How about some pics of 67-72 Trucks - Page 152 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

thunder71 · 11-13-2010, 11:43 PM

72 tigger · 11-14-2010, 08:48 AM

My 72, sitting on a 02 Dodge chassis(the 72 was a total from TX & the Dodge was a roll over total).Built it in 03 & has worked really well.

ky_savage · 11-14-2010, 09:02 AM

Quote:

Originally Posted by 72 tigger

My 72, sitting on a 02 Dodge chassis(the 72 was a total from TX & the Dodge was a roll over total).Built it in 03 & has worked really well.

Thatis one cool truck!!
Posted via Mobile Device

**WIDESIDE72** · 11-14-2010, 12:40 PM

Quote:

Originally Posted by 72 tigger

My 72, sitting on a 02 Dodge chassis(the 72 was a total from TX & the Dodge was a roll over total).Built it in 03 & has worked really well.

I would like more details on this conversion!

**Dieselwrencher** · 11-14-2010, 01:22 PM

72 tigger, very nice job! Do you have a build thread on your truck? Your instrument cluster looks awesome!

**Palf70Step** · 11-14-2010, 02:50 PM

Quote:

Originally Posted by WIDESIDE72

I would like more details on this conversion!

gearys 5600 · 11-14-2010, 04:56 PM

I love the cummins conversion.

72 tigger · 11-14-2010, 07:22 PM

I'm terrible at recording (notes & photos) builds. Basically I took a solid 1/2 ton 2WD that was hit hard in the LF & used that cab & bed. The Dodge was a light roll (frame was straight) with 23,000 miles. I removed the Dodge body, cut off all the body mounts, & removed 12.5 inches from the wheelbase. Then I took a straight Chevy chassis & measured the distance between (& elevation changes)of the body mounts. I then replicated the Chevy mounts on the Dodge chassis. I installed the cab & hooked up (fabricated) everything I could - much easier to work on stuff without any sheetmetal in the way. Then installed the rad support (extreme fabrication) & the dog house. The bed bolted up to the new mounts without much trouble.This project obviously required a lot of fab work but wasn't terrible. I had about 5 months (working evening & saturdays) in it start to finish. Thanks for the nice comments!

thunder71 · 11-14-2010, 08:03 PM

tracyk859 · 11-14-2010, 09:02 PM

Thanks for the post.
Hi guys, Im a newbie. Nice to join this forum.

__________________
Watch Unstoppable Online Free

motomaster99 · 11-14-2010, 09:04 PM

my dads old truck buryed into a telephone pole.

My cousin was driving who is very mentally unstable. He hit the pole at 55mph with no seat belt. Got out of the truck and was fine.

Pushed the pole 12 ft.

I was the first one to the accident and watched it happen in the rear-view of my 71 k10. They drove me home from the hospital in that sonoma when i was born lol.

BigRed76 · 11-14-2010, 09:50 PM

Quote:

Originally Posted by motomaster99

my dads old truck buryed into a telephone pole.

My cousin was driving who is very mentally unstable. He hit the pole at 55mph with no seat belt. Got out of the truck and was fine.

Pushed the pole 12 ft.

I was the first one to the accident and watched it happen in the rear-view of my 71 k10. They drove me home from the hospital in that sonoma when i was born lol.

That sucks about the sonoma...but I love the K10

Mack81 · 11-16-2010, 02:01 PM

It's hard to follow these sweet trucks but here's the '68 I just bought. It will have a project thread started soon since there are a bunch of things I need to do and a bunch I want to do on it.

**Dieselwrencher** · 11-16-2010, 05:47 PM

Nice truck Mack81!

Vintage Windmills · 11-16-2010, 10:41 PM

Here is the 71 C20 i picked up recently. I have wanted a lwb 67-72 since 1995. I have alot of questions for you guys coming up!

eagleuh1 · 11-17-2010, 09:35 AM

Nice looking rig. Looks to be in real good shape for up north.

rsavage · 11-17-2010, 09:41 AM

Welcome. Nice truck. Love the windmill too.

squeaky69 · 11-17-2010, 10:22 AM

Name: chevy.jpg
Views: 12510
Size: 31.0 KB

my new tattoo

cam.man67 · 11-17-2010, 01:18 PM

Took some pics of my truck today:

Tons more in the link in my sig.

**67cheby** · 11-17-2010, 01:20 PM

cool pics

Vintage Windmills · 11-17-2010, 01:34 PM

Quote:

Originally Posted by cam.man67

Took some pics of my truck today:

Tons more in the link in my sig.

Nice truck. It looks almost purple in the earlier pic and then light blue in the later one. Which is it? Also, do you have a 67 as well, as your screen name indicates?

cam.man67 · 11-17-2010, 01:41 PM

Quote:

Originally Posted by Vintage Windmills

Nice truck. It looks almost purple in the earlier pic and then light blue in the later one. Which is it? Also, do you have a 67 as well, as your screen name indicates?

Thanks. It's 1994 GMC Medium Blue Metallic. In different lighting, it looks anything from almost purple to dark blue-green. Really happy with how it turned out.

No, my truck is a '69. My screen name is from my dream car, a '67 Camaro.

tdp67 · 11-17-2010, 03:17 PM

Quote:

Originally Posted by thunder71

Something tells me that "sack" below your grill would not be a good thing!

TonyC66 · 11-17-2010, 09:06 PM

Quote:

Originally Posted by Mack81

It's hard to follow these sweet trucks but here's the '68 I just bought. It will have a project thread started soon since there are a bunch of things I need to do and a bunch I want to do on it.

You sure its not a 67? The fenders and bed look like a 67, but the front trim is for a 68. Interesting..

coggonobrien · 11-17-2010, 11:49 PM

67 and 68's are the same except for side markers and most 67's are a small back window

11-13-2010, 11:43 PM	#3776
thunder71 Registered User Join Date: Dec 2009 Location: Carolina Coast Posts: 582	Re: How about some pics of 67-72 Trucks __________________ _____________________________________ 66 C10 shortbed stepside KEEPER 66 C10 longbed stepside SOLD 69 C10 shortbed stepside SOLD 71 C10 custom deluxe long fleetside SOLD _____________________________________

11-14-2010, 08:48 AM	#3777
72 tigger Registered User Join Date: Apr 2008 Location: Berne IN Posts: 3,254	Re: How about some pics of 67-72 Trucks My 72, sitting on a 02 Dodge chassis(the 72 was a total from TX & the Dodge was a roll over total).Built it in 03 & has worked really well. Attached Images

11-14-2010, 01:22 PM	#3780
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: How about some pics of 67-72 Trucks 72 tigger, very nice job! Do you have a build thread on your truck? Your instrument cluster looks awesome! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-14-2010, 04:56 PM	#3782
gearys 5600 Registered User Join Date: Mar 2010 Location: tulsa,ok Posts: 1,085	Re: How about some pics of 67-72 Trucks I love the cummins conversion. __________________ MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=423629 1969 custom/10 swb--SOLD 1968 swb 50th anniv.--SOLD 1967 camaro ss/rs..LS-6-speed, 16-year long project 1956 chevy nomad 1955 chevy 210 2-dr sedan 1978 el-camino ss 1-owner

11-14-2010, 07:22 PM	#3783
72 tigger Registered User Join Date: Apr 2008 Location: Berne IN Posts: 3,254	Re: How about some pics of 67-72 Trucks I'm terrible at recording (notes & photos) builds. Basically I took a solid 1/2 ton 2WD that was hit hard in the LF & used that cab & bed. The Dodge was a light roll (frame was straight) with 23,000 miles. I removed the Dodge body, cut off all the body mounts, & removed 12.5 inches from the wheelbase. Then I took a straight Chevy chassis & measured the distance between (& elevation changes)of the body mounts. I then replicated the Chevy mounts on the Dodge chassis. I installed the cab & hooked up (fabricated) everything I could - much easier to work on stuff without any sheetmetal in the way. Then installed the rad support (extreme fabrication) & the dog house. The bed bolted up to the new mounts without much trouble.This project obviously required a lot of fab work but wasn't terrible. I had about 5 months (working evening & saturdays) in it start to finish. Thanks for the nice comments!

11-14-2010, 08:03 PM	#3784
thunder71 Registered User Join Date: Dec 2009 Location: Carolina Coast Posts: 582	Re: How about some pics of 67-72 Trucks __________________ _____________________________________ 66 C10 shortbed stepside KEEPER 66 C10 longbed stepside SOLD 69 C10 shortbed stepside SOLD 71 C10 custom deluxe long fleetside SOLD _____________________________________

11-14-2010, 09:02 PM	#3785
tracyk859 Registered User Join Date: Nov 2010 Location: new york Posts: 2	Re: How about some pics of 67-72 Trucks Thanks for the post. Hi guys, Im a newbie. Nice to join this forum. __________________ Watch Unstoppable Online Free

11-14-2010, 09:04 PM	#3786
motomaster99 Registered User Join Date: Sep 2010 Location: Brewer, ME Posts: 23	Re: How about some pics of 67-72 Trucks my dads old truck buryed into a telephone pole. My cousin was driving who is very mentally unstable. He hit the pole at 55mph with no seat belt. Got out of the truck and was fine. Pushed the pole 12 ft. I was the first one to the accident and watched it happen in the rear-view of my 71 k10. They drove me home from the hospital in that sonoma when i was born lol.

11-16-2010, 02:01 PM	#3788
Mack81 Registered User Join Date: Aug 2010 Location: Tennessee Posts: 26	Re: How about some pics of 67-72 Trucks It's hard to follow these sweet trucks but here's the '68 I just bought. It will have a project thread started soon since there are a bunch of things I need to do and a bunch I want to do on it. Attached Images

11-16-2010, 05:47 PM	#3789
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: How about some pics of 67-72 Trucks Nice truck Mack81! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-16-2010, 10:41 PM	#3790
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: How about some pics of 67-72 Trucks Here is the 71 C20 i picked up recently. I have wanted a lwb 67-72 since 1995. I have alot of questions for you guys coming up! Attached Images

11-17-2010, 09:35 AM	#3791
eagleuh1 Registered User Join Date: Jul 2009 Location: Russellville, Arkansas Posts: 1,699	Re: How about some pics of 67-72 Trucks Nice looking rig. Looks to be in real good shape for up north.

11-17-2010, 09:41 AM	#3792
rsavage Registered User Join Date: Aug 2009 Location: Alden NY Posts: 2,705	Re: How about some pics of 67-72 Trucks Welcome. Nice truck. Love the windmill too. __________________ 1961 C1 Corvette 1959 El Camino 350 TPI, 9" 4 w disc 69 Blazer K5 - sold July '20 2021 Durango RT 5.7

11-17-2010, 10:22 AM	#3793
squeaky69 Registered User Join Date: Nov 2006 Location: chuckey,tn. Posts: 49	Re: How about some pics of 67-72 Trucks my new tattoo Last edited by squeaky69; 11-17-2010 at 10:23 AM.

11-17-2010, 01:18 PM	#3794
cam.man67 Registered User Join Date: Jun 2010 Location: Jefferson, MD Posts: 2,397	Re: How about some pics of 67-72 Trucks Took some pics of my truck today: Tons more in the link in my sig. __________________ '68 Dodge Dart 270, 225, 904, 2.76--"Lucy" 1996 Gmc 1500 Z71, 350, 4l60e, 3.73s 1995 Jeep Wrangler Rio Grande 2.5, AX5, 4.10s 1989 Toyota Pickup 22re, auto, 3.73



Register or Log In To remove these advertisements.

11-17-2010, 01:20 PM	#3795
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: How about some pics of 67-72 Trucks cool pics __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-17-2010, 11:49 PM	#3800
coggonobrien Registered User Join Date: Mar 2008 Location: Coggon, IA Posts: 580	Re: How about some pics of 67-72 Trucks 67 and 68's are the same except for side markers and most 67's are a small back window

Register or Log In To remove these advertisements.