KS new thread SPRING 2011 alot OF 67-72 PARTS - Page 14 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Fesser · 04-02-2011, 11:21 AM

I'll take it. Let me know if you stumble across a matching radio knob. Frank

teeitup · 04-09-2011, 10:42 PM

tttt

**DeadheadNM** · 04-09-2011, 11:39 PM

Randy, looking for the following:

AC bracket stud(s) enough for one truck w 350
Oil filler tube
Ashtray ball bearing type
Alternator bracket for 72
Kick panel vacuum actuator spring and linkage

Thanks, Pete

Lugnut64052 · 04-10-2011, 12:29 AM

Hey Randy,

I only need a couple of things......I'm re-posting a couple of your pictures with items circled. I need two of each of you still have them.

Thanks

**DeadheadNM** · 04-10-2011, 08:12 AM

After my post I saw your newly listed 71 Cheyenne parts truck and got the oil filler tube and AC bracket from it. Could still use the other parts. Thanks.

teeitup · 04-10-2011, 08:48 AM

DeadheadNm, Pete, I should have the AC stud, and ball bearing ash tray. No kick panel vac spring right now.

Lugnut, I should have those I'll look today

Thanks Randy

gm71jimmy · 04-10-2011, 05:45 PM

Quote:

Originally Posted by teeitup

11111111111v
GMC grills, driver quality $30 each plus ship

Looking for a 69-70 GMC top grille bar. The one on the grille to the far left in picture. Would you sale just the bar? What shape is it in. Any bends or rust rot? condition of chrome i dont care about just need one that is stright and rust/dent free as possible. thanks

Rongway68 · 04-10-2011, 09:52 PM

Any Big Block motor stands? Thanks Ron

teeitup · 04-10-2011, 10:52 PM

gm71jimmy, I think I have one good top bar, I'll try to get pics Mon

Rongway68, sorry none right now

Thanks Randy

gm71jimmy · 04-11-2011, 05:02 PM

Quote:

Originally Posted by teeitup

gm71jimmy, I think I have one good top bar, I'll try to get pics Mon

Rongway68, sorry none right now

Thanks Randy

Sounds good. Thank you

teeitup · 04-11-2011, 05:04 PM

I just went out and looked all are driver quality, all have some dings in them, sorry. Thanks Randy

gm71jimmy · 04-11-2011, 05:06 PM

Quote:

Originally Posted by teeitup

I just went out and looked all are driver quality, all have some dings in them, sorry. Thanks Randy

A few dings are ok. Sending pm thanks

dan s · 04-11-2011, 05:48 PM

Hello Randy,I need a few small parts. Steering column bracket(post#1) steering column cover (post#7) They are pictured together on (post #245) I would also like the best remaining cargo light(post#16) no pics needed just send me your payment info and total cost. Thanks Dan.

teeitup · 04-11-2011, 08:11 PM

gm71jimmy, I'll check out the left one

DanS, I'll get you a total here in a bit

Thanks Randy

**DeadheadNM** · 04-11-2011, 08:28 PM

When the dust settles PM my list of loot and payment details. No rush. Thank you!

teeitup · 04-11-2011, 08:35 PM

Pete, sure will, I posted some pics of antenna on other thread. I'll also have pics of your other stuff on there too. Thanks Randy

teeitup · 04-11-2011, 08:39 PM

lugnut pics for you

teeitup · 04-11-2011, 09:06 PM

gm71jimmy, has a few spots of bubbling and a couple ping dents

gm71jimmy · 04-11-2011, 09:36 PM

Quote:

Originally Posted by teeitup

gm71jimmy, has a few spots of bubbling and a couple ping dents

How are the ends and does it look stright along the edge where the hood meets it. Any heavy rust? just want to make sure it is better than the ones i have. How much for it. Thanks

teeitup · 04-11-2011, 09:54 PM

ends are good, these 2 area are only bad spots I see on outside. No heavy rust, just the bubbling spots. $25 plus shipping. Thanks Randy

gm71jimmy · 04-11-2011, 10:16 PM

Quote:

Originally Posted by teeitup

ends are good, these 2 area are only bad spots I see on outside. No heavy rust, just the bubbling spots. $25 plus shipping. Thanks Randy

Thank you Randy I will take it shipped to Overton NV 89040 let me know total when you get a chance and i can paypal you. Thanks

teeitup · 04-11-2011, 11:20 PM

It will be Wed before I get time to tear it apart and get a quote. THANKS Randy

gm71jimmy · 04-11-2011, 11:53 PM

No problem. Just let me know and i will send you some money. Thanks

Lugnut64052 · 04-12-2011, 01:45 PM

Quote:

Originally Posted by teeitup

lugnut pics for you

Yeah, that'll work. Lemme know how much and we'll get 'er Paypalled to ya.

Thanks much.

jtlauer · 04-12-2011, 02:32 PM

If you still have the 69 front bumper brackets, I'll take them shipped to 44087. Also would like a set of black 69 armrests if they are not cracked/split etc.
Thanks, Joel

04-02-2011, 11:21 AM	#326
Fesser Registered User Join Date: Feb 2010 Location: Napa, CA Posts: 519	Re: new thread SPRING 2011 alot OF 67-72 PARTS I'll take it. Let me know if you stumble across a matching radio knob. Frank

04-09-2011, 10:42 PM	#327
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: new thread SPRING 2011 alot OF 67-72 PARTS tttt __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-09-2011, 11:39 PM	#328
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,446	Re: new thread SPRING 2011 alot OF 67-72 PARTS Randy, looking for the following: AC bracket stud(s) enough for one truck w 350 Oil filler tube Ashtray ball bearing type Alternator bracket for 72 Kick panel vacuum actuator spring and linkage Thanks, Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

04-10-2011, 12:29 AM	#329
Lugnut64052 Middle-aged Curmudgeon Join Date: Jun 2008 Location: Independence, MO Posts: 753	Re: new thread SPRING 2011 alot OF 67-72 PARTS Hey Randy, I only need a couple of things......I'm re-posting a couple of your pictures with items circled. I need two of each of you still have them. Thanks Attached Images __________________ Bret Check out the site's Truck Tech FAQ. Be a site supporter. My more-or-less pathetic build thread. Board members I've met: ------------------------------ Longhorn Man Dieselwrencher jholley big mike71

04-10-2011, 08:12 AM	#330
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,446	Re: new thread SPRING 2011 alot OF 67-72 PARTS After my post I saw your newly listed 71 Cheyenne parts truck and got the oil filler tube and AC bracket from it. Could still use the other parts. Thanks. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

04-10-2011, 08:48 AM	#331
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: new thread SPRING 2011 alot OF 67-72 PARTS DeadheadNm, Pete, I should have the AC stud, and ball bearing ash tray. No kick panel vac spring right now. Lugnut, I should have those I'll look today Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-10-2011, 09:52 PM	#333
Rongway68 Registered User Join Date: Feb 2011 Location: San Leon,Tx Posts: 55	Re: new thread SPRING 2011 alot OF 67-72 PARTS Any Big Block motor stands? Thanks Ron

04-10-2011, 10:52 PM	#334
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: new thread SPRING 2011 alot OF 67-72 PARTS gm71jimmy, I think I have one good top bar, I'll try to get pics Mon Rongway68, sorry none right now Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-11-2011, 05:04 PM	#336
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: new thread SPRING 2011 alot OF 67-72 PARTS I just went out and looked all are driver quality, all have some dings in them, sorry. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-11-2011, 05:48 PM	#338
dan s Registered User Join Date: Jan 2010 Location: Ormond Beach Florida Posts: 156	Re: new thread SPRING 2011 alot OF 67-72 PARTS Hello Randy,I need a few small parts. Steering column bracket(post#1) steering column cover (post#7) They are pictured together on (post #245) I would also like the best remaining cargo light(post#16) no pics needed just send me your payment info and total cost. Thanks Dan.

04-11-2011, 08:11 PM	#339
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: new thread SPRING 2011 alot OF 67-72 PARTS gm71jimmy, I'll check out the left one DanS, I'll get you a total here in a bit Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-11-2011, 08:28 PM	#340
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,446	Re: new thread SPRING 2011 alot OF 67-72 PARTS When the dust settles PM my list of loot and payment details. No rush. Thank you! __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

04-11-2011, 08:35 PM	#341
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: new thread SPRING 2011 alot OF 67-72 PARTS Pete, sure will, I posted some pics of antenna on other thread. I'll also have pics of your other stuff on there too. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-11-2011, 08:39 PM	#342
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: new thread SPRING 2011 alot OF 67-72 PARTS lugnut pics for you Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-11-2011, 09:06 PM	#343
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: new thread SPRING 2011 alot OF 67-72 PARTS gm71jimmy, has a few spots of bubbling and a couple ping dents Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

04-11-2011, 09:54 PM	#345
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: new thread SPRING 2011 alot OF 67-72 PARTS ends are good, these 2 area are only bad spots I see on outside. No heavy rust, just the bubbling spots. $25 plus shipping. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-11-2011, 11:20 PM	#347
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: new thread SPRING 2011 alot OF 67-72 PARTS It will be Wed before I get time to tear it apart and get a quote. THANKS Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 04-11-2011 at 11:20 PM.

04-11-2011, 11:53 PM	#348
gm71jimmy 71 Jimmy under construction Join Date: Apr 2010 Location: Overton nv Posts: 380	Re: new thread SPRING 2011 alot OF 67-72 PARTS No problem. Just let me know and i will send you some money. Thanks __________________ 71 cheyenne 20 lwb 2x4 (daily driver) 72 Jimmy 4x4 drivable project 72 GMC truck 3/4 4x4 lwb (parted for jimmy) 63 Nova ss project

04-12-2011, 02:32 PM	#350
jtlauer New Member Join Date: Mar 2006 Location: Parma, Ohio Posts: 55	Re: new thread SPRING 2011 alot OF 67-72 PARTS If you still have the 69 front bumper brackets, I'll take them shipped to 44087. Also would like a set of black 69 armrests if they are not cracked/split etc. Thanks, Joel

Register or Log In To remove these advertisements.