IL Doug Nash DNE2 Overdrive for Th400 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**chevy2tom** · 03-26-2011, 11:05 AM

DNE2 overdrive for th400, unit only no wiring. I have a copy of the owners manual. Can be used for gear spliting or overdrive. It came out of a working 3/4 ton Suburban before I purchaced it, $600.00 obo + shipping or trade for rebuilt v8 tach dash.

**chevy2tom** · 03-27-2011, 09:53 PM

ttt

crushermechanic · 03-31-2011, 01:35 PM

what all does it include? does it have the modules or tail shaft housing? how many miles on it?

**chevy2tom** · 03-31-2011, 04:17 PM

It's the complete unit with part of a drive shaft cut off. There is no module that operates it from what I can see in the owners manual. It looks like a switch, a 12volt relay& wiring.The switch has 2 buttons 1 used to split hi & low for the gear that your in & the other changes it to overdrive. The Suburban body was rotted out so it was stripped of it's big block & drive train.before I bought it so I don't know about the mileage, but I opened the side case drained the fluid & everything looks fine. PM me your email & I'll send pictures.( I'm not sure how to get pictures from my phone to this site) Thank's, Tom
Posted via Mobile Device

**chevy2tom** · 04-01-2011, 09:00 PM

Crusher, pm & pictures sent to your e-mail, Thank's, Tom
Posted via Mobile Device

**va72longhorn** · 04-04-2011, 12:18 PM

If you still have this, can you send me the pics?

**chevy2tom** · 04-04-2011, 01:05 PM

Sure, pm me your e-mail
Posted via Mobile Device

**va72longhorn** · 04-05-2011, 04:22 PM

Pm'ed

**chevy2tom** · 04-05-2011, 04:36 PM

Pictures sent
Posted via Mobile Device

**chevy2tom** · 04-09-2011, 09:39 AM

TTT, make a offer,I need money for other parts!

**va72longhorn** · 04-11-2011, 08:37 AM

what would be your shipping cost to 22720?

texnician01 · 04-11-2011, 08:44 AM

I don't suppose I could get a copy of that owners manual if you still have it?

I have one of these ready to go in my truck but no info on it, and the company is out of business now.

**chevy2tom** · 04-11-2011, 04:41 PM

P.M.'s sent
Posted via Mobile Device

**chevy2tom** · 04-12-2011, 06:26 PM

Longhorn, $75.00 for shipping.
Posted via Mobile Device

**chevy2tom** · 04-14-2011, 08:54 PM

Pictures of the Doug Nash DNE2

**chevy2tom** · 04-17-2011, 12:33 PM

[COLOR="Red"]Sold! to Texnician01 pending payment.

03-26-2011, 11:05 AM	#1
chevy2tom Senior Member Join Date: Aug 2009 Location: Wheeling, Illinois Posts: 703	Doug Nash DNE2 Overdrive for Th400 DNE2 overdrive for th400, unit only no wiring. I have a copy of the owners manual. Can be used for gear spliting or overdrive. It came out of a working 3/4 ton Suburban before I purchaced it, $600.00 obo + shipping or trade for rebuilt v8 tach dash. Last edited by chevy2tom; 03-27-2011 at 09:51 PM. Reason: Willing to trade for part's

03-27-2011, 09:53 PM	#2
chevy2tom Senior Member Join Date: Aug 2009 Location: Wheeling, Illinois Posts: 703	Re: Doug Nash DNE2 Overdrive for Th400 ttt

03-31-2011, 01:35 PM	#3
crushermechanic Registered User Join Date: Dec 2009 Location: Fort Walton Beach, Fl Posts: 361	Re: Doug Nash DNE2 Overdrive for Th400 what all does it include? does it have the modules or tail shaft housing? how many miles on it?

03-31-2011, 04:17 PM	#4
chevy2tom Senior Member Join Date: Aug 2009 Location: Wheeling, Illinois Posts: 703	Re: Doug Nash DNE2 Overdrive for Th400 It's the complete unit with part of a drive shaft cut off. There is no module that operates it from what I can see in the owners manual. It looks like a switch, a 12volt relay& wiring.The switch has 2 buttons 1 used to split hi & low for the gear that your in & the other changes it to overdrive. The Suburban body was rotted out so it was stripped of it's big block & drive train.before I bought it so I don't know about the mileage, but I opened the side case drained the fluid & everything looks fine. PM me your email & I'll send pictures.( I'm not sure how to get pictures from my phone to this site) Thank's, Tom Posted via Mobile Device

04-01-2011, 09:00 PM	#5
chevy2tom Senior Member Join Date: Aug 2009 Location: Wheeling, Illinois Posts: 703	Re: Doug Nash DNE2 Overdrive for Th400 Crusher, pm & pictures sent to your e-mail, Thank's, Tom Posted via Mobile Device

04-04-2011, 12:18 PM	#6
va72longhorn Senior Member Join Date: Dec 2009 Location: Culpeper, VA Posts: 435	Re: Doug Nash DNE2 Overdrive for Th400 If you still have this, can you send me the pics?

04-04-2011, 01:05 PM	#7
chevy2tom Senior Member Join Date: Aug 2009 Location: Wheeling, Illinois Posts: 703	Re: Doug Nash DNE2 Overdrive for Th400 Sure, pm me your e-mail Posted via Mobile Device

04-05-2011, 04:22 PM	#8
va72longhorn Senior Member Join Date: Dec 2009 Location: Culpeper, VA Posts: 435	Re: Doug Nash DNE2 Overdrive for Th400 Pm'ed

04-05-2011, 04:36 PM	#9
chevy2tom Senior Member Join Date: Aug 2009 Location: Wheeling, Illinois Posts: 703	Re: Doug Nash DNE2 Overdrive for Th400 Pictures sent Posted via Mobile Device

04-09-2011, 09:39 AM	#10
chevy2tom Senior Member Join Date: Aug 2009 Location: Wheeling, Illinois Posts: 703	Re: Doug Nash DNE2 Overdrive for Th400 TTT, make a offer,I need money for other parts!

04-11-2011, 08:37 AM	#11
va72longhorn Senior Member Join Date: Dec 2009 Location: Culpeper, VA Posts: 435	Re: Doug Nash DNE2 Overdrive for Th400 what would be your shipping cost to 22720?

04-11-2011, 08:44 AM	#12
texnician01 Senior Member Join Date: Mar 2002 Location: 12 Miles South of Des Moines, Iowa Posts: 359	Re: Doug Nash DNE2 Overdrive for Th400 I don't suppose I could get a copy of that owners manual if you still have it? I have one of these ready to go in my truck but no info on it, and the company is out of business now. __________________ 69 C-10, 340HP 327 55 chevy 4 door 150 47 Willys CJ-2A 05 Harley Night Train 06 1200 Sportster (Wife's bike) 70 Honda CL350 OIF2 & OIF7 Veteran Nathan & Tiffany

04-11-2011, 04:41 PM	#13
chevy2tom Senior Member Join Date: Aug 2009 Location: Wheeling, Illinois Posts: 703	Re: Doug Nash DNE2 Overdrive for Th400 P.M.'s sent Posted via Mobile Device

04-12-2011, 06:26 PM	#14
chevy2tom Senior Member Join Date: Aug 2009 Location: Wheeling, Illinois Posts: 703	Re: Doug Nash DNE2 Overdrive for Th400 Longhorn, $75.00 for shipping. Posted via Mobile Device

04-14-2011, 08:54 PM	#15
chevy2tom Senior Member Join Date: Aug 2009 Location: Wheeling, Illinois Posts: 703	Re: Doug Nash DNE2 Overdrive for Th400 Pictures of the Doug Nash DNE2 Attached Images



Register or Log In To remove these advertisements.

04-17-2011, 12:33 PM	#16
chevy2tom Senior Member Join Date: Aug 2009 Location: Wheeling, Illinois Posts: 703	Re: Doug Nash DNE2 Overdrive for Th400 [COLOR="Red"]Sold! to Texnician01 pending payment.

Register or Log In To remove these advertisements.