Not the door panel screws, but what they screw into - The 1947 - Present Chevrolet & GMC Truck Message Board Network

AJLChase · 05-13-2011, 09:52 PM

I just purchased some new door panels for my 67 and it's been awhile since I had taken off the old stock door panels. I didn't realize there were clips with threads within the door where the door panel "screws"are screwed in. I seem to be missing a few of these clips and won't be able to install the panels until I replace them. Any vendors that sell these? I've checked Brothers,GMCPauls and LMC and didn't come acrossed any.

Thanks!

71meangreenc10 · 05-13-2011, 10:05 PM

Quote:

Originally Posted by AJLChase

I just purchased some new door panels for my 67 and it's been awhile since I had taken off the old stock door panels. I didn't realize there were clips with threads within the door where the door panel "screws"are screwed in. I seem to be missing a few of these clips and won't be able to install the panels until I replace them. Any vendors that sell these? I've checked Brothers,GMCPauls and LMC and didn't come acrossed any.

Thanks!

Got mine from Bill Athey, he is on here, pickupman, front royal va or google atheys truck parts...

Smitty

DesertCat · 05-13-2011, 10:32 PM

... or go to an automotive paint supply store, they'll have em.

cdowns · 05-14-2011, 07:58 AM

sometimes hardware stores carry good usable stuff like that//time well spent going in a hardware store and lookin in thier hardware section and get familar with what is available over the counter that you dont need to pay shipping on

**Classic Heartbeat** · 05-14-2011, 09:28 AM

Must not have check our site.
http://www.classicheartbeat.com/nuts_&_bolts1.htm
WES

**'68OrangeSunshine** · 05-14-2011, 09:50 AM

Ace Hardware had 'em.

barryvanhook · 05-14-2011, 01:15 PM

Quote:

Originally Posted by cdowns

sometimes hardware stores carry good usable stuff like that//time well spent going in a hardware store and lookin in thier hardware section and get familar with what is available over the counter that you dont need to pay shipping on

+2

AJLChase · 05-14-2011, 04:10 PM

Quote:

Originally Posted by Classic Heartbeat

Must not have check our site.
http://www.classicheartbeat.com/nuts_&_bolts1.htm
WES

I went the easy route and just bought from Classic Heartbeat. Hope they show up quick, I wanna get these babies in and looking good! Thanks!

68chevyLQ4 · 05-14-2011, 05:03 PM

Cool, Im going to be needing some of these in the near future. I'll support a board vendor and order from classic heartbeat as well.

cdowns · 05-14-2011, 06:11 PM

rather than buying at a local hardware store at about 20cents each people wood rather support the shipping companys??? dont compute

*lakeroadster* · 05-14-2011, 06:48 PM

Guess it's a sign of the times.

TigerDMD · 12-19-2011, 01:15 PM

subscribed

tubbedII · 12-19-2011, 02:21 PM

If you're talking about the bottom 4 screws that hold the panels in place, I used license plate screws from my local Autozone. I found ones with plastic square nuts that fit perfectly in place of the metal ones. On my rig, the screws were rusted in, and I decided to just hit the hole nut out rather than deal with trying to get the screws out. Looks good to me!

**leddzepp** · 12-19-2011, 02:28 PM

As stated, these can be bought at any auto parts store....autozone, oreillys, etc.

black_sheep454 · 12-19-2011, 02:38 PM

Assumeing your talking about the sqaure metal nuts that are pressed in the doors for the 4 bottom screws. The 69 I just finished hade a couple missing so I just took some of those white square plastic license plate pop in clips and snapped in the square holes in the door then ran a tap in them for the screws. I also did this for the armrest.
Posted via Mobile Device

05-13-2011, 09:52 PM	#1
AJLChase Registered User Join Date: May 2009 Location: Lincoln, NE Posts: 322	Not the door panel screws, but what they screw into I just purchased some new door panels for my 67 and it's been awhile since I had taken off the old stock door panels. I didn't realize there were clips with threads within the door where the door panel "screws"are screwed in. I seem to be missing a few of these clips and won't be able to install the panels until I replace them. Any vendors that sell these? I've checked Brothers,GMCPauls and LMC and didn't come acrossed any. Thanks!

05-13-2011, 10:32 PM	#3
DesertCat Registered User Join Date: Mar 2011 Location: Valley of the Sunstroke, Arizona Posts: 1,210	Re: Not the door panel screws, but what they screw into ... or go to an automotive paint supply store, they'll have em. __________________ My build thread - Devastation and Reform http://67-72chevytrucks.com/vboard/s...d.php?t=567131

05-14-2011, 07:58 AM	#4
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Not the door panel screws, but what they screw into sometimes hardware stores carry good usable stuff like that//time well spent going in a hardware store and lookin in thier hardware section and get familar with what is available over the counter that you dont need to pay shipping on __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

05-14-2011, 09:28 AM	#5
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Re: Not the door panel screws, but what they screw into Must not have check our site. http://www.classicheartbeat.com/nuts_&_bolts1.htm WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

05-14-2011, 09:50 AM	#6
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,504	Re: Not the door panel screws, but what they screw into Ace Hardware had 'em. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.

05-14-2011, 05:03 PM	#9
68chevyLQ4 Registered User Join Date: Jan 2011 Location: California Posts: 126	Re: Not the door panel screws, but what they screw into Cool, Im going to be needing some of these in the near future. I'll support a board vendor and order from classic heartbeat as well. __________________ 68 Chevy C-10. swb fleetside. 6.0 4L80E swap. http://67-72chevytrucks.com/vboard/s...d.php?t=460877

05-14-2011, 06:11 PM	#10
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Not the door panel screws, but what they screw into rather than buying at a local hardware store at about 20cents each people wood rather support the shipping companys??? dont compute __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

05-14-2011, 06:48 PM	#11
lakeroadster Account Suspended Join Date: Sep 2009 Location: High Plains of Colorado Posts: 2,485	Re: Not the door panel screws, but what they screw into Guess it's a sign of the times.

12-19-2011, 01:15 PM	#12
TigerDMD Registered User Join Date: Feb 2011 Location: Laurens, SC Posts: 182	Re: Not the door panel screws, but what they screw into subscribed

12-19-2011, 02:21 PM	#13
tubbedII needs more $$$ Join Date: Mar 2004 Location: Sacramento Posts: 1,936	Re: Not the door panel screws, but what they screw into If you're talking about the bottom 4 screws that hold the panels in place, I used license plate screws from my local Autozone. I found ones with plastic square nuts that fit perfectly in place of the metal ones. On my rig, the screws were rusted in, and I decided to just hit the hole nut out rather than deal with trying to get the screws out. Looks good to me! __________________ 1970 2wd Blazer

12-19-2011, 02:28 PM	#14
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: Not the door panel screws, but what they screw into As stated, these can be bought at any auto parts store....autozone, oreillys, etc. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

12-19-2011, 02:38 PM	#15
black_sheep454 Registered User Join Date: May 2011 Location: Lebanon, Mo. Posts: 1,315	Re: Not the door panel screws, but what they screw into Assumeing your talking about the sqaure metal nuts that are pressed in the doors for the 4 bottom screws. The 69 I just finished hade a couple missing so I just took some of those white square plastic license plate pop in clips and snapped in the square holes in the door then ran a tap in them for the screws. I also did this for the armrest. Posted via Mobile Device __________________ 1968 chevy lwb, getting ready to join forces with the 70 gmc 1970 gmc swb, getting ready to be a 68 chevy swb 1971 gmc lwb 2500 2wd Sierra Grande 1988 chevy 1-ton crew cab 2wd waiting for a 12v cummins



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.