What did you get done 12/26/2010 end of year edition - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**old Rusty C10** · 12-26-2010, 02:15 PM

Ive been tied up with lots of personal issues the last week. I am still contemplating buying a new shortbed truck that is in better shape than the longbed i have but other than that there has been nothing truck related.
I hope all had a good holiday season
How about you all did you do anything?

eightyfive · 12-26-2010, 02:35 PM

Got some rocker panels for christmas so now i just have to finish insulating my garage and then i can get to welding those bad boys in place.

ghettoluxury · 12-26-2010, 05:04 PM

Got a Tach dash, a tailgate band all the exterior and interior trim today for $50, then traded the rest of a wrecked Hyundai i bought for a 73 GMC Serria Grande front clip.

If you look close you can see the trim in the back window of the E30

S10Fan · 12-26-2010, 05:25 PM

Started snowing last night and hasn't stopped, 12" so far. I hate snow by the way.

12" is pretty much our 10-12 year accumulation, bummer getting it in one day. I wouldn't mind it so much if I lived next door to a Wal-Mart, auto parts and was a retired millionaire.

I did clear a path to the garage and worked on the floors of my '50. The driver side is 90% complete along with the passenger side. As soon as this snow clears out I'll be moving the chassis into the garage to begin installing the S-10 frame clip. I might drive this thing in 2011 after all.

*87 chevy silverado* · 12-26-2010, 05:32 PM

started making the 4x4 fram a 2x4 and stacking the stuff up to sell later

S10Fan · 12-26-2010, 06:06 PM

......Forgot the picture.....

*87 chevy silverado* · 12-26-2010, 06:18 PM

yall got alot of snow

joe1982 · 12-26-2010, 09:24 PM

I saw my Chargers lose there last chance at play off hopes..... Not a good day.

87Lowrider · 12-26-2010, 09:32 PM

Renewed my subscription on the board!

Trying to get back involved again... Merry Christmas everyone!

Ken

KQQL IT · 12-26-2010, 09:36 PM

Discovered more bondo sculptures.

foamypirate · 12-26-2010, 09:41 PM

Preparing myself for closing on our house tomorrow. Doing wrist exercises so my hand doesn't fall off signing my signature so many times! =P

StrokinRat · 12-26-2010, 09:46 PM

Bought a Battery Charger/Maintainer and put it on. Took some pictures of the interior to take to a shop to get some prices on getting it wraped in leather.

bmchevy1979 · 12-26-2010, 10:14 PM

Got the motor mounts on frame after that not a single thing except family outings

zimmstoy · 12-26-2010, 10:18 PM

I got some work done on my 87 Monte SS. Didn't do anything on the trucks this weekend (for a change)

therapy · 12-26-2010, 10:22 PM

Started boxing in the frame and made rear guussets on the rear bag mounts...

craazy22 · 12-26-2010, 11:09 PM

Started to weld in the rusty parts in my firewall. Got new mig welder for xmas. Got new 60 gallon 5hp compressor also... sob I will start doing more body work.
Posted via Mobile Device

1BadSS · 12-26-2010, 11:15 PM

Picked up a $50 "Test fitted once and I found all new GM metal for my truck door"

Also picked up new full size inner rockers w/ floor drop offs, battery mount and tray, gauge lens for my tach cluster and a floor support.

dgodecke · 12-27-2010, 10:56 PM

I went from the farm Pic 1, to bare frame pic 2, to a next gen stepside bed Pic 3, to having he motor ready and the cab and bed back on.

Justins76 · 12-28-2010, 12:49 AM

Did my lift blocks in the rear, Bilstein 5100 shocks and redid my drums.

camdNsprayd · 12-28-2010, 01:17 AM

Well i was painting the inside of the bed black on the 81 and had some extra paint so i laid down some tape and painted stripes on the cowl hood..lol..and blacked out the chevy emblem in the grill.
before:

After:

Also removed the old tint and re-tinted all the windows, but no pics of that as it was night time by the time i was finished.

SCOTI · 12-28-2010, 01:26 AM

Swapped a rear Burb/Blazer/sport bumper in place of the 'work' bumper & installed my 'out of sight' tool box.

D13 · 12-28-2010, 08:05 AM

Went to 2 family celebrations + Christmas at home. Finally, yesterday, I removed the rest of the worn out suspension on 1 side of my trailer and installed new springs/shackles/equilizer/bolts etc. 25 degrees and a darn cold wind. Then I took the tractor (had to use the 77 GMC to jump start it) and cleared off the snow from the barn until it wouldn'd go no more - 2' of snow packed so hard that the tractor would ride up on it (and this tractor weighs 4500#)! Another 20' to get to the plowed driveway.

Today I go get the next to last load of 'stuff' out of the family barn, been there for 30 years, now it goes to scrap or into my barn. All that will be left out there are 2 engines that I need my hoist to extract.

I hope to haul a load of scrap this week, just to make room in the barn.

harnalien · 12-28-2010, 08:23 AM

Had to pick my jaw up off the floor after my wife surprised me by buying the camshaft for my ls swap!! She's a good woman.
Posted via Mobile Device

355bullet · 12-28-2010, 11:37 AM

man, i did nothing. Just had family over. next week for sure

jitteryguy · 12-28-2010, 11:46 AM

clean'd out an old store room conect'd to my shop here, start'd set'n up for my new live'n quarter's. the room is 25X12 I already divide'd it in half and made me a nice office. now I'll never be late for work, I'll be live'n at work ! try'n to get it finish'd befor I go on R&R next week.

12-26-2010, 02:15 PM	#1
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,287	What did you get done 12/26/2010 end of year edition Ive been tied up with lots of personal issues the last week. I am still contemplating buying a new shortbed truck that is in better shape than the longbed i have but other than that there has been nothing truck related. I hope all had a good holiday season How about you all did you do anything? __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

12-26-2010, 02:35 PM	#2
eightyfive Registered User Join Date: Apr 2010 Location: Swan River Manitoba Canada Posts: 233	Re: What did you get done 12/26/2010 end of year edition Got some rocker panels for christmas so now i just have to finish insulating my garage and then i can get to welding those bad boys in place. __________________ parts truck- 1982 suburban GMC Sierra Classic first project- 1985 GMC Sierra Classic first truck- 1988 GMC Sierra sle "New" Hot rod 1999 Chevy silverado 5.3L ^^^ Workin my way up the food chain

12-26-2010, 05:04 PM	#3
ghettoluxury Registered User Join Date: Apr 2009 Location: Waynesfield Ohio Posts: 1,991	Re: What did you get done 12/26/2010 end of year edition Got a Tach dash, a tailgate band all the exterior and interior trim today for $50, then traded the rest of a wrecked Hyundai i bought for a 73 GMC Serria Grande front clip. If you look close you can see the trim in the back window of the E30 __________________ 1949 Five Window, 1973 Step Side, 2000 Z71 Last edited by ghettoluxury; 12-26-2010 at 05:07 PM.

12-26-2010, 05:25 PM	#4
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,640	Re: What did you get done 12/26/2010 end of year edition Started snowing last night and hasn't stopped, 12" so far. I hate snow by the way. 12" is pretty much our 10-12 year accumulation, bummer getting it in one day. I wouldn't mind it so much if I lived next door to a Wal-Mart, auto parts and was a retired millionaire. I did clear a path to the garage and worked on the floors of my '50. The driver side is 90% complete along with the passenger side. As soon as this snow clears out I'll be moving the chassis into the garage to begin installing the S-10 frame clip. I might drive this thing in 2011 after all. __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.

12-26-2010, 05:32 PM	#5
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: What did you get done 12/26/2010 end of year edition started making the 4x4 fram a 2x4 and stacking the stuff up to sell later

12-26-2010, 06:06 PM	#6
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,640	Re: What did you get done 12/26/2010 end of year edition ......Forgot the picture..... Attached Images __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.

12-26-2010, 06:18 PM	#7
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: What did you get done 12/26/2010 end of year edition yall got alot of snow

12-26-2010, 09:24 PM	#8
joe1982 .. !WAR FEDOR! .. Join Date: Mar 2009 Location: Oceanside Ca Posts: 546	Re: What did you get done 12/26/2010 end of year edition I saw my Chargers lose there last chance at play off hopes..... Not a good day. __________________ "san diego chargers #1"

12-26-2010, 09:32 PM	#9
87Lowrider Navy Radioman Veteran Join Date: Jul 2007 Location: Western Kentucky Posts: 1,350	Re: What did you get done 12/26/2010 end of year edition Renewed my subscription on the board! Trying to get back involved again... Merry Christmas everyone! Ken __________________ 1987 Chevrolet R10 Silverado BBC Build thread - SOLD 1986 GMC Sierra Classic - SOLD 1957 Chevy Step Side - At the Body Shop Daily Driver; 2005 Chevrolet Silverado 4x4 Z71 Stepside

12-26-2010, 09:36 PM	#10
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,211	Re: What did you get done 12/26/2010 end of year edition Discovered more bondo sculptures.

12-26-2010, 09:41 PM	#11
foamypirate Registered User Join Date: Apr 2009 Location: Pflugerville, TX Posts: 594	Re: What did you get done 12/26/2010 end of year edition Preparing myself for closing on our house tomorrow. Doing wrist exercises so my hand doesn't fall off signing my signature so many times! =P Last edited by foamypirate; 12-26-2010 at 09:41 PM.

12-26-2010, 09:46 PM	#12
StrokinRat Registered User Join Date: Jun 2009 Location: Clinton,MS Posts: 234	Re: What did you get done 12/26/2010 end of year edition Bought a Battery Charger/Maintainer and put it on. Took some pictures of the interior to take to a shop to get some prices on getting it wraped in leather. __________________ 85 Chevy C-10 383 stroker

12-26-2010, 10:14 PM	#13
bmchevy1979 Registered User Join Date: Dec 2010 Location: Visalia, Ca Posts: 707	Re: What did you get done 12/26/2010 end of year edition Got the motor mounts on frame after that not a single thing except family outings __________________ <Brandon> 1974 Chevrolet K5 Blazer 350sbc/SM465/NP205, dana44 front, corp 14bolt rear with 4.10s and a powertrax locker, custom rear bumper 400sbc in the works. 1981 GMC C1500 stepside 250i6, 3spd, 12bolt with 3.08s 2.5/4drop on 15x10 with 275/50r15 81 GMC C3500 cab-chassis dually with utility bed 350sbc, Sm465, 14bolt with 4.10s nv4500 getting ready to go in 1979 Chevrolet K5 R.I.P. http://67-72chevytrucks.com/vboard/s...d.php?t=434096 1976 Chevrolet C10 R.I.P. http://67-72chevytrucks.com/vboard/s...d.php?t=434195

12-26-2010, 10:18 PM	#14
zimmstoy Registered User Join Date: Feb 2008 Location: Cedar Park, TX Posts: 214	Re: What did you get done 12/26/2010 end of year edition I got some work done on my 87 Monte SS. Didn't do anything on the trucks this weekend (for a change) __________________ Kind Regards, Scott

12-26-2010, 10:22 PM	#15
therapy Registered User Join Date: Nov 2010 Location: Spanish Fort,Alabama Posts: 33	Re: What did you get done 12/26/2010 end of year edition Started boxing in the frame and made rear guussets on the rear bag mounts...



Register or Log In To remove these advertisements.

12-26-2010, 11:09 PM	#16
craazy22 Registered User Join Date: Jun 2007 Location: Houston, TX Posts: 230	Re: What did you get done 12/26/2010 end of year edition Started to weld in the rusty parts in my firewall. Got new mig welder for xmas. Got new 60 gallon 5hp compressor also... sob I will start doing more body work. Posted via Mobile Device __________________ 81 chevy stepside 6.0/t56 swap in progress.... 81 chevy silverado k5 2wd 350 tpi and 700r4.. SOLD 07 chevy colorado "work truck" SOLD 02 chevy silverado z71 off road package

12-26-2010, 11:15 PM	#17
1BadSS NOT REALLY BANNED! Join Date: Jul 2004 Location: Shawnee, KS Posts: 1,072	Re: What did you get done 12/26/2010 end of year edition Picked up a $50 "Test fitted once and I found all new GM metal for my truck door" Also picked up new full size inner rockers w/ floor drop offs, battery mount and tray, gauge lens for my tach cluster and a floor support. __________________ 1987 Mustang Coupe - 2.7 Stroker, 78mm turbo, Stainless header, 3" Exh, FMIC, 160lb/hr Injectors, MS3, twin walbro 255's, 34psi. Eating V8's daily. 04 Pontiac GTO 04 Ford Mustang GT 68 C20 LWB stripper truck 73 K5 Cheyenne 76 C20 Sierra Crew SRW 88 K20 Suburban I'm not hammering on metal just to hammer, i'm creating a piece of art.

12-27-2010, 10:56 PM	#18
dgodecke Registered User Join Date: Feb 2010 Location: Poulsbo, wa Posts: 42	Re: What did you get done 12/26/2010 end of year edition I went from the farm Pic 1, to bare frame pic 2, to a next gen stepside bed Pic 3, to having he motor ready and the cab and bed back on. Attached Images __________________ 07 Chev 2500HD Classic Project Ranch Hand, Hauling A$$ since 1973 I was told this Project had a L-72 427 425HP, It did not. It does have a 427 block and parts from various 427 motors. It will end up with a nice strong 454 in the end. It has not been run for 20+ years Frame up restoration started2/15/2010

12-28-2010, 12:49 AM	#19
Justins76 OutOfMyMind & I'llNeverKnowWhy Join Date: Apr 2004 Location: Another world, some other time Posts: 672	Re: What did you get done 12/26/2010 end of year edition Did my lift blocks in the rear, Bilstein 5100 shocks and redid my drums. Attached Images __________________ -Justin-Out of my mind and I'll never know why 1976 Chevrolet Silverado C10 350 4bbl / TH350 Big10 longbed 1986 Pontiac Firebird T-Top 5.0L TPI 700R4 WS6 1992 Pontiac Firebird T-Top 5.0L TBI 700R4 My cardomain page I don't like to save, it's more fun to spend!! Last edited by Justins76; 12-28-2010 at 12:52 AM.

12-28-2010, 01:17 AM	#20
camdNsprayd Registered User Join Date: Jan 2010 Location: Lubbock Tx Posts: 36	Re: What did you get done 12/26/2010 end of year edition Well i was painting the inside of the bed black on the 81 and had some extra paint so i laid down some tape and painted stripes on the cowl hood..lol..and blacked out the chevy emblem in the grill. before: After: Also removed the old tint and re-tinted all the windows, but no pics of that as it was night time by the time i was finished. __________________ http://i2.photobucket.com/albums/y16...leeperz1-1.jpg 2000 Z28 camaro..slammed, cammed, stalled and sprayed LS1 1995 ex-cab GMC sierra 1973 Chevy swb 1981 Chevy swb

12-28-2010, 01:26 AM	#21
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,963	Re: What did you get done 12/26/2010 end of year edition Swapped a rear Burb/Blazer/sport bumper in place of the 'work' bumper & installed my 'out of sight' tool box. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.* Last edited by SCOTI; 12-28-2010 at 01:27 AM.

12-28-2010, 08:05 AM	#22
D13 Registered User Join Date: Feb 2007 Location: Memphis MI Posts: 1,851	Re: What did you get done 12/26/2010 end of year edition Went to 2 family celebrations + Christmas at home. Finally, yesterday, I removed the rest of the worn out suspension on 1 side of my trailer and installed new springs/shackles/equilizer/bolts etc. 25 degrees and a darn cold wind. Then I took the tractor (had to use the 77 GMC to jump start it) and cleared off the snow from the barn until it wouldn'd go no more - 2' of snow packed so hard that the tractor would ride up on it (and this tractor weighs 4500#)! Another 20' to get to the plowed driveway. Today I go get the next to last load of 'stuff' out of the family barn, been there for 30 years, now it goes to scrap or into my barn. All that will be left out there are 2 engines that I need my hoist to extract. I hope to haul a load of scrap this week, just to make room in the barn. __________________ 1987 2 ton 1982 250/TH350 beater in progress Dad's 1981 3/4 L6 3 on tree posi and no options, awaiting restoration or scrapping Plus a mess o' tractors

12-28-2010, 08:23 AM	#23
harnalien TruckincrazY Join Date: May 2004 Location: Haslet, TX Posts: 493	Re: What did you get done 12/26/2010 end of year edition Had to pick my jaw up off the floor after my wife surprised me by buying the camshaft for my ls swap!! She's a good woman. Posted via Mobile Device

12-28-2010, 11:37 AM	#24
355bullet Registered User Join Date: Feb 2010 Location: el paso, tx Posts: 510	Re: What did you get done 12/26/2010 end of year edition man, i did nothing. Just had family over. next week for sure __________________ www.southwestdrags.com www.elpasocalendargirls.com www.msdignition.com www.atomicefi.com https://www.facebook.com/MSDperformance

12-28-2010, 11:46 AM	#25
jitteryguy GoatLube Experss Join Date: Oct 2009 Location: clarksville, Tn. Posts: 1,337	Re: What did you get done 12/26/2010 end of year edition clean'd out an old store room conect'd to my shop here, start'd set'n up for my new live'n quarter's. the room is 25X12 I already divide'd it in half and made me a nice office. now I'll never be late for work, I'll be live'n at work ! try'n to get it finish'd befor I go on R&R next week. __________________ *Goat Lube Express*, locations in Qalat,Afghanistan & Clarksville, Tn. '87 R30 dually 454/TH400 '85 1/2 ton CCSB '92 S10 350/350 '84 MonteCarlo 383/PG/9"ford '78 Malibu wagon 350/350 '78 Cutlass (project family car) '96 S10 Jimmy (Moma's)

Register or Log In To remove these advertisements.