AD Truck Project - Page 18 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bjcaldwe · 12-21-2010, 01:09 PM

Looks like I need to make some room out in the shed and bring a motor stand home.

I looked out in the garage, and I did not dream. I did tack the crossmember on lol.

bjcaldwe · 12-22-2010, 04:05 PM

I bolted a fender and the core support on to get an idea where the suspension would set in the fender. The lower arm is sorta on, as well as he spindle. I just set the rotor on to look at it. I would get a pic from farther back but that require tearing down a wall of my garage. lol

With this crossmember the front will set a bit higher. One neat thing about that, is I will not have to cut the inner fender. At most I would just need to fill the hole where the stock steering box would have been.

bjcaldwe · 12-31-2010, 01:32 PM

I have a small parts update. Scott's Hotrods had bags on sale, so I ordered some ss6's after talking to Jon. Slowly but surely... lol.

Next on the buy list are 5 on 4 3/4 pattern rotors from Parr, since it is about 10 minutes away, and I need the cross shaft bolts for the upper control arms.

JohnC · 01-03-2011, 10:44 AM

Sweet!

bjcaldwe · 01-03-2011, 01:24 PM

I really need to post an update with some meat to it.

mcbassin · 01-03-2011, 02:23 PM

Hey man progress is progress!

bjcaldwe · 01-06-2011, 08:12 PM

A few more pieces to the puzzle.

bjcaldwe · 01-06-2011, 08:19 PM

I have been thinking this afternoon and I think I will just use the 5on5 rotors for mock up purposes and so I can hopefully make the front end mobile in the next few months.

scotts62 · 01-07-2011, 12:29 AM

AHH nothing like a late Christmas..

bjcaldwe · 01-07-2011, 12:54 AM

I could not pass up the price. Maybe I can trade a kidney for a 4 link?

JohnC · 01-14-2011, 11:27 AM

Sweet!

mcbassin · 01-14-2011, 12:13 PM

Quote:

Originally Posted by bjcaldwe

I have been thinking this afternoon and I think I will just use the 5on5 rotors for mock up purposes and so I can hopefully make the front end mobile in the next few months.

Hey,
I have some 5X5 rotors for you if you want them. Still have the 305 heads/block if you want them too. Let me know.

bjcaldwe · 01-14-2011, 12:52 PM

I have some 5on5 rotors already. I tried to find a rearend narrow enough to do 5on5 on the back without redrilling but no luck.

Ive got a motor to get from Scott too. I just have no way of unloading it after I get home.

mcbassin · 01-14-2011, 01:08 PM

Quote:

Originally Posted by bjcaldwe

I have some 5on5 rotors already. I tried to find a rearend narrow enough to do 5on5 on the back without redrilling but no luck.

Ive got a motor to get from Scott too. I just have no way of unloading it after I get home.

I have some portable a-frames you could use. It would be a little drive for you to return them. Let me know.

bjcaldwe · 02-04-2011, 09:11 PM

Nothing new to really report on my project. A few weeks ago I did work with some clr, water, and scotch brite and cleaned up some surface rust on the driver side door and on the hood. Since we have had snow lately, here is a pic of my 4 door snow plow.

joe231 · 02-04-2011, 09:45 PM

I was just wondering how your crew was doing in the white stuff.

scotts62 · 02-04-2011, 10:09 PM

Nice!

bjcaldwe · 02-04-2011, 10:53 PM

It has been doing better than many stock height trucks and suv's I have seen.

I just got back from rib crib.

scotts62 · 02-04-2011, 11:15 PM

Quote:

Originally Posted by bjcaldwe

I just got back from rib crib.

bjcaldwe · 02-05-2011, 12:20 AM

Ice, nor snow, nor dark of night keeps me from bbq.

mcbassin · 02-05-2011, 01:03 AM

Quote:

Originally Posted by bjcaldwe

Ice, nor snow, nor dark of night keeps me from bbq.

I bet you were really pushing some snow in your crew. Glad to here you were able to get around though. another inch here at the house this eve.

bjcaldwe · 02-05-2011, 01:16 AM

Yeah, it was pushing quite a bit. Tuesday and Wednesday I worked from home, so I did not have to mess with it.

scotts62 · 02-05-2011, 01:24 AM

Quote:

Originally Posted by bjcaldwe

Ice, nor snow, nor dark of night keeps me from bbq.

nice!

JohnC · 02-07-2011, 04:21 PM

Did you get new wheels on the crew? I didn't remember those being on there.

dougminton · 02-24-2011, 01:34 PM

subscribed

12-21-2010, 01:09 PM	#426
bjcaldwe Registered User Join Date: Aug 2009 Location: OKC, OK Posts: 1,169	Re: AD Truck Project Looks like I need to make some room out in the shed and bring a motor stand home. I looked out in the garage, and I did not dream. I did tack the crossmember on lol. __________________ My AD Truck Build Thread 52 GMC one day laying on the running boards 2004 Chevy Crewcab. 3/5 and notched

12-22-2010, 04:05 PM	#427
bjcaldwe Registered User Join Date: Aug 2009 Location: OKC, OK Posts: 1,169	Re: AD Truck Project I bolted a fender and the core support on to get an idea where the suspension would set in the fender. The lower arm is sorta on, as well as he spindle. I just set the rotor on to look at it. I would get a pic from farther back but that require tearing down a wall of my garage. lol With this crossmember the front will set a bit higher. One neat thing about that, is I will not have to cut the inner fender. At most I would just need to fill the hole where the stock steering box would have been. __________________ My AD Truck Build Thread 52 GMC one day laying on the running boards 2004 Chevy Crewcab. 3/5 and notched

12-31-2010, 01:32 PM	#428
bjcaldwe Registered User Join Date: Aug 2009 Location: OKC, OK Posts: 1,169	Re: AD Truck Project I have a small parts update. Scott's Hotrods had bags on sale, so I ordered some ss6's after talking to Jon. Slowly but surely... lol. Next on the buy list are 5 on 4 3/4 pattern rotors from Parr, since it is about 10 minutes away, and I need the cross shaft bolts for the upper control arms. __________________ My AD Truck Build Thread 52 GMC one day laying on the running boards 2004 Chevy Crewcab. 3/5 and notched

01-03-2011, 10:44 AM	#429
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: AD Truck Project Sweet!

01-03-2011, 01:24 PM	#430
bjcaldwe Registered User Join Date: Aug 2009 Location: OKC, OK Posts: 1,169	Re: AD Truck Project I really need to post an update with some meat to it. __________________ My AD Truck Build Thread 52 GMC one day laying on the running boards 2004 Chevy Crewcab. 3/5 and notched

01-03-2011, 02:23 PM	#431
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: AD Truck Project Hey man progress is progress! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

01-06-2011, 08:12 PM	#432
bjcaldwe Registered User Join Date: Aug 2009 Location: OKC, OK Posts: 1,169	Re: AD Truck Project A few more pieces to the puzzle. __________________ My AD Truck Build Thread 52 GMC one day laying on the running boards 2004 Chevy Crewcab. 3/5 and notched

01-06-2011, 08:19 PM	#433
bjcaldwe Registered User Join Date: Aug 2009 Location: OKC, OK Posts: 1,169	Re: AD Truck Project I have been thinking this afternoon and I think I will just use the 5on5 rotors for mock up purposes and so I can hopefully make the front end mobile in the next few months. __________________ My AD Truck Build Thread 52 GMC one day laying on the running boards 2004 Chevy Crewcab. 3/5 and notched

01-07-2011, 12:29 AM	#434
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: AD Truck Project AHH nothing like a late Christmas.. __________________ Scott 93 crew cab build Project 62

01-07-2011, 12:54 AM	#435
bjcaldwe Registered User Join Date: Aug 2009 Location: OKC, OK Posts: 1,169	Re: AD Truck Project I could not pass up the price. Maybe I can trade a kidney for a 4 link? __________________ My AD Truck Build Thread 52 GMC one day laying on the running boards 2004 Chevy Crewcab. 3/5 and notched

01-14-2011, 11:27 AM	#436
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: AD Truck Project Sweet!

01-14-2011, 12:52 PM	#438
bjcaldwe Registered User Join Date: Aug 2009 Location: OKC, OK Posts: 1,169	Re: AD Truck Project I have some 5on5 rotors already. I tried to find a rearend narrow enough to do 5on5 on the back without redrilling but no luck. Ive got a motor to get from Scott too. I just have no way of unloading it after I get home. __________________ My AD Truck Build Thread 52 GMC one day laying on the running boards 2004 Chevy Crewcab. 3/5 and notched

02-04-2011, 09:11 PM	#440
bjcaldwe Registered User Join Date: Aug 2009 Location: OKC, OK Posts: 1,169	Re: AD Truck Project Nothing new to really report on my project. A few weeks ago I did work with some clr, water, and scotch brite and cleaned up some surface rust on the driver side door and on the hood. Since we have had snow lately, here is a pic of my 4 door snow plow. __________________ My AD Truck Build Thread 52 GMC one day laying on the running boards 2004 Chevy Crewcab. 3/5 and notched

02-04-2011, 09:45 PM	#441
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: AD Truck Project I was just wondering how your crew was doing in the white stuff. __________________ *CHEVY ONLY*

02-04-2011, 10:09 PM	#442
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: AD Truck Project Nice! __________________ Scott 93 crew cab build Project 62



Register or Log In To remove these advertisements.

02-04-2011, 10:53 PM	#443
bjcaldwe Registered User Join Date: Aug 2009 Location: OKC, OK Posts: 1,169	Re: AD Truck Project It has been doing better than many stock height trucks and suv's I have seen. I just got back from rib crib. __________________ My AD Truck Build Thread 52 GMC one day laying on the running boards 2004 Chevy Crewcab. 3/5 and notched

02-05-2011, 12:20 AM	#445
bjcaldwe Registered User Join Date: Aug 2009 Location: OKC, OK Posts: 1,169	Re: AD Truck Project Ice, nor snow, nor dark of night keeps me from bbq. __________________ My AD Truck Build Thread 52 GMC one day laying on the running boards 2004 Chevy Crewcab. 3/5 and notched

02-05-2011, 01:16 AM	#447
bjcaldwe Registered User Join Date: Aug 2009 Location: OKC, OK Posts: 1,169	Re: AD Truck Project Yeah, it was pushing quite a bit. Tuesday and Wednesday I worked from home, so I did not have to mess with it. __________________ My AD Truck Build Thread 52 GMC one day laying on the running boards 2004 Chevy Crewcab. 3/5 and notched

02-07-2011, 04:21 PM	#449
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: AD Truck Project Did you get new wheels on the crew? I didn't remember those being on there.

02-24-2011, 01:34 PM	#450
dougminton Registered User Join Date: Mar 2009 Location: norman okahoma Posts: 269	Re: AD Truck Project subscribed __________________ The TEAL GMC build thread is HERE 1972 GMC SWB 454 oval ports TH400 fastest 1/4 mile time so far 13.05 @ 104 If you think you have too much horsepower you obviously have a traction problem !

Register or Log In To remove these advertisements.