My truck After The Drop - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Pardue'sCustoms* · 07-25-2003, 09:57 PM

here is my 77 with 3 drop spindles and 2 inch lower front coils and a flip kit out back

'89Z71 · 07-25-2003, 11:31 PM

Very nice! Some nice chrome rims would bring it all together. Keep up the good work

apstguy · 07-26-2003, 01:10 AM

Looks good!

*Pardue'sCustoms* · 07-26-2003, 03:57 PM

my front is higher then the back but i have not drove it yet

TIMSPEED · 07-27-2003, 12:18 AM

Where are you measuring the front at? If you're measuring the fender lip..the front will be between 1-1.75" higher, when the truck is sitting level...that's just the way the fenders are.

BTW: Looks good

beaterC10 · 07-27-2003, 12:33 AM

What was required to make the Ralleys fit with the 3" spindles?

*Pardue'sCustoms* · 07-27-2003, 08:32 AM

yes mesure from the bottom of the chrome .....

A LOT of granding on the spindles. right above the caliper and below it

Russell · 07-27-2003, 10:53 AM

Nice, I love the truck's new stance!

**N2TRUX** · 07-27-2003, 10:57 AM

It looks better lowered, but the nose does appear to be higher. Cut half a coil off the front springs and smile again...

kevhill85 · 07-27-2003, 01:41 PM

what tire size is that and rim size

07-25-2003, 09:57 PM	#1
Pardue'sCustoms Account Suspended Join Date: Feb 2003 Location: Jonesville NC Posts: 621	My truck After The Drop here is my 77 with 3 drop spindles and 2 inch lower front coils and a flip kit out back Attached Images

07-25-2003, 11:31 PM	#2
'89Z71 Registered User Join Date: Jan 2003 Location: Star Prairie WI Posts: 392	Very nice! Some nice chrome rims would bring it all together. Keep up the good work __________________ '89 GMC Sierra Z71 -"Scream'n Demon" * LOUD PIPES SAVE LIVES * My Truck

07-26-2003, 01:10 AM	#3
apstguy LED King Join Date: Jan 2003 Location: Sacramento, CA Posts: 2,088	Looks good! __________________ Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32

07-27-2003, 12:18 AM	#5
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	Where are you measuring the front at? If you're measuring the fender lip..the front will be between 1-1.75" higher, when the truck is sitting level...that's just the way the fenders are. BTW: Looks good __________________ I have a few cars... See Them Here

07-27-2003, 10:53 AM	#8
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Nice, I love the truck's new stance! __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

07-26-2003, 03:57 PM	#4
Pardue'sCustoms Account Suspended Join Date: Feb 2003 Location: Jonesville NC Posts: 621	my front is higher then the back but i have not drove it yet

07-27-2003, 12:33 AM	#6
beaterC10 Senior Member Join Date: Jul 2003 Location: Indianapolis, IN Posts: 1,277	What was required to make the Ralleys fit with the 3" spindles?

07-27-2003, 08:32 AM	#7
Pardue'sCustoms Account Suspended Join Date: Feb 2003 Location: Jonesville NC Posts: 621	yes mesure from the bottom of the chrome ..... A LOT of granding on the spindles. right above the caliper and below it

07-27-2003, 10:57 AM	#9
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	It looks better lowered, but the nose does appear to be higher. Cut half a coil off the front springs and smile again...

07-27-2003, 01:41 PM	#10
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	what tire size is that and rim size __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.