The Blue Goose - Page 56 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

oldblue1968chevy · 04-02-2011, 05:31 PM

And I started to restore the tach dash ive got...

VA72C10 · 04-02-2011, 10:30 PM

lookin forward to some pics!!!

oldblue1968chevy · 04-02-2011, 11:09 PM

when i get home and done donig last minute english HW papers ahha

oldblue1968chevy · 04-03-2011, 10:14 AM

Picture out the window this morning,going to let it bake in the 70* temps this morning,heck the bed looks better than the front half of the truck!

On the tach dash setup,the volts/temp circuit board sort of torn, ima get a pic, is it fixable?

Thanks!

*87 chevy silverado* · 04-03-2011, 10:38 AM

closer pic of the truck?

Hubscrub · 04-03-2011, 03:26 PM

Quote:

Originally Posted by 87 chevy silverado

closer pic of the truck?

yea, walk down the sidewalk and snap a pic or are you grounded for sparying the paint in his garage while your dad is gone

lil hoodlum · 04-03-2011, 05:56 PM

Congratulations on getting your truck back to one color!!

Great color by the way!!

Keep up the hard work!

Keith

VA72C10 · 04-03-2011, 07:09 PM

Looks good for a 250 foot paint job

get us some closer pics

oldblue1968chevy · 04-03-2011, 10:38 PM

he told me not to do it again and laughed pretty good when he walked in and I was sitting in a chair spraypainting lol

these pictures were taken when it was still wet/tacky..

usmcchevy · 04-03-2011, 10:42 PM

Quote:

Originally Posted by oldblue1968chevy

these pictures were taken when it was still wet/tacky..

I don't see any pics

VA72C10 · 04-03-2011, 10:48 PM

on the printed circuit....it's best to get a new one....

it could be fixed but likely will have an issue somewhere else

oldblue1968chevy · 04-03-2011, 10:53 PM

pictures!

bath with scotch brite green pad 400 grit and a quickie spray job in the garage, what a saturday lol

oldblue1968chevy · 04-03-2011, 10:55 PM

gonna put my real chevy (GM) tailgate on even though its rusted to heck its the semi right color and a heck of a lot stronger than that crappy taiwan gate on there now

oldblue1968chevy · 04-03-2011, 11:18 PM

I'll try to get pictuers..

The tach circuit and any other 7 hole circuit would be the same, right?

So could I save $ by getting another used one? Or are the bolts on that pretty tight too?

VA72C10 · 04-03-2011, 11:37 PM

Quote:

Originally Posted by oldblue1968chevy

I'll try to get pictuers..

The tach circuit and any other 7 hole circuit would be the same, right?

So could I save $ by getting another used one? Or are the bolts on that pretty tight too?

They sometimes come off easily, but many times you'll separate the plastic taking the bolts off...

And most of the time a super nice used goes for as much or more than a new repro....so I'd just get a new one...

oldblue1968chevy · 04-03-2011, 11:43 PM

Yeah, mines separating..

I need: New bezel, lense, printed circuit, spraypaints for rusted metal surfaces.

May repaint the old bezel for now and just buy the circuit the rest can be done in the future lol I just want that tach and guages in my truck lol

i need a under hood wiring harness for 7 hole gauge setup too right?

VA72C10 · 04-03-2011, 11:57 PM

Quote:

Originally Posted by oldblue1968chevy

Yeah, mines separating..

I need: New bezel, lense, printed circuit, spraypaints for rusted metal surfaces.

May repaint the old bezel for now and just buy the circuit the rest can be done in the future lol I just want that tach and guages in my truck lol

i need a under hood wiring harness for 7 hole gauge setup too right?

Yep, need the correct fusebox/ harness.

And the tach harness also.

oldblue1968chevy · 04-04-2011, 06:32 PM

Fusebox too?!?!?!!?

Just the harness under the hood, or under the dash also? (I know i'll need to hook up a vacumn line and a oil pressure line)

Hubscrub · 04-04-2011, 09:33 PM

looks good, maybe just paint the front too?

*87 chevy silverado* · 04-04-2011, 09:51 PM

^^^^ x2

usmcchevy · 04-04-2011, 10:28 PM

Looks good!

matchstick · 04-05-2011, 07:07 AM

There's a wiring diagram on here that shows you where to relocate the pins in your harness so you don't have to change the whole harness out. It's pretty simple to do. We did it to my dads truck.
BTW the truck is looking good. It's good seeing you stay after it like you have.

JasonBird · 04-05-2011, 12:28 PM

nice blue color!

oldblue1968chevy · 04-06-2011, 09:08 PM

Gf helped me clean it up (windex windows and put some OLD rainx i found too) pics later

Got the Front drivers side fender trim on, I have more clips comming my way tomorow or the next day (FINALLY found some at carquest, thanks larry!)

oldblue1968chevy · 04-06-2011, 09:09 PM

Goin cruise in saturday at manchester TN hope to see hubscrub with his truck/wifes truck? There, and I told ATT about it also, (his truck not done but I told him to show)

04-02-2011, 05:31 PM	#1376
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: "Rice Rocket' And I started to restore the tach dash ive got... __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

04-02-2011, 10:30 PM	#1377
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: "Rice Rocket' lookin forward to some pics!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-02-2011, 11:09 PM	#1378
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: "Rice Rocket' when i get home and done donig last minute english HW papers ahha __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

04-03-2011, 10:14 AM	#1379
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: "Rice Rocket' Picture out the window this morning,going to let it bake in the 70* temps this morning,heck the bed looks better than the front half of the truck! On the tach dash setup,the volts/temp circuit board sort of torn, ima get a pic, is it fixable? Thanks! Attached Images __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

04-03-2011, 10:38 AM	#1380
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: "Rice Rocket' closer pic of the truck?

04-03-2011, 05:56 PM	#1382
lil hoodlum Registered User Join Date: Oct 2009 Location: Denton, Texas Posts: 1,735	Re: "Rice Rocket' Congratulations on getting your truck back to one color!! Great color by the way!! Keep up the hard work! Keith

04-03-2011, 07:09 PM	#1383
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: "Rice Rocket' Looks good for a 250 foot paint job get us some closer pics __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-03-2011, 10:38 PM	#1384
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: "Rice Rocket' he told me not to do it again and laughed pretty good when he walked in and I was sitting in a chair spraypainting lol these pictures were taken when it was still wet/tacky.. __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

04-03-2011, 10:48 PM	#1386
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: "Rice Rocket' on the printed circuit....it's best to get a new one.... it could be fixed but likely will have an issue somewhere else __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-03-2011, 10:53 PM	#1387
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: "Rice Rocket' pictures! bath with scotch brite green pad 400 grit and a quickie spray job in the garage, what a saturday lol Attached Images __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

04-03-2011, 10:55 PM	#1388
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: "Rice Rocket' gonna put my real chevy (GM) tailgate on even though its rusted to heck its the semi right color and a heck of a lot stronger than that crappy taiwan gate on there now __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

04-03-2011, 11:18 PM	#1389
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: "Rice Rocket' I'll try to get pictuers.. The tach circuit and any other 7 hole circuit would be the same, right? So could I save $ by getting another used one? Or are the bolts on that pretty tight too? __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

04-03-2011, 11:43 PM	#1391
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: "Rice Rocket' Yeah, mines separating.. I need: New bezel, lense, printed circuit, spraypaints for rusted metal surfaces. May repaint the old bezel for now and just buy the circuit the rest can be done in the future lol I just want that tach and guages in my truck lol i need a under hood wiring harness for 7 hole gauge setup too right? __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

04-04-2011, 06:32 PM	#1393
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: "Rice Rocket' Fusebox too?!?!?!!? Just the harness under the hood, or under the dash also? (I know i'll need to hook up a vacumn line and a oil pressure line) __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

04-04-2011, 09:33 PM	#1394
Hubscrub Cruzin Join Date: Dec 2009 Location: on the road Posts: 2,835	Re: "Rice Rocket' looks good, maybe just paint the front too? __________________ Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14



Register or Log In To remove these advertisements.

04-04-2011, 09:51 PM	#1395
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: "Rice Rocket' ^^^^ x2

04-04-2011, 10:28 PM	#1396
usmcchevy Has more rust than truck... Join Date: Apr 2005 Location: Ivanhoe, MN Posts: 2,421	Re: "Rice Rocket' Looks good! __________________ 1972 Custom/10 SWB, 4.8/4l80e Build thread LSx Swap FAQ index

04-05-2011, 07:07 AM	#1397
matchstick Registered User Join Date: Apr 2009 Location: Crossville, TN Posts: 156	Re: "Rice Rocket' There's a wiring diagram on here that shows you where to relocate the pins in your harness so you don't have to change the whole harness out. It's pretty simple to do. We did it to my dads truck. BTW the truck is looking good. It's good seeing you stay after it like you have.

04-05-2011, 12:28 PM	#1398
JasonBird '67 C-10 LWB Driver Join Date: Dec 2010 Location: Andover, Kansas Posts: 380	Re: "Rice Rocket' nice blue color! __________________ '67 C-10 LWB - My Build Thread '67 C-20 LWB - My Donor/ Parts truck - SOLD! '92 GMC SAFARI VAN - My Parts Go Getter '06 KIA SPORTAGE EX - My Commuter "All of this crap better make a truck!" - my wife Sue. Proud U.S.M.C. Dad!

04-06-2011, 09:08 PM	#1399
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: "Rice Rocket' Gf helped me clean it up (windex windows and put some OLD rainx i found too) pics later Got the Front drivers side fender trim on, I have more clips comming my way tomorow or the next day (FINALLY found some at carquest, thanks larry!) __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

04-06-2011, 09:09 PM	#1400
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: "Rice Rocket' Goin cruise in saturday at manchester TN hope to see hubscrub with his truck/wifes truck? There, and I told ATT about it also, (his truck not done but I told him to show) __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

Register or Log In To remove these advertisements.