scrap trucks pricing

[teeitup]

I hauled in a 69 C20 with basically everything but hood and drivers fender ended up weighing 3500#'s, $350 for it. I'm afraid they are going to start disappearing more around the USA

[lilred67]

i cut up 2 rolling chassis, bed, cab, hood, door, and some misc. b.s.. all together was 3860#. weighed tin and short iron seperate and got $446.50. i'm sure there be more cut up or crushed. there was not anything worth saving in what i hauled off. i don't mind crushing them as long as all the good stuff is spared!!!

[oldgold70c10]

Man this is scary. I am a bit at a time, starting to hoard more parts because all my local yards have crushed what 67-72 trucks they had.

[snj8198]

Yup, when iron scrap started peaking last summer and the year before I noticed the local salvaged yards cleaned house. Prices were so good that a couple guys down the street were paying as much as $200 for old long box pickups and were getting $400-450 per truck scrap value. Only catch was they had to break them down to 3 foot chunks, but they had a system to where they could have a truck chopped and loaded in 3 hours. Doing the math, that's a good hourly wage.

[dmack91]

It is getting hard enough just to find a wrecking yard any more, let alone one that has older trucks. Everything else is just throw-away crap anymore.

[BarryB]

I sent a 67 to the crusher not long ago. it brought 416. I've got a 72 cheyenne headed there soon. But this is after I remove all the good parts.

[too much stuff]

I crushed a 72 3/4 ton sierra last week. No engine, no trans, no rear end wheels or tires, no grill, bumper, brake booster and missing about 1/2 of the interior... Still got $266 for what was left. Prices did drop a little this month already. Just pulled another in the garage to strip down about an hour ago. Hate to crush, but...

[mcbassin]

Start hoarding now while you can. I have seen some really nice parts trucks at the scrap yard. It's easy to see why at those prices.
I had a guy catch me in the road, hey you want to sell those old cars and trucks back there? He was looking at google earth or drove on my neighbors property, not sure? anyway, I said yeah I might sell if the price is right. He said I usually offer $50 to $100 depending on how much they weigh.
Dude,
I got a 67, 68 camaro, 2 67-72 classic swb chassis, a 67 short step, 70 cst 3/4 and a 69 GMC. $100 ea.? really? Mind you they need restored but I think I will keep them.

[dubds10]

Poor old vehicles...I'll hoard these old trucks before sending them to the scraper. I see too many guys in the states sending these classics to the scraper for over priced metal. Up here we get $100-200 for a car..that's it. Luckily I've found a few guys in my time willing to sell below scrap just to keep a classic from being crushed. Those are true car guys

[doaner70]

Yeah I went to my buddies yard the other day to get some parts for my 70 stepside. he had 4 67-72 crushed them all other then the wrecker he just got in and one was a great parts truck. Scrap around here is 275 a ton now and still going up this month.

[Jeffs70]

all I can say is this is sad when people start crushing old cars/trucks because they dont care about anything other then putting money in their pockets.

I will hoarder all the parts from these trucks as long as I live before crushing one. I would even take the time to build one from parts I dont need just to be able to keep it going before crushing it.

[teeitup]

I understand what you guys are saying about hoarding, I part out the trucks as far down as I can then take them to scrap. If you'd see my shop yuo'd think hoarder for sure

[Classic Bowties]

Originally Posted by mcbassin

Start hoarding now while you can. I have seen some really nice parts trucks at the scrap yard. It's easy to see why at those prices.
I had a guy catch me in the road, hey you want to sell those old cars and trucks back there? He was looking at google earth or drove on my neighbors property, not sure? anyway, I said yeah I might sell if the price is right. He said I usually offer $50 to $100 depending on how much they weigh.
Dude,
I got a 67, 68 camaro, 2 67-72 classic swb chassis, a 67 short step, 70 cst 3/4 and a 69 GMC. $100 ea.? really? Mind you they need restored but I think I will keep them.

Had a similar thing happen just last Wednesday, normally I keep the back gate locked up tight but I had been moving some stuff around so it was wide open. So this tweeker looking dude come's walking in asking if I would be interested in selling any of the trucks and when I ask him which one, he says any of them that are complete with motors, trans and radiators... he starts pointing at a couple of the trucks (which both were BB running trucks)... then in the same breath/sentence says he'd pay up to $250. each, with a cool head I say nope, not interested in selling anything at that price and then he starts asking what I was thinking I just said nothing is for sale . As I am closing & locking the gate behind him, I thought about telling him that I could get his offer out of just a few brackets or pullies... but I didn't. Mel

[674x4ton]

My couin sent a 69 chevy long bed and a 95% rust free 65 chevy long bed with 48,000 miles to the scrap yard.I really wanted the 65 chevy,now i'am going to look for a small back window 67 chevy pickup.

[Becker67]

I hauled a 3/4 ton frame with the bed and core support. It had some added gas tanks and got $347 for it. It was $230 a ton here. Now it went down to $200 a ton here. When i was waiting to unload two 67-72's came in.

[Classic Bowties]

Originally Posted by Becker67

When i was waiting to unload two 67-72's came in.

What's this world coming to these days...

[Livrat]

Its $250 per ton here.. just hauled in an 85 S10 blazer 4X4, complete with a couple "extras" tossed inside.. brought $500 and change.. wow..
I have discovered that scrap prices here seem to slide right along with gas prices.. gas goes up, so does scrap and vice versa.

[teeitup]

AH MEL your killing me!!!!!!!

[Dave]

Mel, love the buddy buckets and seat belts w/ shoulder harness and '68 only canister holder.

[Jeffs70]

oh man this is making me sick . ~!@#$%^&

[no moa]

I saw a 60s van and I think an old ford headed to the crusher. I all but begged them to call the number on my card if they got any 67-72 trucks in id come right up.
No way, I'd have to call everyday. Sad.
Posted via Mobile Device

[gearys 5600]

I crushed 10 67-72 chevy trucks about a year ago. I thought I was done with them. A couple of months later I bought two more for parts trucks because I found myself needing parts that I had crushed. I will not crush these anytime soon.

[BadaSs_Cal]

This thread has made me sad. I hate to say it but on the brightside, every truck that is crushed brings up the value of ours just a little more.

That being said, what happened to the running $500-1k trucks I used to see on CL all the time?.. Now the min. price I see anymore is $1700..

[dubds10]

There's still a few $500-1000 deals out there on CL. I find so many all over but unfortunately I can only fit so many trucks in my drive way and garage lol Need to sell the blazer then I can start collecting a few more

I'm starting to think it might be worth my time to haul my scrap metal across the boarder into WA.

[chevy72pu]

I went to the recycle center this week with a load of non automotive metal.Got 9 cents a lb. Sold 22 lbs of #1 copper for $66. Sign said $11.25lb for cars. As I was leaving a truck rolled in hauling a 70's model Caddy Brougham limo. No telling what he got for it. I saw several truck chassis but the bodies were gone. Maybe some one saved those.