'71 1/2 ton axles 4 sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Beast388 · 07-27-2003, 10:38 PM

I have a set of '71 1/2 ton axles for sale. They are a D44 and 12 bolt with 3:73 gears. The D44 is open and completely stock, except for the '77 non-flat top knuckles. The 12B has Richmond gears and an Auburn Pro-Series limited slip.

I would like to get $300 for the pair, I have alot more than that in the 12B.

Both of these axles could be freshened up, they are in driveable condition now. I can get pics if needed.

These would be the perfect addition to a pre-71 truck because of the disk brakes, or to you guys with 3:08 gears.

I am willing to drive 150-200 or so miles to meet you if needed. These are located in Clinton, IA 52732. I am willing to strap them to a pallet for shipping, but that is a last resort. I would like to find a local buyer if possible.

Thanks for looking!

Beast388 · 07-28-2003, 02:57 PM

TTT

Make me an offer?

Class of 69 · 07-29-2003, 07:26 PM

What do you mean by freshened up?? Seal leaks? shoes,drums wornout? Ball joints loose? Front shaft u-joints?

Beast388 · 07-30-2003, 09:13 AM

The 12 bolt needs a pinion seal. The area is moist from gear lube but no drips on the driveway. Other than that, maybe a coat of paint.

The Dana 44 will need balljoints, inner axle seals, and brake calipers. Included is the stock steering arm.

Like mentioned above, these axles are in driveable condition but could use a few things to be perfect.

Beast388 · 07-31-2003, 10:37 PM

TTT

BLAZERMAN · 08-03-2003, 07:38 PM

Sent you a PM.

Beast388 · 08-14-2003, 03:22 PM

TTTA

68gmcjon · 08-15-2003, 12:30 AM

would you be willing to sell the 12B by itself? If so how much?

Beast388 · 08-22-2003, 03:38 PM

I would be willing separate the axles if anyone is interested. For the 12bolt only I would take $250. It has the majority of the new parts.

Beast388 · 09-08-2003, 12:57 PM

Make me an offer?

Beast388 · 09-30-2003, 12:51 PM

TTTAA

Beast388 · 10-14-2003, 11:22 AM

TOP

These axles are ready and waiting for anyone interested. I will entertain any offers.

Beast388 · 10-25-2003, 11:42 PM

TTT

Sale pending on the front axle.

Beast388 · 11-10-2003, 04:08 PM

Top again

Anyone need a rear 12 bolt?

Yellow Cheyenne · 11-10-2003, 05:14 PM

Obious assumption is that the 12 bolt is from a 4x4 with leaf springs. Are the leaf spring mounts the same on a 4x4 as a 2wd with rear leaf springs?

Thanks,

Randy

Beast388 · 11-11-2003, 11:11 AM

Nope, the 4wd's and 2wd's have different spacing. This axle has a perch spacing of 40" center to center whereas the 2wd's spacing is 42.5"

You could always cut off the old and weld on new perches.

Beast388 · 11-26-2003, 03:04 PM

To the Top......again.

Yellow Cheyenne · 11-26-2003, 04:48 PM

PM sent

Beast388 · 11-28-2003, 07:52 PM

PM returned.

Beast388 · 12-03-2003, 12:14 PM

Front axle is sold......

Rear LSD & Gears sale pending.....

Thanks to everyone for looking!

Beast388 · 12-08-2003, 12:07 PM

LSD & Gears are sold.:p

Does anyone need a 12 bolt housing or axle shafts? Make offer.

07-27-2003, 10:38 PM	#1
Beast388 Suburbans RULE! Join Date: Jan 2000 Location: Clinton, IA 52732 Posts: 689	'71 1/2 ton axles 4 sale I have a set of '71 1/2 ton axles for sale. They are a D44 and 12 bolt with 3:73 gears. The D44 is open and completely stock, except for the '77 non-flat top knuckles. The 12B has Richmond gears and an Auburn Pro-Series limited slip. I would like to get $300 for the pair, I have alot more than that in the 12B. Both of these axles could be freshened up, they are in driveable condition now. I can get pics if needed. These would be the perfect addition to a pre-71 truck because of the disk brakes, or to you guys with 3:08 gears. I am willing to drive 150-200 or so miles to meet you if needed. These are located in Clinton, IA 52732. I am willing to strap them to a pallet for shipping, but that is a last resort. I would like to find a local buyer if possible. Thanks for looking! __________________ --Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's. Last edited by Beast388; 10-14-2003 at 11:19 AM.

07-28-2003, 02:57 PM	#2
Beast388 Suburbans RULE! Join Date: Jan 2000 Location: Clinton, IA 52732 Posts: 689	TTT Make me an offer? __________________ --Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's.

07-29-2003, 07:26 PM	#3
Class of 69 Registered User Join Date: Mar 2003 Location: Stillwater MN Posts: 1,166	What do you mean by freshened up?? Seal leaks? shoes,drums wornout? Ball joints loose? Front shaft u-joints? __________________ 69 GMC K10 ..some restoration required....still..

07-30-2003, 09:13 AM	#4
Beast388 Suburbans RULE! Join Date: Jan 2000 Location: Clinton, IA 52732 Posts: 689	The 12 bolt needs a pinion seal. The area is moist from gear lube but no drips on the driveway. Other than that, maybe a coat of paint. The Dana 44 will need balljoints, inner axle seals, and brake calipers. Included is the stock steering arm. Like mentioned above, these axles are in driveable condition but could use a few things to be perfect. __________________ --Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's.

07-31-2003, 10:37 PM	#5
Beast388 Suburbans RULE! Join Date: Jan 2000 Location: Clinton, IA 52732 Posts: 689	TTT __________________ --Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's.

08-03-2003, 07:38 PM	#6
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	Sent you a PM. __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

08-14-2003, 03:22 PM	#7
Beast388 Suburbans RULE! Join Date: Jan 2000 Location: Clinton, IA 52732 Posts: 689	TTTA __________________ --Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's.

08-15-2003, 12:30 AM	#8
68gmcjon Got earplugs? Join Date: Mar 2002 Location: Winfield, Kansas Posts: 556	would you be willing to sell the 12B by itself? If so how much? __________________ 1968 GMC Original A/C, bucket seats, PS,PB 396 bored to 402, Dynomax cerama-coat headers, Super 40 Flowmasters, 272/284 Crane cam, Crane gold roller rockers, holley 750 cfm double pumper, Edelbrock Performer RPM intake, HEI ignition, 9.5:compression Alltogether 411HP and 446ft/lbs Dana 60 w/ 3.54 gears Turbo 400 tranny Why would you have anything other than a big block? HAHA

08-22-2003, 03:38 PM	#9
Beast388 Suburbans RULE! Join Date: Jan 2000 Location: Clinton, IA 52732 Posts: 689	I would be willing separate the axles if anyone is interested. For the 12bolt only I would take $250. It has the majority of the new parts. __________________ --Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's.

09-08-2003, 12:57 PM	#10
Beast388 Suburbans RULE! Join Date: Jan 2000 Location: Clinton, IA 52732 Posts: 689	Make me an offer? __________________ --Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's.

09-30-2003, 12:51 PM	#11
Beast388 Suburbans RULE! Join Date: Jan 2000 Location: Clinton, IA 52732 Posts: 689	TTTAA __________________ --Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's.

10-14-2003, 11:22 AM	#12
Beast388 Suburbans RULE! Join Date: Jan 2000 Location: Clinton, IA 52732 Posts: 689	TOP These axles are ready and waiting for anyone interested. I will entertain any offers. __________________ --Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's.

10-25-2003, 11:42 PM	#13
Beast388 Suburbans RULE! Join Date: Jan 2000 Location: Clinton, IA 52732 Posts: 689	TTT Sale pending on the front axle. __________________ --Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's.

11-10-2003, 04:08 PM	#14
Beast388 Suburbans RULE! Join Date: Jan 2000 Location: Clinton, IA 52732 Posts: 689	Top again Anyone need a rear 12 bolt? __________________ --Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's.

11-10-2003, 05:14 PM	#15
Yellow Cheyenne Registered User Join Date: Jun 2001 Location: Eastern Kansas Posts: 488	Obious assumption is that the 12 bolt is from a 4x4 with leaf springs. Are the leaf spring mounts the same on a 4x4 as a 2wd with rear leaf springs? Thanks, Randy __________________ '72 Cheyenne. AC, PS, PB, Rear slider window, tilt. Light yellow (grapefruit yellow according to new sales literature from '72) '56 Chevy short step V-8 (My dad bought it new!!) '70 Olds 442 convertible '70 Olds Rallye 350



Register or Log In To remove these advertisements.

11-11-2003, 11:11 AM	#16
Beast388 Suburbans RULE! Join Date: Jan 2000 Location: Clinton, IA 52732 Posts: 689	Nope, the 4wd's and 2wd's have different spacing. This axle has a perch spacing of 40" center to center whereas the 2wd's spacing is 42.5" You could always cut off the old and weld on new perches. __________________ --Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's.

11-26-2003, 03:04 PM	#17
Beast388 Suburbans RULE! Join Date: Jan 2000 Location: Clinton, IA 52732 Posts: 689	To the Top......again. __________________ --Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's.

11-26-2003, 04:48 PM	#18
Yellow Cheyenne Registered User Join Date: Jun 2001 Location: Eastern Kansas Posts: 488	PM sent __________________ '72 Cheyenne. AC, PS, PB, Rear slider window, tilt. Light yellow (grapefruit yellow according to new sales literature from '72) '56 Chevy short step V-8 (My dad bought it new!!) '70 Olds 442 convertible '70 Olds Rallye 350

11-28-2003, 07:52 PM	#19
Beast388 Suburbans RULE! Join Date: Jan 2000 Location: Clinton, IA 52732 Posts: 689	PM returned. __________________ --Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's.

12-03-2003, 12:14 PM	#20
Beast388 Suburbans RULE! Join Date: Jan 2000 Location: Clinton, IA 52732 Posts: 689	Front axle is sold...... Rear LSD & Gears sale pending..... Thanks to everyone for looking! __________________ --Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's.

12-08-2003, 12:07 PM	#21
Beast388 Suburbans RULE! Join Date: Jan 2000 Location: Clinton, IA 52732 Posts: 689	LSD & Gears are sold.:p Does anyone need a 12 bolt housing or axle shafts? Make offer. __________________ --Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's.

Register or Log In To remove these advertisements.