Question About Camaro Subframe?

[Fat Mike]

What degree of angle is the subframe suppose to be at on a 59 frame. I read somewhere 7 degrees. Can't the camaro subframe be welded at the same height as the existing frame? What will happen if there is no dive in the camaro subframe?Also, need a measurement from the front body mounts to the centerline of the camaro subframe.

[troy54gmc]

i did mine at the same height as the original frame. i think if you want it to sit lower you can z the frame s where you connect them.

[kaycee]

Hey Troy how much did this drop your ride I am thinking of doing this but don't want it to drop to much.I was planning on doing the sub-frame up under the stock frame and then welding

[troy54gmc]

Hey Kaycee, here is a picture of the truck sitting on 17" stock dodge charger wheels. this is completly bottomed out with stock spindles. i plan on adding drop spindles to get the bumper on the ground. i think with a nice set of spring or bags it should sit at a reasonable level. there are a ton of pictures on here with guys welding on the way you are talking about. hope this helps.

[troy54gmc]

heres a front shot.