![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Jan 2003
Location: N.Canton Ohio
Posts: 59
|
3800 pounds seem right?
Hey.... I thought I saw someone post that their truck weighed in at 4900 pounds... I just weighed mine at 3800 (certified scale).... how could there be that much difference?
Also, anyone know who might have resonable fiberglass body parts for our trucks? I saw some, but they were about 500-600 just for a hood.... not worth that much to me.... how much weight difference would it make? ~Sean |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
|
![]()
With options and/or 4 wheel drive, weight can vary widely.
Jim |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jun 2003
Location: Richfield MN
Posts: 44
|
Short bed, long bed, 3/4 ton, 1/2 ton, V8, I6,
auto, manual, air, no air ... 3800 seems light, but for a short bed 1/2 ton I6 and 3 speed 2wd maybe ?? Mike D.
__________________
72 3/4 ton 4X4 Suburban (and way to many FSJ's (J series jeeps) |
![]() |
![]() |
![]() |
#4 |
newly minted old timer
Join Date: Dec 1999
Location: Hudson WI
Posts: 3,511
|
my 1972 c20 long horn is 5150, with 2 full gas tanks, one 85 pound dog . 350 motor, th350, 2wd.
on a cert scale....
__________________
____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
|
![]()
MTDave,
Wow! No wonder these trucks do well at 14-16 miles to the gallon. Jim |
![]() |
![]() |
![]() |
#6 |
Formerly yellow72custom
Join Date: May 2001
Location: Austin, TX
Posts: 7,531
|
Mine weighs 3980 lbs. w/o me in it, and almost dry tank of gas. That is a '72 C10, LWB, 350/auto, with PS and PB. I think part of the problem is that my rear bumper must weigh at least 200lbs. It is one of those chrome step bumpers made out of 1/2" thick steel stock. Since i don't tow anything with the truck, i think i will ditch it one day, and maybe my weight will drop to around 3800lbs, lol.
__________________
'72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg |
![]() |
![]() |
![]() |
#7 |
Senior Member
![]() Join Date: Sep 2001
Location: Seattle, WA, USA
Posts: 5,817
|
My C20 2wd weighs in just under 4500 lbs unloaded. Max gvw is 7200 lbs. Whoa, man. Heavy!
__________________
'69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA. |
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: Dec 2001
Location: Redding,CA...USA
Posts: 4,736
|
my 67 c-10 lwb weighs 3690...and still losing
__________________
It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA |
![]() |
![]() |
![]() |
#9 |
Post Whore
![]() Join Date: Feb 2000
Location: Rose Hill, KS, USA
Posts: 12,684
|
My K20 hits right around 5670 with me in it and a load of fuel if I remember correctly.
__________________
1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 |
![]() |
![]() |
![]() |
#10 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Short/Fleet, small block with alluminum intake and headers, Th350, 1/2 tank or so of fuel, and a few normall items(spare tire, jack, 1 liter of mtn dew) came out to 3900 pounds.
![]() |
![]() |
![]() |
![]() |
#11 |
Formerly yellow72custom
Join Date: May 2001
Location: Austin, TX
Posts: 7,531
|
Selling scrap are you longhornmail
![]() That is where i got my weight figures, the scale at the scrap metal yard. No point in selling it anymore, the local yard is offering $.005 a pound for scrap steel and iron. Not even a penny a pound. It costs me more in gas and labor to get it there, lol.
__________________
'72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg |
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Mar 2003
Location: Columbus Ohio
Posts: 1,413
|
Edison...........I thought that was a junkyard..........LOL
|
![]() |
![]() |
![]() |
#13 |
Registered truck nut
Join Date: Dec 1999
Location: Mt. Vernon, Washington, USA
Posts: 1,584
|
Atleast they pay you for scrap. Here they charge 2 1/2 cents a pound to take it from you
__________________
MOUNT VERNON, WASH. STATE Need a part? Just PM me |
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Aug 2002
Location: USA
Posts: 443
|
My truck was 4790 on an old counter-balance type scale (read: accurate) when I had to get a weight for the DMV. I was shocked! But then again that was with a full size spare under the bed and a very heavy diamond plate step bumper in addition to the fact that the truck is a C20, with TH-400 trans, has dual saddle tanks, wood bed (which is heavier than steel?), power brakes, power steering, air conditioning, steel eight lug wagon wheels, bucket seats, etc. So I guess it all adds up!
|
![]() |
![]() |
![]() |
#15 |
20' Daredevil (Ret)
![]() Join Date: May 2003
Location: Jefferson State
Posts: 13,643
|
My long wide K20 was 5300# on certified scales. 350/350, PS, PDB, fact air, heavy step bumper, split rim spare, and saddle tanks - but I can't recall how much fuel.
__________________
- Mike - 1972 K20 LWB 350/350/205 RIP El Jay |
![]() |
![]() |
![]() |
#16 |
The Blazer King
Join Date: Sep 2000
Location: Valrico, Fl (Tampa)
Posts: 1,213
|
Damn. Some of those trucks are heavy. Good thing I have a Topless 2wd Blazer. Low 3,000's.
![]()
__________________
72 2wd Blazer. Its the superbichinest, megacoolinest, superflowinest. |
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Jun 2003
Location: FL
Posts: 19
|
LWB, 350/350, 3840 lb's with full tank. I too am interested in fiberglass body parts and getting weight off the front end.
|
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: May 2003
Location: Phoenix, AZ
Posts: 104
|
With the truck ( lwb c-10, 350 3 speed) empty tanks and a tank/ toolbox in the bed I'm right at 3950.
|
![]() |
![]() |
![]() |
#19 |
huh?
![]() Join Date: May 2000
Location: Washington, Illinois
Posts: 5,692
|
mine was 3680...don't remember if I had any kind of load on it or not....
__________________
Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay |
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Jan 2003
Location: N.Canton Ohio
Posts: 59
|
Mine is a 70 short stepside.... 455 big block, TH400 tranny... half a tank of gas... and tools under the seat.... 3800 seemed light.... I'm pretty happy with it... but, would still like to know a little something about fiberglass.....
~S |
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: Jun 2003
Location: Seattle
Posts: 77
|
![]()
Man, I wonder what my '71 Cheyenne w/the BB and the old '67 camper weighs in at? Good thing the wiener dog is only 11 pounds!
![]()
__________________
Shop Labor $75, if you watch $100, if you help $125, Wisecracks-$25, Boxjobs-don't even think about it. Yes,Cash. |
![]() |
![]() |
![]() |
#22 |
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,403
|
My Longhorn weighs 4040 on the scales, less driver, & about 1/2 tank of fuel. The old truck is pretty stripped tho! I am running alum heads, & intake, Less heater & AC, no inners or front bumper, Jaz plastic buckets & rollin on 1/2 ton suspension. Stock curb weight should have been around 5000 lbs(give or take a tad). The 1/2 ton long wb trucks should run 3800-3900 lbs depending on options......short wb could run in the range of 3500-3600, again depending on options. crazyL, rowin 6 & smiling
![]()
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
![]() |
![]() |
![]() |
#23 |
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
![]()
Had to get rid of a old railroad tie, and had to get it weighted today. 4,440 lbs with a 180 of that me.
I've got a/c,power brakes 700-R4 17" wheels power steering all of the normal stuff. 1/2 ton custome deluxe lwb.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 ![]() Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
![]() |
![]() |
![]() |
#24 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Yeah, edisons is a scrap/junk yar here ont eh west sideof Columbus...pretty good prices too. I think that was when i dumped all the broken parts from a caddy 472 I had last year...that or the Pontiac 350 I dumped...who knoes, that was many many beers ago. :P
|
![]() |
![]() |
![]() |
#25 |
Registered User
Join Date: Jan 2003
Location: N.Canton Ohio
Posts: 59
|
I forgot all about it..... 1/3 of all my sheet metal is rusted off!!!
~S |
![]() |
![]() |
![]() |
Bookmarks |
|
|