|
06-14-2003, 03:33 PM
|
#1 |
|
Account Suspended
Join Date: Oct 2002
Location: Elkhart, IN
Posts: 6,399
|
no power to coil
my 86 left me stranded along the side of the road the other day, so i towed it to my grandparents house. i came over here today,to try and figure out what was wrong with it.
i checked for spark the other day when i was stck along the road, so i knew it didnt have any spark. i pulled the power wire for the coil, and touched it with a test light with the key on. no power. i should have 12v when the key is on correct? if i should, where should i start tracing the wires? i dont really have time to chase the problem right now, so i'd like to know a decent place to start. if im not mistaken, the wire goes to the starter solenoid, am i correct there? |
|
|
|
06-14-2003, 04:24 PM
|
#2 |
|
Registered User
Join Date: Feb 2003
Location: michigan
Posts: 121
|
probably a fusable link. there are one or two on the firewall above the breack buster. or it could be your ignition switch.
(did i buthcer that spelling or what) 
|
|
|
|
|
06-14-2003, 05:05 PM
|
#3 |
|
Account Suspended
Join Date: Oct 2002
Location: Elkhart, IN
Posts: 6,399
|
if it were the ignition switch, would it still crank and all of the accessories work? i forgot to mention that everything seems to be fine, except the lack of power to the coil.
|
|
|
|
|
06-14-2003, 06:33 PM
|
#4 |
Join Date: Jan 2003
Location: Modesto, CA
Posts: 1,321
|
yup, that wire basically goes to the BAT terminal on the starter.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
