KS 68 chevy swb fleet with posi geting parted - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 05-19-2011, 11:54 PM

Its junk sorry

**too much stuff** · 05-20-2011, 12:01 AM

When you have a chance, can you get pics of the rust on the pass fender, driver bedside, and damage on core support?

Knobs are packaged and going out tomorrow...

hwes55 · 05-20-2011, 12:01 AM

I would like those mirror arms and backing plates if you can get them off.

Thanks Wes

Vintage Windmills · 05-20-2011, 12:08 AM

Hey Randy, i like that maroon truck.

2002yanks · 05-20-2011, 12:29 AM

how are the bottoms of the doors? pics? will you ship(greyhound)?really interested in them if they are solid on the bottom. have $$ in paypal thanks!!

70chevyolbetty · 05-20-2011, 12:36 AM

I'll b next in line for posi guts how much?
Posted via Mobile Device

darkhorse970 · 05-20-2011, 04:18 AM

I'm interested in the entire rear end, if it gets to me. I will be up that way in June so I could pick it up then.

teeitup · 05-20-2011, 08:09 AM

Eric, I'll try to get some after work if its not raining.

hwes55, I'll work on them

Jud, it makes a good parts show table

2002yanks, sorry no shipping doors

70chevyolbetty, $300 shipped for posi guts

darkhorse970, $300 for it complete

Thanks Randy

rich67 · 05-20-2011, 08:48 AM

thanx randy will pass. will be seeing you soon.

**DREW67** · 05-20-2011, 09:24 AM

What is the GMC in the back ground Randy?

jay_shy · 05-20-2011, 09:44 AM

Any rear bumper brackets. If so very interested

Jason
Posted via Mobile Device

ZOOMY · 05-20-2011, 12:51 PM

Randy, If you part the '67 in the background, put me first on the list for the pass. fender...........ZOOMY

darkhorse970 · 05-20-2011, 05:33 PM

I will take the rear end. I don't have PayPal, can you pm me an address to send a USPS Money order to?

teeitup · 05-20-2011, 06:00 PM

Rich, no problem. Let me know when your headed this way.

Andrew, Not mine, I'm storing it for member Vintage Windmills

Jason, none on here. I have a 72 coil spring truck coming in that has a sport bumper on it with brackets

Dave, sorry not parting 67 GMC

Darkhorse970, I'll give 70chevyolbetty till morning to reply, if he doesn't its yours. He was 2nd in line and you are third.

Thanks Randy

*taank* · 05-20-2011, 07:17 PM

Coil spring rear? Is the crossmember/ spring mounts ok? Willing to separate?
Posted via Mobile Device
Posted via Mobile Device

**Dieselwrencher** · 05-20-2011, 08:19 PM

Randy has anyone stepped up for the short bed and frame? I have a friend interested.

teeitup · 05-20-2011, 10:26 PM

pics for eric this is area behind wheel, pic is same spot

teeitup · 05-20-2011, 10:28 PM

ddent in lower rear, and is torn a bit and rust in front of wheel well

teeitup · 05-20-2011, 10:31 PM

pass front fender rust in cup

teeitup · 05-20-2011, 10:33 PM

support rust

teeitup · 05-20-2011, 10:35 PM

2 spots on lower lip need straightened

teeitup · 05-20-2011, 10:38 PM

taank, sorry not on this one

Ryan, no one yet, Eric is interested in driver side and I have a local guy thinking on pass side. I tore the bed all apart tonight, fender wells are in good shape, front panel is pretty good, some dings, floor was shot with rust. So I'll give these guy a day to decide then if he is interested still let me know.

Thanks Randy

teeitup · 05-20-2011, 10:39 PM

Guys pass bedside does have one rust spot on inside above wheel well size if almost a dime

*taank* · 05-20-2011, 10:56 PM

Quote:

Originally Posted by teeitup

Guys pass bedside does have one rust spot on inside above wheel well size if almost a dime

Think I sent u a Pm. May have found a local frame.
Posted via Mobile Device

seadonkey · 05-20-2011, 11:18 PM

might be a shot in the dark, but I was wondering if you would happen to have a 16" 6 lug rim by chance. I see you part a lot of trucks and was worth a shot. PM me if you do
thanks
Nick

05-19-2011, 11:54 PM	#26
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 68 chevy swb fleet with posi geting parted Its junk sorry __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-20-2011, 12:01 AM	#27
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,795	Re: 68 chevy swb fleet with posi geting parted When you have a chance, can you get pics of the rust on the pass fender, driver bedside, and damage on core support? Knobs are packaged and going out tomorrow... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-20-2011, 12:01 AM	#28
hwes55 Say hello to my little friend! Join Date: Apr 2010 Location: New Hill, NC Posts: 30	Re: 68 chevy swb fleet with posi geting parted I would like those mirror arms and backing plates if you can get them off. Thanks Wes

05-20-2011, 12:08 AM	#29
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: 68 chevy swb fleet with posi geting parted Hey Randy, i like that maroon truck. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

05-20-2011, 12:29 AM	#30
2002yanks Registered User Join Date: Sep 2010 Location: Auburn NY Posts: 1,470	Re: 68 chevy swb fleet with posi geting parted how are the bottoms of the doors? pics? will you ship(greyhound)?really interested in them if they are solid on the bottom. have $$ in paypal thanks!!

05-20-2011, 12:36 AM	#31
70chevyolbetty Registered User Join Date: May 2011 Location: Sylmar Posts: 59	Re: 68 chevy swb fleet with posi geting parted I'll b next in line for posi guts how much? Posted via Mobile Device

05-20-2011, 04:18 AM	#32
darkhorse970 Registered User Join Date: May 2009 Location: Monroe, LA Posts: 2,104	Re: 68 chevy swb fleet with posi geting parted I'm interested in the entire rear end, if it gets to me. I will be up that way in June so I could pick it up then. __________________ Keith SOLD - 1963 C10 Short Fleet 350/700R4 4/6 drop 1967 GMC Super Custom - Short Fleet COPO concept w/427 BBC T-400 w/Doug Nash overdrive 4/6 Drop, Buddy Buckets, etc... Frame Off (In Progress) I call it "Vulgar Display of Power" 1980 Silverado Original paint 49k Original miles 4/6 drop Check out my build thread here: http://67-72chevytrucks.com/vboard/s...=1#post6209941

05-20-2011, 08:09 AM	#33
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 68 chevy swb fleet with posi geting parted Eric, I'll try to get some after work if its not raining. hwes55, I'll work on them Jud, it makes a good parts show table 2002yanks, sorry no shipping doors 70chevyolbetty, $300 shipped for posi guts darkhorse970, $300 for it complete Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-20-2011, 08:48 AM	#34
rich67 Registered User Join Date: Aug 2009 Location: New Canton, Il Posts: 1,857	Re: 68 chevy swb fleet with posi geting parted thanx randy will pass. will be seeing you soon.

05-20-2011, 09:24 AM	#35
DREW67 Senior Member Join Date: Aug 2001 Location: Kansas City, Mo Posts: 1,031	Re: 68 chevy swb fleet with posi geting parted What is the GMC in the back ground Randy? __________________ DREW67

05-20-2011, 09:44 AM	#36
jay_shy SWB 4X4 CLUB Join Date: Feb 2005 Location: PA Posts: 1,088	Re: 68 chevy swb fleet with posi geting parted Any rear bumper brackets. If so very interested Jason Posted via Mobile Device

05-20-2011, 12:51 PM	#37
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	Re: 68 chevy swb fleet with posi geting parted Randy, If you part the '67 in the background, put me first on the list for the pass. fender...........ZOOMY

05-20-2011, 05:33 PM	#38
darkhorse970 Registered User Join Date: May 2009 Location: Monroe, LA Posts: 2,104	Re: 68 chevy swb fleet with posi geting parted I will take the rear end. I don't have PayPal, can you pm me an address to send a USPS Money order to? __________________ Keith SOLD - 1963 C10 Short Fleet 350/700R4 4/6 drop 1967 GMC Super Custom - Short Fleet COPO concept w/427 BBC T-400 w/Doug Nash overdrive 4/6 Drop, Buddy Buckets, etc... Frame Off (In Progress) I call it "Vulgar Display of Power" 1980 Silverado Original paint 49k Original miles 4/6 drop Check out my build thread here: http://67-72chevytrucks.com/vboard/s...=1#post6209941 Last edited by darkhorse970; 05-20-2011 at 05:33 PM.

05-20-2011, 06:00 PM	#39
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 68 chevy swb fleet with posi geting parted Rich, no problem. Let me know when your headed this way. Andrew, Not mine, I'm storing it for member Vintage Windmills Jason, none on here. I have a 72 coil spring truck coming in that has a sport bumper on it with brackets Dave, sorry not parting 67 GMC Darkhorse970, I'll give 70chevyolbetty till morning to reply, if he doesn't its yours. He was 2nd in line and you are third. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 05-20-2011 at 06:01 PM.

05-20-2011, 07:17 PM	#40
taank Account Suspended Join Date: Mar 2011 Location: hastings mn Posts: 186	Re: 68 chevy swb fleet with posi geting parted Coil spring rear? Is the crossmember/ spring mounts ok? Willing to separate? Posted via Mobile Device Posted via Mobile Device



Register or Log In To remove these advertisements.

05-20-2011, 08:19 PM	#41
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: 68 chevy swb fleet with posi geting parted Randy has anyone stepped up for the short bed and frame? I have a friend interested. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

05-20-2011, 10:26 PM	#42
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 68 chevy swb fleet with posi geting parted pics for eric this is area behind wheel, pic is same spot Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-20-2011, 10:28 PM	#43
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 68 chevy swb fleet with posi geting parted ddent in lower rear, and is torn a bit and rust in front of wheel well Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-20-2011, 10:31 PM	#44
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 68 chevy swb fleet with posi geting parted pass front fender rust in cup Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-20-2011, 10:33 PM	#45
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 68 chevy swb fleet with posi geting parted support rust Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-20-2011, 10:35 PM	#46
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 68 chevy swb fleet with posi geting parted 2 spots on lower lip need straightened Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-20-2011, 10:38 PM	#47
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 68 chevy swb fleet with posi geting parted taank, sorry not on this one Ryan, no one yet, Eric is interested in driver side and I have a local guy thinking on pass side. I tore the bed all apart tonight, fender wells are in good shape, front panel is pretty good, some dings, floor was shot with rust. So I'll give these guy a day to decide then if he is interested still let me know. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-20-2011, 10:39 PM	#48
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 68 chevy swb fleet with posi geting parted Guys pass bedside does have one rust spot on inside above wheel well size if almost a dime __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-20-2011, 11:18 PM	#50
seadonkey Registered User Join Date: Sep 2008 Location: Port Edwards wi Posts: 49	Re: 68 chevy swb fleet with posi geting parted might be a shot in the dark, but I was wondering if you would happen to have a 16" 6 lug rim by chance. I see you part a lot of trucks and was worth a shot. PM me if you do thanks Nick

Register or Log In To remove these advertisements.