![]() |
![]() |
#1 |
Stylin
Join Date: Sep 2001
Location: Tuttle, OK
Posts: 620
|
engine problems
my little ol 305 has probs that suddenly appeared. as in the crankcase breather is soaked in oil to where its leaked into the breather housing and has soaked like half the air filter. also the oil pressure gauge reads 60 no matter what. it also runs rough but i suspect its because of the other 2 problems could anyone help me out here?
__________________
Ive been traveling for some time, with my fishin pole and my bottle of shyne. Most Girls like finished products and just dont understand what a good addiction does for you http://www.paulwall.us/ |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Mar 2003
Posts: 2,500
|
Try a new oil pressure sending unit..........mine was reading low until I changed that.........works great now.
On the oil blowby.......It sounds like it is rebuild time to me but before you do, put in a new PCV valve and make sure it's hose is in good shape. |
![]() |
![]() |
![]() |
#3 |
Stylin
Join Date: Sep 2001
Location: Tuttle, OK
Posts: 620
|
ugh
![]()
__________________
Ive been traveling for some time, with my fishin pole and my bottle of shyne. Most Girls like finished products and just dont understand what a good addiction does for you http://www.paulwall.us/ |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Mar 2003
Posts: 2,500
|
THIRD?....... man!
That means "new-engine" time I bet. Do the PCV thing and cross your fingers......... I don't know of a easy fix for blowby but I wish I did.......I would make a billion with it! |
![]() |
![]() |
![]() |
#5 |
Stylin
Join Date: Sep 2001
Location: Tuttle, OK
Posts: 620
|
ive yanked n yanked on tryin to get the pcv valve out it doesnt wanna come out any suggestions on that?
__________________
Ive been traveling for some time, with my fishin pole and my bottle of shyne. Most Girls like finished products and just dont understand what a good addiction does for you http://www.paulwall.us/ |
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Mar 2003
Posts: 2,500
|
It should just pop out.
If you have a new one............put a set of vice grips on it. |
![]() |
![]() |
![]() |
#7 |
Stylin
Join Date: Sep 2001
Location: Tuttle, OK
Posts: 620
|
i talked to dad this morning and yea he said ive got a broke ring so
![]() ![]() ![]() ![]()
__________________
Ive been traveling for some time, with my fishin pole and my bottle of shyne. Most Girls like finished products and just dont understand what a good addiction does for you http://www.paulwall.us/ |
![]() |
![]() |
![]() |
#8 |
Robert Olson Transport
![]() Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,288
|
time to get a junkyard 350 and start over
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
![]() |
![]() |
![]() |
Bookmarks |
|
|