CPP Axle Recall - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kbro12 · 05-26-2011, 11:07 PM

Just got a letter from CPP stating that there is a chance my conversion axles might be the incorrect length. My problem is I already have them installed and don't want to take them back out to measure. The brake backing plates are removed because I'm going to be running disks. Does anyone have a correct measurement I can reference between the 4 bolt flange on the housing to the axle flange?

gcburdic · 06-05-2011, 07:52 PM

I PM'd vendor CPPJeff about this issue...unfortunately I PM'd him a bad link so he could respond on his own, he did PM me and ask that I post the following...

Please let the users no we had a recall on rear axle conversion axles that were the wrong length.

Please PM member 'CPPJeff' or call CPP and ask for Jeff

ChevLoRay · 06-05-2011, 09:32 PM

I am thinking that someone at CPP should be able to research their shipping records and compare them to their inventory on-hand at the time of shipping. If they keep computerized records, they they should have a pretty good idea about who got the defective merchandise. It may be that data that led them to contact you to let you know about the possibilities.

The ball is in your court. They've done their part to alert you to the issues.

*CPPJEFF* · 06-08-2011, 11:52 AM

I think we got this one all squred away. Thanks for all your patience!

05-26-2011, 11:07 PM	#1
kbro12 Registered User Join Date: Dec 2008 Location: Denver, CO Posts: 15	CPP Axle Recall Just got a letter from CPP stating that there is a chance my conversion axles might be the incorrect length. My problem is I already have them installed and don't want to take them back out to measure. The brake backing plates are removed because I'm going to be running disks. Does anyone have a correct measurement I can reference between the 4 bolt flange on the housing to the axle flange?

06-05-2011, 07:52 PM	#2
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: CPP Axle Recall I PM'd vendor CPPJeff about this issue...unfortunately I PM'd him a bad link so he could respond on his own, he did PM me and ask that I post the following... Please let the users no we had a recall on rear axle conversion axles that were the wrong length. Please PM member 'CPPJeff' or call CPP and ask for Jeff __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present Last edited by gcburdic; 06-05-2011 at 07:53 PM.

06-05-2011, 09:32 PM	#3
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: CPP Axle Recall I am thinking that someone at CPP should be able to research their shipping records and compare them to their inventory on-hand at the time of shipping. If they keep computerized records, they they should have a pretty good idea about who got the defective merchandise. It may be that data that led them to contact you to let you know about the possibilities. The ball is in your court. They've done their part to alert you to the issues. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

06-08-2011, 11:52 AM	#4
CPPJEFF Account Suspended Join Date: Jan 2010 Location: Anaheim California Posts: 713	Re: CPP Axle Recall I think we got this one all squred away. Thanks for all your patience!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.