TX Cleaning out garage need to move some metal - The 1947 - Present Chevrolet & GMC Truck Message Board Network

WILD WILLIE · 03-15-2011, 05:35 PM

Heres some of what i have for sale
nice set of 67 doors with no speaker holes 175.00
nice set of 70 doors with speaker holes 170.00
nice set of rust free 68 fenders sold as a set 160.00
new 68 drivers fender with inner fender for 100.00
ruff 67 pass fender needs cup and has dent in rear of fender 45.00
ruff 67-68 hood has a bow in the center 65.00
pass rear step side fender 50.00
cowl panels with antenna hole 20.00 each
5lug suspension complete 75.00
power steering gear box 67-72 40.00
67 gmc painted grill and core support has rust in core support grill has some small dents 60.00
some cab parts that i can cut up if needed ?
70 chevy emblems / 350 fender emblems 25.00
cell 940-733-8076
prefer not to ship
located 2.5 hrs north west of dallas and 1 hour south of wichita falls

tow guys · 03-15-2011, 06:42 PM

I'm interested in those fenders if you're willing to ship to zip 08721.
Posted via Mobile Device

Vintage Windmills · 03-15-2011, 06:58 PM

Can you post some pics of the 67 doors or email to me at jdherrig@yahoo.com? I'm interested in those.

CORSAIR · 03-15-2011, 06:59 PM

Wouldn't happen to have a 16" x 6.5" 6 lug steel wheel?? Looking for one

WILD WILLIE · 03-16-2011, 09:50 AM

Quote:

Originally Posted by tow guys

i'm interested in those fenders if you're willing to ship to zip 08721.
posted via mobile device

i am so far in the sticks its really hard to ship but thanks for asking

WILD WILLIE · 03-16-2011, 09:51 AM

Quote:

Originally Posted by CORSAIR

Wouldn't happen to have a 16" x 6.5" 6 lug steel wheel?? Looking for one

NO 16.5 WHEELS HAVE PLENTY OF 15" thanks for asking

WILD WILLIE · 03-16-2011, 09:54 AM

Quote:

Originally Posted by Vintage Windmills

Can you post some pics of the 67 doors or email to me at jdherrig@yahoo.com? I'm interested in those.

here is the pics

Vintage Windmills · 03-16-2011, 10:16 AM

Quote:

Originally Posted by WILD WILLIE

here is the pics

How about the bottom and seam area on the lower edge? Any dents anywhere on the doors. I'm looking for super nice driver that has show quality potential.

WILD WILLIE · 03-16-2011, 11:22 AM

Quote:

Originally Posted by Vintage Windmills

How about the bottom and seam area on the lower edge? Any dents anywhere on the doors. I'm looking for super nice driver that has show quality potential.

no rust had some surface rust on the door where you see the red paint I sanded the rust off and just hit it with some spray paint but their are the mirror holes in the doors but rust free can get some pics tonight

Vintage Windmills · 03-16-2011, 12:57 PM

Quote:

Originally Posted by WILD WILLIE

no rust had some surface rust on the door where you see the red paint I sanded the rust off and just hit it with some spray paint but their are the mirror holes in the doors but rust free can get some pics tonight

Sounds good, So there are no pinholes anywhere on these 67 doors? What about dents? Really need something easily restorable here.

WILD WILLIE · 03-16-2011, 01:59 PM

Quote:

Originally Posted by Vintage Windmills

Sounds good, So there are no pinholes anywhere on these 67 doors? What about dents? Really need something easily restorable here.

i am sure there are small door dings you cant see till you sand it down but no major dents

matt67350 · 03-16-2011, 03:38 PM

nice set of rust free 68 fenders sold as a set 160.00
Would like to see them first.
pm address to me please.
thanks,
Matthew

WILD WILLIE · 03-16-2011, 05:06 PM

Quote:

Originally Posted by matt67350

nice set of rust free 68 fenders sold as a set 160.00
Would like to see them first.
pm address to me please.
thanks,
Matthew

pm sent

**70shortfleet** · 03-16-2011, 05:45 PM

If there are no dents in that right headlight bezel that is hanging there, how much shipped to 63376

Nathans71 · 03-16-2011, 05:51 PM

Looking for a good glove box hinge, working spring. 40047. Thanks

WILD WILLIE · 03-22-2011, 10:13 AM

I HAVE SOLD ALOT OF ITEMS I HAVE 3 PASS SIDE DOORS LEFT 50.00 EACH YOUR CHOICE AND THE REST OF WHAT I HAVE LEFT IS BELOW.

Join Date: Jun 2006
Location: OLNEY TEXAS
Posts: 294
Cleaning out garage need to move some metal

--------------------------------------------------------------------------------

Heres some of what i have for sale
nice set of 67 doors with no speaker holes 175.00 sold
nice set of 70 doors with speaker holes 170.00 sold
nice set of rust free 68 fenders sold as a set 160.00 sold
new 68 drivers fender with inner fender for 100.00
ruff 67 pass fender needs cup and has dent in rear of fender 45.00 sold
ruff 67-68 hood has a bow in the center 65.00 sold
pass rear step side fender 50.00
cowl panels with antenna hole 20.00 each
5lug suspension complete 75.00
power steering gear box 67-72 40.00
67 gmc painted grill and core support has rust in core support grill has some small dents 60.00
some cab parts that i can cut up if needed ?
70 chevy emblems / 350 fender emblems 25.00
cell 940-733-8076
prefer not to ship
located 2.5 hrs north west of dallas and 1 hour south of wichita falls

Vintage Windmills · 03-22-2011, 10:40 AM

So you sold the 67 doors? I was still waiting on pics of the lower areas. Didn't see anyone else ask about them.

WILD WILLIE · 03-22-2011, 02:59 PM

Quote:

Originally Posted by Vintage Windmills

So you sold the 67 doors? I was still waiting on pics of the lower areas. Didn't see anyone else ask about them.

Will I have a hard time shipping anything . but this guy purchased from add on craigslist he drove from michigan to get them and some other parts.

Vintage Windmills · 03-22-2011, 05:15 PM

Ok, If you find more good 67 doors I know a couple guys in Austin that may be able to pickup. Thats what i was thinking on these- I agree shipping is not feasible.

Zumo · 04-07-2011, 04:55 PM

What size is this wheel?

teezyboi817 · 04-19-2011, 11:51 PM

Suspension drum or disc pm me please

68lowburb · 04-20-2011, 09:39 PM

happen to be going to pate swap meet ? if so interested in the 67 gmc grille thanks jimmy

chevytruckluver · 04-20-2011, 10:37 PM

new 68 drivers fender with inner fender for 100.00
is this a reproduction set?

03-15-2011, 05:35 PM	#1
WILD WILLIE Registered User Join Date: Jun 2006 Location: OLNEY TEXAS Posts: 325	Cleaning out garage need to move some metal Heres some of what i have for sale nice set of 67 doors with no speaker holes 175.00 nice set of 70 doors with speaker holes 170.00 nice set of rust free 68 fenders sold as a set 160.00 new 68 drivers fender with inner fender for 100.00 ruff 67 pass fender needs cup and has dent in rear of fender 45.00 ruff 67-68 hood has a bow in the center 65.00 pass rear step side fender 50.00 cowl panels with antenna hole 20.00 each 5lug suspension complete 75.00 power steering gear box 67-72 40.00 67 gmc painted grill and core support has rust in core support grill has some small dents 60.00 some cab parts that i can cut up if needed ? 70 chevy emblems / 350 fender emblems 25.00 cell 940-733-8076 prefer not to ship located 2.5 hrs north west of dallas and 1 hour south of wichita falls Attached Images

03-15-2011, 06:42 PM	#2
tow guys Registered User Join Date: Dec 2010 Location: Bayville NJ Posts: 385	Re: Cleaning out garage need to move some metal I'm interested in those fenders if you're willing to ship to zip 08721. Posted via Mobile Device __________________ Check out my 70 GMC tow truck project here.......http://67-72chevytrucks.com/vboard/s...d.php?t=440431 Member of the 1-Ton Club! http://www.eastcoastcarandtruck.org

03-15-2011, 06:58 PM	#3
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Cleaning out garage need to move some metal Can you post some pics of the 67 doors or email to me at jdherrig@yahoo.com? I'm interested in those. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

03-15-2011, 06:59 PM	#4
CORSAIR Registered User Join Date: Dec 2010 Location: Pahrump, Nevada Posts: 451	Re: Cleaning out garage need to move some metal Wouldn't happen to have a 16" x 6.5" 6 lug steel wheel?? Looking for one __________________ "The Can't Family Lives Across The Street"

03-16-2011, 03:38 PM	#12
matt67350 Registered User Join Date: May 2001 Location: Benbrook, TX Posts: 1,060	Re: Cleaning out garage need to move some metal nice set of rust free 68 fenders sold as a set 160.00 Would like to see them first. pm address to me please. thanks, Matthew __________________ 69 swb stepside, rebuild and upgrade in progress Last edited by matt67350; 03-16-2011 at 03:41 PM.

03-16-2011, 05:45 PM	#14
70shortfleet Senior Member Join Date: Apr 2010 Location: St.Peters, MO Posts: 2,239	Re: Cleaning out garage need to move some metal If there are no dents in that right headlight bezel that is hanging there, how much shipped to 63376

03-16-2011, 05:51 PM	#15
Nathans71 Registered User Join Date: Jan 2007 Location: Mt. Washington Kentucky Posts: 97	Re: Cleaning out garage need to move some metal Looking for a good glove box hinge, working spring. 40047. Thanks

03-22-2011, 10:13 AM	#16
WILD WILLIE Registered User Join Date: Jun 2006 Location: OLNEY TEXAS Posts: 325	Re: Cleaning out garage need to move some metal I HAVE SOLD ALOT OF ITEMS I HAVE 3 PASS SIDE DOORS LEFT 50.00 EACH YOUR CHOICE AND THE REST OF WHAT I HAVE LEFT IS BELOW. Join Date: Jun 2006 Location: OLNEY TEXAS Posts: 294 Cleaning out garage need to move some metal -------------------------------------------------------------------------------- Heres some of what i have for sale nice set of 67 doors with no speaker holes 175.00 sold nice set of 70 doors with speaker holes 170.00 sold nice set of rust free 68 fenders sold as a set 160.00 sold new 68 drivers fender with inner fender for 100.00 ruff 67 pass fender needs cup and has dent in rear of fender 45.00 sold ruff 67-68 hood has a bow in the center 65.00 sold pass rear step side fender 50.00 cowl panels with antenna hole 20.00 each 5lug suspension complete 75.00 power steering gear box 67-72 40.00 67 gmc painted grill and core support has rust in core support grill has some small dents 60.00 some cab parts that i can cut up if needed ? 70 chevy emblems / 350 fender emblems 25.00 cell 940-733-8076 prefer not to ship located 2.5 hrs north west of dallas and 1 hour south of wichita falls

03-22-2011, 10:40 AM	#17
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Cleaning out garage need to move some metal So you sold the 67 doors? I was still waiting on pics of the lower areas. Didn't see anyone else ask about them. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

03-22-2011, 05:15 PM	#19
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Cleaning out garage need to move some metal Ok, If you find more good 67 doors I know a couple guys in Austin that may be able to pickup. Thats what i was thinking on these- I agree shipping is not feasible. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

04-07-2011, 04:55 PM	#20
Zumo Hot Rods For Life Join Date: Sep 2001 Location: Waxahachie, TX Posts: 3,305	Re: Cleaning out garage need to move some metal What size is this wheel? __________________ 1968 C10 LWB **SOLD* Andy Viva Los Bicicletas! Los Muertos Custom Bicycles

04-19-2011, 11:51 PM	#21
teezyboi817 Registered User Join Date: Dec 2008 Location: ft worth texas Posts: 150	Re: Cleaning out garage need to move some metal Suspension drum or disc pm me please __________________ 1968 CHEVY C10 THE NEVER ENDING PROJECT

04-20-2011, 09:39 PM	#22
68lowburb Registered User Join Date: Sep 2006 Location: prairieville, louisiana Posts: 883	Re: Cleaning out garage need to move some metal happen to be going to pate swap meet ? if so interested in the 67 gmc grille thanks jimmy

04-20-2011, 10:37 PM	#23
chevytruckluver Eat, Sleep, Drive a Chevy Join Date: Apr 2010 Location: the town of the cow, Texas Posts: 1,152	Re: Cleaning out garage need to move some metal new 68 drivers fender with inner fender for 100.00 is this a reproduction set? __________________ Trey Silence may be Golden, but Duct Tape is Silver! 72 Short Step 57 "big window" short step



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.