Oil press. sending unit ques. for a '62 c=10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

C-10cutty · 11-03-2010, 06:03 AM

I'm stumped. The wire from the sending unit is broken and hanging from the engine and I can't seem to figure out where it broke loose from. I've searched the firewall and under the dash and everything looks together and in place. Any help apreciated.

raycow · 11-03-2010, 11:34 PM

If you have the stock warning light, the wire goes to the engine harness firewall connector.
http://rmcavoy.freeshell.org/diagrams/63engine_6.jpg

Ray

C-10cutty · 11-04-2010, 06:21 AM

Quote:

Originally Posted by raycow

If you have the stock warning light, the wire goes to the engine harness firewall connector.
http://rmcavoy.freeshell.org/diagrams/63engine_6.jpg

Ray

Thanks!!

11-03-2010, 06:03 AM	#1
C-10cutty Registered User Join Date: May 2010 Location: Galesburg, Kansas Posts: 174	Oil press. sending unit ques. for a '62 c=10 I'm stumped. The wire from the sending unit is broken and hanging from the engine and I can't seem to figure out where it broke loose from. I've searched the firewall and under the dash and everything looks together and in place. Any help apreciated.

11-03-2010, 11:34 PM	#2
raycow Registered User Join Date: Mar 2003 Location: San Francisco, CA USA Posts: 2,454	Re: Oil press. sending unit ques. for a '62 c=10 If you have the stock warning light, the wire goes to the engine harness firewall connector. http://rmcavoy.freeshell.org/diagrams/63engine_6.jpg Ray __________________ Live more responsibly. Eat lower on the food chain. Eat vegetarians.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.