KY Gear vendors over/under drive 4 sale n.i.b. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

junkyardjohn · 02-12-2011, 10:24 AM

TIME TO CLEAR OUT A FEW PROJECTS. I BOUGHT THIS IN NEW IN 2006 & LOOKS LIKE I HAVE MORE PROJECTS GOING THAN I'LL EVER BE ABLE TO FINISH, IF I LIVE TO BE 100. IT A COMPLETE 0 MILES KIT FOR A T-400 THATS NEVER BEEN INSTALLED. I NEED $2000 FOR IT. THEY COST FROM $2600 TO AROUND $3000 RETAIL & $2000 IS QUITE A BIT UNDER WHOLESALE. DUE SOME RESEARCH

. I ALSO HAVE A COUPLE OF SHORT SHAFT TURBO-400s. THEY'RE COMPLETE 0 MILE, REBUILT BY A TRAN.S SHOP WITH A SHIFT KIT, KEVLAR CLUTCHES & A NEW TORQUE CONV. FOR AN EXTRA $500. THESE ARE TO BE PICKED UP IN SOUTHERN KY. OR SHIPPED AT THE BUYERS EXPENSE. THANKS JOHN

jorgensensc · 02-12-2011, 10:41 AM

Your killing me! I really do need this for the big block c20 burb. How much would shipping to 77018 be? I would still need to shorten the driveshaft on the burb though right? Is everything else needed to install included? Do you need anything in trade? Got a new vintage air sure fit system never installled. Few other things too. New air compressor setup for bags never installed. Let me know.
Shawn
Posted via Mobile Device

junkyardjohn · 02-12-2011, 11:02 AM

It's complete. I only opened the box to verify the contence. I had just the g.v. Stuff shipped from killian texas when i got it & it was around $55. Yes you will have to shorten the driveshaft. It's a bargain. I had 6 trucks & just bought another one friday. Spreading myself just a little too thin.

paypal is o-k with me. John

**special-K** · 02-12-2011, 01:21 PM

I have an M22 and plan to use a GV. I imagine since the yoke is the same as a TH400 I would use the same application. Ya think? I know I should check with GV to be absolutely sure,but I can't see why not. Hmmm......

junkyardjohn · 02-12-2011, 01:49 PM

I'm not sure. I'd advise calling g.v. & speaking to their tech. Line guys. There # is 1-800-862-6658 or 210-654-7171. John

junkyardjohn · 02-12-2011, 09:54 PM

IT'S A BARGAIN..... SOMEBODY JUMP... QUICK.

JOHN

junkyardjohn · 02-13-2011, 11:18 PM

SOMEBODY MUST NEED THIS... I WANTED ONE FOREVER & NOW I'M SELLING IT FOR ALOT LESS THAN I PAID FOR IT.

SOMETIMES I SURPRIZE EVEN ME. MY STUPIDITY KNOWS NO BOUNDS.

JOHN

jorgensensc · 02-13-2011, 11:23 PM

Oh I want it. I'm just trying to figure out how to get the funds together. Got another baby on the way and all my play funds are getting eaten up with another crib and more stuff for the baby. (our daughter is 8 yrs old, son is 12 months this Sunday, and we have another boy coming in April.) do you need anything in trade?
Shawn
Posted via Mobile Device

bigsnookmaster · 02-13-2011, 11:29 PM

John, do you have a part# ?

junkyardjohn · 02-13-2011, 11:38 PM

Quote:

Originally Posted by bigsnookmaster

john, do you have a part# ?

yes i do... It's in my shop & i'll get it for you in the morning. I have all the paperwork & receipts. John

bigsnookmaster · 02-13-2011, 11:59 PM

Thanks John, I'm real interested.

**Hart_Rod** · 02-14-2011, 08:58 AM

Great deal!

kellytheaker · 02-14-2011, 11:18 AM

so please explain the system please - i have had overdives and put a feww ruxtell axles in model Ts , but i have a 4wheel drive 72 with a 350 -350trans and will it fit or install or ?

junkyardjohn · 02-14-2011, 11:28 AM

Here's a couple of picks. I GUESS THE 2ND IS NOT READABLE. I WAS TRYING TO SHOW THE MOD. # IN THE LITERATURE. IT IS MOD. # 3D0400 & REPLACES A 4" TAIL HOUSING. IT'S RATED FOR UP TO 1200FT. LBS OF TORQUE. I'VE ONLY OPENED UP THE BOX FOR THE ACTUAL LITTLE TRANSMISSION. ALL OF THE OTHERS ARE STILL UN-OPENED FROM THE FACTORY. THIS WAS $2745.00 IN SEPT. OF 06 . I JUST BOUGHT ANOTHER TRUCK FIDAY & SOMETHING HAS TO GO. I'M ALMOST 53 & HAVE ABOUT 40 YEARS OF PROJECTS STARING ME IN THE FACE.

jorgensensc · 02-14-2011, 02:29 PM

John,
Am I to assume that since you haven't replied to my question of needing any parts on trade then you don't need any? I'm trying to figure out a way to offset the out of pocket cost. Please let me know.
Posted via Mobile Device

bigsnookmaster · 02-14-2011, 03:26 PM

John, I will have to pass. I did some logical thinking, and I can't at the moment. Good luck on the sale. Great deal!

junkyardjohn · 02-14-2011, 04:58 PM

Quote:

Originally Posted by jorgensensc

John,
Am I to assume that since you haven't replied to my question of needing any parts on trade then you don't need any? I'm trying to figure out a way to offset the out of pocket cost. Please let me know.
Posted via Mobile Device

I'M SORRY... I'VE BEEN BUSIER THAN A ONE ARM PAPER HANGER. JUST AFTER I GOT BACK ON THE COMP. THIS MORNING THE POWER WENT OUT... SO I WENT GROCERY SHOPPING. I CAN'T THINK OF A SINGLE THING I NEED IN WAY OF A SWAP, BUT I'M ALWAYS OPEN TO OFFERS... YA NEVER KNOW. THIS THINGS BEEN PAID FOR FOR YEARS & IT'S NOT EATING.

I'M BUYING A TRUCK THRU. THE GOVT. & YOU WOULDN'T BELIEVE THE AMOUNT OF PAPERWORK....... (IT BETTER BE WORTH IT) JOHN

junkyardjohn · 02-14-2011, 05:01 PM

Quote:

Originally Posted by kellytheaker

so please explain the system please - i have had overdives and put a feww ruxtell axles in model ts , but i have a 4wheel drive 72 with a 350 -350trans and will it fit or install or ?

sorry kelly... This is for a t-400 2wd . You're best bet is to call gear vendors at 800-999-9555 as i bet they can answer you're questions a whole lot better than me.

john

kellytheaker · 02-14-2011, 05:07 PM

Just called the tech line and it is for vintage air and they are in no way associated with GV . is the number wrong or ? i am just looking for answers to be able to buy with confidence . Thanks

junkyardjohn · 02-14-2011, 05:27 PM

That is awfully strange... Hmmm try www.gearvendors.com thats the no. I've got on their litterature. It's weird though cause i had vintage air paperwork all over my desk yesterday. But i triple checked. (update) just called that number..... Hello... Gear vendors. Try one more time.

john

junkyardjohn · 02-15-2011, 08:31 AM

I KNOW SOMEONE NEEDS THIS. IT CUT YOUR FINAL DRIVE ENGINE RPMs TO .78-1 INSTEAD OF 1-1 & MAKES YOUR T-400 A SIX SPEED. JOHN

Vintage Windmills · 02-15-2011, 02:40 PM

Tempting! but I should probably wait until i have the other parts for my 67. Then again i could take the 400 out of the 69 parts truck and put in the 71 with this behind the 402. Then i could tow without worrying about the 700r4.

junkyardjohn · 02-15-2011, 04:31 PM

I CAN PRETTY WELL GARENTEE YOU'LL NEVER FIND A BETTER PRICE ON THIS WHOLESALE. I'VE EVEN GOT A COUPLE OF ZERO MILE TURBO 400s. GO AHEAD.... JUMP.

JOHN

Chris H · 02-15-2011, 06:05 PM

Hey John,
Offer sent via PM...

junkyardjohn · 02-15-2011, 07:35 PM

CHRIS... SENT YOU A P.M. WITH MY PHO. # . LOOKS LIKE YOU'LL BE OVERDRIVNG & UNDERDRIVING THIS SUMMER. CONGRATS

JOHN

02-12-2011, 10:24 AM	#1
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	Gear vendors over/under drive 4 sale n.i.b. TIME TO CLEAR OUT A FEW PROJECTS. I BOUGHT THIS IN NEW IN 2006 & LOOKS LIKE I HAVE MORE PROJECTS GOING THAN I'LL EVER BE ABLE TO FINISH, IF I LIVE TO BE 100. IT A COMPLETE 0 MILES KIT FOR A T-400 THATS NEVER BEEN INSTALLED. I NEED $2000 FOR IT. THEY COST FROM $2600 TO AROUND $3000 RETAIL & $2000 IS QUITE A BIT UNDER WHOLESALE. DUE SOME RESEARCH . I ALSO HAVE A COUPLE OF SHORT SHAFT TURBO-400s. THEY'RE COMPLETE 0 MILE, REBUILT BY A TRAN.S SHOP WITH A SHIFT KIT, KEVLAR CLUTCHES & A NEW TORQUE CONV. FOR AN EXTRA $500. THESE ARE TO BE PICKED UP IN SOUTHERN KY. OR SHIPPED AT THE BUYERS EXPENSE. THANKS JOHN Attached Images __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

02-12-2011, 10:41 AM	#2
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: Gear vendors over/under drive 4 sale n.i.b. Your killing me! I really do need this for the big block c20 burb. How much would shipping to 77018 be? I would still need to shorten the driveshaft on the burb though right? Is everything else needed to install included? Do you need anything in trade? Got a new vintage air sure fit system never installled. Few other things too. New air compressor setup for bags never installed. Let me know. Shawn Posted via Mobile Device __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

02-12-2011, 11:02 AM	#3
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	Re: Gear vendors over/under drive 4 sale n.i.b. It's complete. I only opened the box to verify the contence. I had just the g.v. Stuff shipped from killian texas when i got it & it was around $55. Yes you will have to shorten the driveshaft. It's a bargain. I had 6 trucks & just bought another one friday. Spreading myself just a little too thin. paypal is o-k with me. John __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

02-12-2011, 01:21 PM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Gear vendors over/under drive 4 sale n.i.b. I have an M22 and plan to use a GV. I imagine since the yoke is the same as a TH400 I would use the same application. Ya think? I know I should check with GV to be absolutely sure,but I can't see why not. Hmmm...... __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-12-2011, 01:49 PM	#5
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	Re: Gear vendors over/under drive 4 sale n.i.b. I'm not sure. I'd advise calling g.v. & speaking to their tech. Line guys. There # is 1-800-862-6658 or 210-654-7171. John __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

02-12-2011, 09:54 PM	#6
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	Re: Gear vendors over/under drive 4 sale n.i.b. IT'S A BARGAIN..... SOMEBODY JUMP... QUICK. JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

02-13-2011, 11:18 PM	#7
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	Re: Gear vendors over/under drive 4 sale n.i.b. SOMEBODY MUST NEED THIS... I WANTED ONE FOREVER & NOW I'M SELLING IT FOR ALOT LESS THAN I PAID FOR IT. SOMETIMES I SURPRIZE EVEN ME. MY STUPIDITY KNOWS NO BOUNDS. JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

02-13-2011, 11:23 PM	#8
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: Gear vendors over/under drive 4 sale n.i.b. Oh I want it. I'm just trying to figure out how to get the funds together. Got another baby on the way and all my play funds are getting eaten up with another crib and more stuff for the baby. (our daughter is 8 yrs old, son is 12 months this Sunday, and we have another boy coming in April.) do you need anything in trade? Shawn Posted via Mobile Device __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

02-13-2011, 11:29 PM	#9
bigsnookmaster Registered User Join Date: Jan 2008 Location: St.Petersburg,Fl Posts: 1,267	Re: Gear vendors over/under drive 4 sale n.i.b. John, do you have a part# ? __________________ greg http://community.webshots.com/user/68406Stepside

02-13-2011, 11:59 PM	#11
bigsnookmaster Registered User Join Date: Jan 2008 Location: St.Petersburg,Fl Posts: 1,267	Re: Gear vendors over/under drive 4 sale n.i.b. Thanks John, I'm real interested. __________________ greg http://community.webshots.com/user/68406Stepside

02-14-2011, 08:58 AM	#12
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,840	Re: Gear vendors over/under drive 4 sale n.i.b. Great deal! __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

02-14-2011, 11:18 AM	#13
kellytheaker Registered User Join Date: Dec 2009 Location: ontario Canada Posts: 412	Re: Gear vendors over/under drive 4 sale n.i.b. so please explain the system please - i have had overdives and put a feww ruxtell axles in model Ts , but i have a 4wheel drive 72 with a 350 -350trans and will it fit or install or ?

02-14-2011, 11:28 AM	#14
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	Re: Gear vendors over/under drive 4 sale n.i.b. Here's a couple of picks. I GUESS THE 2ND IS NOT READABLE. I WAS TRYING TO SHOW THE MOD. # IN THE LITERATURE. IT IS MOD. # 3D0400 & REPLACES A 4" TAIL HOUSING. IT'S RATED FOR UP TO 1200FT. LBS OF TORQUE. I'VE ONLY OPENED UP THE BOX FOR THE ACTUAL LITTLE TRANSMISSION. ALL OF THE OTHERS ARE STILL UN-OPENED FROM THE FACTORY. THIS WAS $2745.00 IN SEPT. OF 06 . I JUST BOUGHT ANOTHER TRUCK FIDAY & SOMETHING HAS TO GO. I'M ALMOST 53 & HAVE ABOUT 40 YEARS OF PROJECTS STARING ME IN THE FACE. Attached Images __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

02-14-2011, 02:29 PM	#15
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: Gear vendors over/under drive 4 sale n.i.b. John, Am I to assume that since you haven't replied to my question of needing any parts on trade then you don't need any? I'm trying to figure out a way to offset the out of pocket cost. Please let me know. Posted via Mobile Device __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

02-14-2011, 03:26 PM	#16
bigsnookmaster Registered User Join Date: Jan 2008 Location: St.Petersburg,Fl Posts: 1,267	Re: Gear vendors over/under drive 4 sale n.i.b. John, I will have to pass. I did some logical thinking, and I can't at the moment. Good luck on the sale. Great deal! __________________ greg http://community.webshots.com/user/68406Stepside



Register or Log In To remove these advertisements.

02-14-2011, 05:07 PM	#19
kellytheaker Registered User Join Date: Dec 2009 Location: ontario Canada Posts: 412	Re: Gear vendors over/under drive 4 sale n.i.b. Just called the tech line and it is for vintage air and they are in no way associated with GV . is the number wrong or ? i am just looking for answers to be able to buy with confidence . Thanks

02-14-2011, 05:27 PM	#20
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	Re: Gear vendors over/under drive 4 sale n.i.b. That is awfully strange... Hmmm try www.gearvendors.com thats the no. I've got on their litterature. It's weird though cause i had vintage air paperwork all over my desk yesterday. But i triple checked. (update) just called that number..... Hello... Gear vendors. Try one more time. john __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

02-15-2011, 08:31 AM	#21
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	Re: Gear vendors over/under drive 4 sale n.i.b. I KNOW SOMEONE NEEDS THIS. IT CUT YOUR FINAL DRIVE ENGINE RPMs TO .78-1 INSTEAD OF 1-1 & MAKES YOUR T-400 A SIX SPEED. JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

02-15-2011, 02:40 PM	#22
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Gear vendors over/under drive 4 sale n.i.b. Tempting! but I should probably wait until i have the other parts for my 67. Then again i could take the 400 out of the 69 parts truck and put in the 71 with this behind the 402. Then i could tow without worrying about the 700r4. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

02-15-2011, 04:31 PM	#23
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	Re: Gear vendors over/under drive 4 sale n.i.b. I CAN PRETTY WELL GARENTEE YOU'LL NEVER FIND A BETTER PRICE ON THIS WHOLESALE. I'VE EVEN GOT A COUPLE OF ZERO MILE TURBO 400s. GO AHEAD.... JUMP. JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

02-15-2011, 06:05 PM	#24
Chris H 72 C30 Trailer Queen Join Date: Dec 1999 Location: SE MN, USA Posts: 794	Re: Gear vendors over/under drive 4 sale n.i.b. Hey John, Offer sent via PM... __________________ Chris H 72 C30 133" 72 C30 157" flat-dump 69 C10 short fleet 71 ElCamino 2000 K2500 crewcab shortbed (sold, sorry old friend) 2005 GMC 2500HD shortcrew Duramax 2006 K1500 RCSB and a couple other projects/parts

02-15-2011, 07:35 PM	#25
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	Re: Gear vendors over/under drive 4 sale n.i.b. CHRIS... SENT YOU A P.M. WITH MY PHO. # . LOOKS LIKE YOU'LL BE OVERDRIVNG & UNDERDRIVING THIS SUMMER. CONGRATS JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

Register or Log In To remove these advertisements.