blazer

lynnfield · 10-21-2010, 01:19 PM

I bought them for my truck, but I don't see why they wouldn't fit a blazer.

johnechi · 10-21-2010, 02:07 PM

Are these 1 1/2 or 1 5/8 primary tubes?

**PICKMUP** · 10-21-2010, 03:07 PM

They should fit 2WD. You may have to trim the LH motor mount. They probably won't fit 4WD.

2003 silverado · 10-21-2010, 03:10 PM

Ill pass thanks

**ScottH** · 10-21-2010, 04:22 PM

Interested.....what was the original application for? any part #s?

Thanks.
Scott

lynnfield · 10-21-2010, 05:04 PM

They are in a plain generic box. I bought them from a vendor at pate swap meet last year. They are supposed to fit 66-72 chevy trucks.

lynnfield · 10-21-2010, 05:27 PM

I went and looked at the box again and found this number on the side. KTSCSB6672

lynnfield · 10-21-2010, 05:32 PM

Johnechi, It's hard to tell for sure if they are 1 1/2" or 1 5/8", because of the shape of the exhaust port (see the pic).

lynnfield · 10-22-2010, 07:52 AM

^^^

lynnfield · 10-22-2010, 06:10 PM

bump

lynnfield · 10-23-2010, 12:49 PM

Still for sale, $140.00 shipped??

lynnfield · 10-23-2010, 09:16 PM

Ttt

Arad68 · 10-24-2010, 12:50 AM

These headers appear to be Flotech, like these ( http://www.summitracing.com/parts/BI...0FLT/?rtype=10) only stainless

**ScottH** · 10-24-2010, 11:04 AM

If u can do $125 shipped and wait till the end of the week when I get paid I'll take them.

Thanks.
Scott

K2Orion · 10-24-2010, 02:41 PM

I'm interested if the others in line pass. Please PM me If its my turn.

lynnfield · 10-24-2010, 05:22 PM

PM sent to K2Orion

**ScottH** · 10-24-2010, 05:54 PM

Is that a no to my offer?
Pretty sure I was first in line and according to the rules sales are not to be done via PMs.

Thanks.
Scott

lynnfield · 10-24-2010, 07:34 PM

You are first in line if you have $140.00, and can pay me now. I'm not trying to step on any toes, but you are offering me less than my asking price and for me to wait until friday for it, so I don't feel obligated. I feel that if you are willing to put me off til friday, then you are willing to take your chances, and they are still for sale until then. Forum rules also state that the first "I'll take it" gets the part. Again, this is not meant in any way to be rude, but the first I'll take it with the cash, gets the part, per forum rules. Thanks, Greg

**ScottH** · 10-24-2010, 10:25 PM

Greg, sorry if u misunderstood, I was just looking for a yes or no.
It was the best I could do, and considering no one had made any offers up to that point I thought I would see if that would work for u. Similar offers with delayed payments have worked in the past for other members, if it doesn't for u no problem but with no reply I had no way of knowing.

Good luck with the sale.

Scott

lynnfield · 10-26-2010, 01:48 AM

I am giving K2Orion til 2pm 10/26 before I move on.

tanman722001 · 10-26-2010, 08:27 AM

Will these fit a 350 with a 4 speed?

c10crazy · 10-26-2010, 11:53 AM

That is a smoking deal for headers that won't rust! I can't believe somebody hasn't snatched them up!

10-21-2010, 12:41 PM	#1
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Stainless Headers New stainless headers that never got used. No name brand, SBC, they have 3" collectors and either 1 1/2" or 1 5/8" primaries (see pic). They come in the box with all the gaskets and hardware shown. 160.00 shipped, 48 states only. New price $140.00 shipped Attached Images Last edited by lynnfield; 10-23-2010 at 12:50 PM.

10-21-2010, 12:44 PM	#2
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: Stainless Headers More pics Attached Images

10-21-2010, 01:02 PM	#3
2003 silverado Registered User Join Date: Apr 2010 Location: West Chester Pa Posts: 965	Re: Stainless Headers put me in line if they fit a 72 blazer __________________ !972 K5 Blazer,Highlander,A/C a twin to the one I Had 1972 K/5 Blazer CST Highlander 15YR project 2003 Silverado Crew 2500HD (Daily driver) 1997 Ford focus (Beater) 2003 ford Taurus (student) 2014 Ford Fusion HYB (wife) 2003 Jetta ( Student)

10-21-2010, 01:19 PM	#4
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: Stainless Headers I bought them for my truck, but I don't see why they wouldn't fit a blazer.

10-21-2010, 02:07 PM	#5
johnechi Registered User Join Date: Jun 2009 Location: Hesperia, CA Posts: 159	Re: Stainless Headers Are these 1 1/2 or 1 5/8 primary tubes?

10-21-2010, 03:07 PM	#6
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,139	Re: Stainless Headers They should fit 2WD. You may have to trim the LH motor mount. They probably won't fit 4WD.

10-21-2010, 03:10 PM	#7
2003 silverado Registered User Join Date: Apr 2010 Location: West Chester Pa Posts: 965	Re: Stainless Headers Ill pass thanks __________________ !972 K5 Blazer,Highlander,A/C a twin to the one I Had 1972 K/5 Blazer CST Highlander 15YR project 2003 Silverado Crew 2500HD (Daily driver) 1997 Ford focus (Beater) 2003 ford Taurus (student) 2014 Ford Fusion HYB (wife) 2003 Jetta ( Student)

10-21-2010, 04:22 PM	#8
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Stainless Headers Interested.....what was the original application for? any part #s? Thanks. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-21-2010, 05:04 PM	#9
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: Stainless Headers They are in a plain generic box. I bought them from a vendor at pate swap meet last year. They are supposed to fit 66-72 chevy trucks.

10-21-2010, 05:27 PM	#10
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: Stainless Headers I went and looked at the box again and found this number on the side. KTSCSB6672

10-21-2010, 05:32 PM	#11
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: Stainless Headers Johnechi, It's hard to tell for sure if they are 1 1/2" or 1 5/8", because of the shape of the exhaust port (see the pic).

10-22-2010, 07:52 AM	#12
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: Stainless Headers ^^^

10-22-2010, 06:10 PM	#13
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: Stainless Headers bump

10-23-2010, 12:49 PM	#14
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: Stainless Headers Still for sale, $140.00 shipped??

10-23-2010, 09:16 PM	#15
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: Stainless Headers Ttt



Register or Log In To remove these advertisements.

10-24-2010, 12:50 AM	#16
Arad68 Trucks N Tranzams Join Date: Dec 2002 Location: North Las Vegas, Nevada Posts: 816	Re: Stainless Headers These headers appear to be Flotech, like these ( http://www.summitracing.com/parts/BI...0FLT/?rtype=10) only stainless __________________ Don '68 Chevy LB 383 TH400/GV/373 posi '56 Chevy 4WD SWB '64 Chevy short stepside '79 Trans Am 455/TH2004R/12blt/4whldisc 95 Kia (Wifes car) 2002 S-10 extended cab pickup "God punishes small sins immediately"

10-24-2010, 11:04 AM	#17
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Stainless Headers If u can do $125 shipped and wait till the end of the week when I get paid I'll take them. Thanks. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-24-2010, 02:41 PM	#18
K2Orion Registered User Join Date: Jan 2009 Location: St. Louis, MO Posts: 75	Re: Stainless Headers I'm interested if the others in line pass. Please PM me If its my turn.

10-24-2010, 05:22 PM	#19
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: Stainless Headers PM sent to K2Orion

10-24-2010, 05:54 PM	#20
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Stainless Headers Is that a no to my offer? Pretty sure I was first in line and according to the rules sales are not to be done via PMs. Thanks. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon Last edited by ScottH; 10-24-2010 at 05:55 PM.

10-24-2010, 07:34 PM	#21
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: Stainless Headers You are first in line if you have $140.00, and can pay me now. I'm not trying to step on any toes, but you are offering me less than my asking price and for me to wait until friday for it, so I don't feel obligated. I feel that if you are willing to put me off til friday, then you are willing to take your chances, and they are still for sale until then. Forum rules also state that the first "I'll take it" gets the part. Again, this is not meant in any way to be rude, but the first I'll take it with the cash, gets the part, per forum rules. Thanks, Greg Last edited by lynnfield; 10-24-2010 at 07:35 PM.

10-24-2010, 10:25 PM	#22
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Stainless Headers Greg, sorry if u misunderstood, I was just looking for a yes or no. It was the best I could do, and considering no one had made any offers up to that point I thought I would see if that would work for u. Similar offers with delayed payments have worked in the past for other members, if it doesn't for u no problem but with no reply I had no way of knowing. Good luck with the sale. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-26-2010, 01:48 AM	#23
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: Stainless Headers I am giving K2Orion til 2pm 10/26 before I move on.

10-26-2010, 08:27 AM	#24
tanman722001 Registered User Join Date: Oct 2010 Location: Mocksville,NC Posts: 419	Re: Stainless Headers Will these fit a 350 with a 4 speed? __________________ 1991 GMC K2500 4X4 350/auto 1991 Chevy S10 ext cab. 1990 Chevy S10 1993 Chevy S10 Blazer 4dr 4.3 Vortex/Auto

10-26-2010, 11:53 AM	#25
c10crazy Like a Rock! Join Date: May 2002 Location: USA Posts: 1,092	Re: Stainless Headers That is a smoking deal for headers that won't rust! I can't believe somebody hasn't snatched them up! __________________ 69 LWB Runs great - work in progress Mess with me and you mess with the whole trailer park! Last edited by c10crazy; 10-26-2010 at 11:54 AM.

Register or Log In To remove these advertisements.