[PROJECT] Laidout53 Part II - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FnLow69 · 11-09-2010, 11:24 PM

Thanks guys. I hope to hinge the bed floor so i can show the chassis details....

Justin

VA72C10 · 11-09-2010, 11:37 PM

Quote:

Originally Posted by FnLow69

Thanks guys. I hope to hinge the bed floor so i can show the chassis details....

Justin

Looks great...I'd definitely do the hinged floor!

jwalk · 11-11-2010, 02:59 AM

It's coming right along..... Looking good! Are you planing on running wide whites on your 69 also?

FnLow69 · 11-11-2010, 11:40 AM

thanks justin. im not sure yet, i might run 22's.

SCOTI · 11-11-2010, 11:55 AM

Quote:

Originally Posted by FnLow69

Thanks guys. I hope to hinge the bed floor so i can show the chassis details....

Justin

Hinge it like a tonneau cover.

68laydout · 11-11-2010, 06:39 PM

Very nice man. What are you using to cut the curved parts of the rear gussets?

FnLow69 · 11-12-2010, 01:06 AM

Quote:

Originally Posted by SCOTI

Hinge it like a tonneau cover.

Yep, thats how im thinking of doing it.

Quote:

Originally Posted by 68laydout

Very nice man. What are you using to cut the curved parts of the rear gussets?

Thanks, i used a plasma cutter we have at my work. I need to get one there awesome! that and a TIG are on my "need" list....

FnLow69 · 11-15-2010, 01:08 AM

Well made some progress last night and today. Got the frame gussets welded last night, and today i got the motor in place. Had to make the motor mount tabs and the tranny crossmember. Also picked up a new rearend housing for it since the old one is to wide.

Heres the pictures...

Gussets welded (Lots of welding)...

Tranny crossmember i fab'd up...

Motor mount tabs....

Motor in place...

New rearend housing, still needs cleaned up (about 4" narrower then the other one)...

What do you think?

Justin

FnLow69 · 11-21-2010, 10:17 PM

Well Got the housing cleaned up and the leaf spring mounts removed, and got the axle set in place. Had to switch back to my old 3-link wishbone setup since there wasnt enought room for the parrallel 4-bar. So i got both the lowers tacked in.

Heres the pictures...

Lower mounts (nut is welded on the back of the tab)

Cut the gusset out of the upper wishbone because the metal i used for it was pitted. Thinking of chroming the link bars....

Thanks
Justin

FRENCHBLUE72 · 11-21-2010, 10:24 PM

Awesome work justin...

ksbrktracer · 11-21-2010, 10:35 PM

lookin good ..... ! Lots of really nice work ...... ! Is the wish bone gonna be adjustable ?

jwalk · 11-21-2010, 10:55 PM

Justin looks great as always! Awesome work keep it up!

What will the ride height be at? As low as possible.....
Posted via Mobile Device

sams60gmc · 11-21-2010, 10:57 PM

dude nice work.

FnLow69 · 11-21-2010, 11:10 PM

Thanks guys

Quote:

Originally Posted by ksbrktracer

lookin good ..... ! Lots of really nice work ...... ! Is the wish bone gonna be adjustable ?

Nope, pinion angle is 3* down

Quote:

Originally Posted by olskool59delivery

Justin looks great as always! Awesome work keep it up!

What will the ride height be at? As low as possible.....

Ride height is set at 4"

Justin

jbclassix · 11-21-2010, 11:53 PM

awesome progress

**67cheby** · 11-22-2010, 10:15 AM

super clean !!

FnLow69 · 11-22-2010, 09:48 PM

Thanks guys
Posted via Mobile Device

FnLow69 · 12-27-2010, 12:06 AM

Work on the frame a little last weekend and some this weekend, got the driveline hoop crossmember made and installed,still needs some kind of gusset. Also got the upper wishbone installed, front tabs on the wishbone still need gussets. I got the body mounts tacked into place also (frames going to be sandblasted so i didnt worry about cleaning them up).

Heres the Pictures...

What do you think?

Justin

jwalk · 12-27-2010, 12:30 AM

I think it's looking great! Who wouldn't..... I was about to start wondering where you was. LOL. No progress for a month. Geez... Na. Looking good! Can't wait to see this one one the ground!

67chevy1series · 12-27-2010, 02:23 AM

WOW SUBSCRIBED

**67cheby** · 12-27-2010, 10:32 AM

BEAUTIFUL work man you are knocking this one out of the park !!

VA72C10 · 12-27-2010, 10:48 AM

VERY NICE! Shame you had to put those crusty cab mounts on...

rondog4416 · 12-27-2010, 08:12 PM

Looking killer !! Get this done then back on to the c-10 !!! Great work !!

ksbrktracer · 12-27-2010, 08:40 PM

Quote:

Originally Posted by rondog4416

Looking killer !! Get this done then back on to the c-10 !!! Great work !!

I agree ......gotta get this done so you can get back on the chevy.....! Hurry UP......! lol

FnLow69 · 12-27-2010, 11:37 PM

Quote:

Originally Posted by olskool59delivery

I think it's looking great! Who wouldn't..... I was about to start wondering where you was. LOL. No progress for a month. Geez... Na. Looking good! Can't wait to see this one one the ground!

Lol, ive been slacking. Thanks man...

Quote:

Originally Posted by 67chevy1series

WOW SUBSCRIBED

Thanks man...

Quote:

Originally Posted by 67cheby

BEAUTIFUL work man you are knocking this one out of the park !!

Thanks man...

Quote:

Originally Posted by VA72C10

VERY NICE! Shame you had to put those crusty cab mounts on...

Haha, i know, thanks man..

Quote:

Originally Posted by rondog4416

Looking killer !! Get this done then back on to the c-10 !!! Great work !!

Thanks, haha i know soon enough...

Quote:

Originally Posted by ksbrktracer

I agree ......gotta get this done so you can get back on the chevy.....! Hurry UP......! lol

Soon enough ill be back on it...

11-09-2010, 11:24 PM	#51
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: [PROJECT] Laidout53 Part II Thanks guys. I hope to hinge the bed floor so i can show the chassis details.... Justin __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

11-11-2010, 02:59 AM	#53
jwalk What was I thinking? Join Date: Mar 2007 Location: oklahoma Posts: 1,137	Re: [PROJECT] Laidout53 Part II It's coming right along..... Looking good! Are you planing on running wide whites on your 69 also? __________________ Justin '68 C/10 Custom Long wide bed '78 GMC Sierra short wide Project: Second time around...'68 short wide http://67-72chevytrucks.com/vboard/s...d.php?t=423949

11-11-2010, 11:40 AM	#54
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: [PROJECT] Laidout53 Part II thanks justin. im not sure yet, i might run 22's. __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

11-11-2010, 06:39 PM	#56
68laydout Junior Member Join Date: Jun 2006 Location: Frisco Tx Posts: 311	Re: [PROJECT] Laidout53 Part II Very nice man. What are you using to cut the curved parts of the rear gussets?

11-15-2010, 01:08 AM	#58
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: [PROJECT] Laidout53 Part II Well made some progress last night and today. Got the frame gussets welded last night, and today i got the motor in place. Had to make the motor mount tabs and the tranny crossmember. Also picked up a new rearend housing for it since the old one is to wide. Heres the pictures... Gussets welded (Lots of welding)... Tranny crossmember i fab'd up... Motor mount tabs.... Motor in place... New rearend housing, still needs cleaned up (about 4" narrower then the other one)... What do you think? Justin __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

11-21-2010, 10:17 PM	#59
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: [PROJECT] Laidout53 Part II Well Got the housing cleaned up and the leaf spring mounts removed, and got the axle set in place. Had to switch back to my old 3-link wishbone setup since there wasnt enought room for the parrallel 4-bar. So i got both the lowers tacked in. Heres the pictures... Lower mounts (nut is welded on the back of the tab) Cut the gusset out of the upper wishbone because the metal i used for it was pitted. Thinking of chroming the link bars.... Thanks Justin __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

11-21-2010, 10:24 PM	#60
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: [PROJECT] Laidout53 Part II Awesome work justin... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-21-2010, 10:35 PM	#61
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: [PROJECT] Laidout53 Part II lookin good ..... ! Lots of really nice work ...... ! Is the wish bone gonna be adjustable ?

11-21-2010, 10:55 PM	#62
jwalk What was I thinking? Join Date: Mar 2007 Location: oklahoma Posts: 1,137	Re: [PROJECT] Laidout53 Part II Justin looks great as always! Awesome work keep it up! What will the ride height be at? As low as possible..... Posted via Mobile Device __________________ Justin '68 C/10 Custom Long wide bed '78 GMC Sierra short wide Project: Second time around...'68 short wide http://67-72chevytrucks.com/vboard/s...d.php?t=423949

11-21-2010, 10:57 PM	#63
sams60gmc Registered User Join Date: Sep 2008 Location: Vancouver Washington Posts: 726	Re: [PROJECT] Laidout53 Part II dude nice work. __________________ 1960 GMC short fleet, full frame build... http://67-72chevytrucks.com/vboard/s...d.php?t=329718

11-21-2010, 11:53 PM	#65
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: [PROJECT] Laidout53 Part II awesome progress __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

11-22-2010, 10:15 AM	#66
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: [PROJECT] Laidout53 Part II super clean !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-22-2010, 09:48 PM	#67
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: [PROJECT] Laidout53 Part II Thanks guys Posted via Mobile Device __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

12-27-2010, 12:06 AM	#68
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: [PROJECT] Laidout53 Part II Work on the frame a little last weekend and some this weekend, got the driveline hoop crossmember made and installed,still needs some kind of gusset. Also got the upper wishbone installed, front tabs on the wishbone still need gussets. I got the body mounts tacked into place also (frames going to be sandblasted so i didnt worry about cleaning them up). Heres the Pictures... What do you think? Justin __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

12-27-2010, 12:30 AM	#69
jwalk What was I thinking? Join Date: Mar 2007 Location: oklahoma Posts: 1,137	Re: [PROJECT] Laidout53 Part II I think it's looking great! Who wouldn't..... I was about to start wondering where you was. LOL. No progress for a month. Geez... Na. Looking good! Can't wait to see this one one the ground! __________________ Justin '68 C/10 Custom Long wide bed '78 GMC Sierra short wide Project: Second time around...'68 short wide http://67-72chevytrucks.com/vboard/s...d.php?t=423949



Register or Log In To remove these advertisements.

12-27-2010, 02:23 AM	#70
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: [PROJECT] Laidout53 Part II WOW SUBSCRIBED

12-27-2010, 10:32 AM	#71
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: [PROJECT] Laidout53 Part II BEAUTIFUL work man you are knocking this one out of the park !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-27-2010, 10:48 AM	#72
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: [PROJECT] Laidout53 Part II VERY NICE! Shame you had to put those crusty cab mounts on... __________________ Looking for a 67-72 swb or blazer project in or around VA.

12-27-2010, 08:12 PM	#73
rondog4416 Registered User Join Date: May 2010 Location: puyallup wa Posts: 233	Re: [PROJECT] Laidout53 Part II Looking killer !! Get this done then back on to the c-10 !!! Great work !!

Register or Log In To remove these advertisements.