The '67 Burb Build Thread - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*project 67 sub* · 01-22-2011, 03:51 PM

Quote:

Originally Posted by 67chevy1series

so am i! you can drive yours correct ? i cant! so you are alot farther than me but i will be gaining on you soon i have been able to get some parts from some of these guys on the site

it runs but i cant drive it right now, cant get it out of the driveway lol. that and the front lights dont work as i have the headlight harness pulled out, and im still waitng for my tags in the mail

*project 67 sub* · 01-22-2011, 03:58 PM

Quote:

Originally Posted by 67chevy1series

the bck of my dash looks like you sandblasted a peice of metal in some spots and then left it for a day so its not horrible got to fix it right away but it is a little rusty and it still wears the original blue back there to

haha, my whole dash is gonna bolt in as well so i dont have to weld it, and can remove it later if need be. the back of this one was kind of like yours but mostly surface rust so i wire wheeled what i could get of it, then proceeded with the rust converter and paint. good luck on yours

67chevy1series · 01-22-2011, 04:24 PM

mine i dont know what i will do

*project 67 sub* · 01-22-2011, 04:27 PM

oh ok, well whatever you do good luck

67chevy1series · 01-22-2011, 04:28 PM

*project 67 sub* · 01-22-2011, 07:10 PM

traded the hood hinges off of my truck that i will no longer be able to use for a passanger side 68 fender that has already had the marker hole welded up, its pretty strait and not rusty but does need a little work.
Name: Photo01221455.jpg
Views: 547
Size: 91.6 KB

Name: Photo01221455.jpg
Views: 547
Size: 91.6 KB

*project 67 sub* · 01-23-2011, 12:50 AM

did some more work, pulled the windshield still out, no rust

and cut out the original dash and took some pics while i was at it.

Name: Photo01221619.jpg
Views: 486
Size: 109.0 KB

Name: Photo01221620.jpg
Views: 522
Size: 76.6 KB

Name: Photo01221620_1.jpg
Views: 525
Size: 79.2 KB

Name: Photo01221619_1.jpg
Views: 525
Size: 84.3 KB

Name: Photo01221621.jpg
Views: 521
Size: 95.6 KB

*project 67 sub* · 01-23-2011, 12:51 AM

out with the old and making room for the new
Name: Photo01221730.jpg
Views: 526
Size: 102.8 KB

Name: Photo01221904.jpg
Views: 520
Size: 101.7 KB

Name: Photo01221958.jpg
Views: 522
Size: 83.5 KB

67chevy1series · 01-23-2011, 12:56 AM

wow! now put that new dash in!

*project 67 sub* · 01-23-2011, 01:07 AM

haha nah its not ready yet lol. still need to figure out how i wanna attach it accross the top under the windshield. and i need to finish drilling holes for a few things and then do the bodywork to it, then it can be put in, also need to clean up the back side of the fire wall under behind the dash and paint it as well.

67chevy1series · 01-23-2011, 01:14 AM

oh wow your truck , i mean burb will be down for awhile

*project 67 sub* · 01-23-2011, 01:17 AM

haha nah, it still runs lol

67chevy1series · 01-23-2011, 01:19 AM

oh so you plan on drivin with no dash at all?

67chevy1series · 01-23-2011, 01:20 AM

a thought came to mind ..... hey honey just jiggle that gob of wires...

*project 67 sub* · 01-23-2011, 01:27 AM

hahaa no dont plan on driving it like that, but if for some reason i had to drive it, it doesnt need to be their to run lol. also will be cleaning up or replacing/modifying the harness with a newer ('70) fuse block and some connectors to hook up stock style headlight/wiper switches again.

67chevy1series · 01-23-2011, 01:28 AM

so you are gonna use the 70 and up engine harness

*project 67 sub* · 01-23-2011, 01:39 AM

no, i have one that i bought from brothers that was modded for hei and stuff, also have a headlight harness that came off the same vehicle that i put all of my headlight connectors and stuff on to use, its also been modded to use a 1 wire alternator, will mod it later to use a internal reg alternator untill i can afford a brand new one

67chevy1series · 01-23-2011, 01:40 AM

oh ok

*project 67 sub* · 01-23-2011, 01:48 AM

yup lol.

**kev2809** · 01-23-2011, 10:45 AM

you plan on removing the side quarter windows?

reason why i ask is because i was trying to tally up what i need to get mine ready for paint (as far glass, rubber, bumpers, etc.) and LMC has the rubbers for 300/set! so be careful if you dont plan on buying new ones...

*project 67 sub* · 01-23-2011, 05:49 PM

are you talking about the big side windows???

**kev2809** · 01-23-2011, 05:58 PM

the big side windows towards the back...
Posted via Mobile Device

*project 67 sub* · 01-23-2011, 06:03 PM

those were out when i bought it, so i had to buy the seals for them and install them. eventually all the glass will come back out but nat at this time lol.

**kev2809** · 01-23-2011, 06:07 PM

oh ok...do you remember how much you paid and where ya got em?

*project 67 sub* · 01-23-2011, 06:15 PM

got them from here if i remember correctly.
http://s-c-t-p.com/blazersuburban.html

01-22-2011, 04:24 PM	#228
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: The '67 Burb Build Thread mine i dont know what i will do

01-22-2011, 04:27 PM	#229
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread oh ok, well whatever you do good luck

01-22-2011, 04:28 PM	#230
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: The '67 Burb Build Thread

01-22-2011, 07:10 PM	#231
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread traded the hood hinges off of my truck that i will no longer be able to use for a passanger side 68 fender that has already had the marker hole welded up, its pretty strait and not rusty but does need a little work. Last edited by project 67 sub; 01-22-2011 at 07:12 PM.

01-23-2011, 12:50 AM	#232
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread did some more work, pulled the windshield still out, no rust and cut out the original dash and took some pics while i was at it.

01-23-2011, 12:51 AM	#233
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread out with the old and making room for the new Last edited by project 67 sub; 01-23-2011 at 12:51 AM.

01-23-2011, 12:56 AM	#234
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: The '67 Burb Build Thread wow! now put that new dash in!

01-23-2011, 01:07 AM	#235
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread haha nah its not ready yet lol. still need to figure out how i wanna attach it accross the top under the windshield. and i need to finish drilling holes for a few things and then do the bodywork to it, then it can be put in, also need to clean up the back side of the fire wall under behind the dash and paint it as well. Last edited by project 67 sub; 01-23-2011 at 01:08 AM.

01-23-2011, 01:14 AM	#236
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: The '67 Burb Build Thread oh wow your truck , i mean burb will be down for awhile

01-23-2011, 01:17 AM	#237
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread haha nah, it still runs lol

01-23-2011, 01:19 AM	#238
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: The '67 Burb Build Thread oh so you plan on drivin with no dash at all?

01-23-2011, 01:20 AM	#239
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: The '67 Burb Build Thread a thought came to mind ..... hey honey just jiggle that gob of wires...

01-23-2011, 01:27 AM	#240
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread hahaa no dont plan on driving it like that, but if for some reason i had to drive it, it doesnt need to be their to run lol. also will be cleaning up or replacing/modifying the harness with a newer ('70) fuse block and some connectors to hook up stock style headlight/wiper switches again.

01-23-2011, 01:28 AM	#241
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: The '67 Burb Build Thread so you are gonna use the 70 and up engine harness

01-23-2011, 01:39 AM	#242
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread no, i have one that i bought from brothers that was modded for hei and stuff, also have a headlight harness that came off the same vehicle that i put all of my headlight connectors and stuff on to use, its also been modded to use a 1 wire alternator, will mod it later to use a internal reg alternator untill i can afford a brand new one



Register or Log In To remove these advertisements.

01-23-2011, 01:40 AM	#243
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: The '67 Burb Build Thread oh ok

01-23-2011, 01:48 AM	#244
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread yup lol.

01-23-2011, 10:45 AM	#245
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: The '67 Burb Build Thread you plan on removing the side quarter windows? reason why i ask is because i was trying to tally up what i need to get mine ready for paint (as far glass, rubber, bumpers, etc.) and LMC has the rubbers for 300/set! so be careful if you dont plan on buying new ones... __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

01-23-2011, 05:49 PM	#246
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread are you talking about the big side windows??? Last edited by project 67 sub; 01-23-2011 at 05:50 PM.

01-23-2011, 05:58 PM	#247
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: The '67 Burb Build Thread the big side windows towards the back... Posted via Mobile Device __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

01-23-2011, 06:03 PM	#248
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread those were out when i bought it, so i had to buy the seals for them and install them. eventually all the glass will come back out but nat at this time lol.

01-23-2011, 06:07 PM	#249
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: The '67 Burb Build Thread oh ok...do you remember how much you paid and where ya got em? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

01-23-2011, 06:15 PM	#250
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread got them from here if i remember correctly. http://s-c-t-p.com/blazersuburban.html

Register or Log In To remove these advertisements.