The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > All 4x4 Tech & Off Roading

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-29-2011, 09:32 PM   #1
Hazieview
Building Dreams out of Dimes!
 
Join Date: May 2005
Location: Bonham, Tx
Posts: 892
I have a question about a 4x4 setup. New to 4x4s

Hey guys I have found a truck I want to buy. I have no clue a bout 4x4s so I was wondering if this setup would be good for my application.

I will be driving at least 1000 miles round trip in this truck at highway speeds. Once I get to my destination I will need the 4 wheel drive to cruise through steep hills and mild terrain at speed lower than 30mph.

The truck will have..
-sb400 (500+ lbs of torque)
-700r4 (overdrive) wired with a "Painless wiring" tranmission kit to run without the electronic controls
-205 Transfer Case
-Dana 44 Front Axle w/disk brakes
-14BFF (14 bolt full floater) with DIY Disk Brake Conversion & Detroit locker.
-4:10 gears
-37" Goodyear MTRs on Allied Racing Beadlock Wheels
-Superlift 4" lift, all new shocks, dual steering stabilizer

What do you guys think? Is this a good setup or do you see something way wrong here?

Thanks guys! Rookie Alert!
__________________
1981 Chevy short/wide.
SB400 350th
Hazieview is offline   Reply With Quote
Old 06-29-2011, 09:35 PM   #2
msgross
Registered User
 
msgross's Avatar
 
Join Date: Jul 2006
Location: Central PA
Posts: 12,201
Re: I have a question about a 4x4 setup. New to 4x4s

wow, sounds like a pretty nice rig...

I'm no pro but it sounds like any basic rig can meet your needs.

1. 37" tires on a dana44 will be ok for average use but if you plan much more you could think about a dana60 front axle.
2. The 700R4 might not handle that much torque unless it's been built for it.
3. what size truck is this on?
__________________
The Garage:
1968 K-10 SWB - "Project Money Pit"
1996 Z-71 - "huntin rig"
1969 C-10 LWB (SOLD) "Project flip that truck or else"
1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie"


My Garage Build "The 1,000 footer"
msgross is offline   Reply With Quote
Old 06-29-2011, 09:41 PM   #3
Hazieview
Building Dreams out of Dimes!
 
Join Date: May 2005
Location: Bonham, Tx
Posts: 892
Re: I have a question about a 4x4 setup. New to 4x4s

It is in a crew cab shortbed K30.

I do have one question though.

He said the gears in the front were not installed but he has them bran new in a box...?

He also said the front driveshaft is not installed???


(It has a 454 in it right now. i'll be isntalling a the sb400 just didn't know if the setup would workout)
__________________
1981 Chevy short/wide.
SB400 350th
Hazieview is offline   Reply With Quote
Old 06-29-2011, 09:42 PM   #4
Hazieview
Building Dreams out of Dimes!
 
Join Date: May 2005
Location: Bonham, Tx
Posts: 892
Re: I have a question about a 4x4 setup. New to 4x4s

Oh and it is a 1973-87 model.
__________________
1981 Chevy short/wide.
SB400 350th
Hazieview is offline   Reply With Quote
Old 06-29-2011, 10:12 PM   #5
msgross
Registered User
 
msgross's Avatar
 
Join Date: Jul 2006
Location: Central PA
Posts: 12,201
Re: I have a question about a 4x4 setup. New to 4x4s

If it's a real K30 then it should have a dana60...

For the price you'll have getting the dana44 reay you might think dana60 instead... a set from a military CUCV will have 4.56 gears and cost you under $1500 for front and rear...

build it right the first time...

why replace the 454?
__________________
The Garage:
1968 K-10 SWB - "Project Money Pit"
1996 Z-71 - "huntin rig"
1969 C-10 LWB (SOLD) "Project flip that truck or else"
1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie"


My Garage Build "The 1,000 footer"
msgross is offline   Reply With Quote
Old 06-29-2011, 11:09 PM   #6
Redcap
Registered User
 
Join Date: May 2010
Location: Lewis County, WA
Posts: 1,523
Re: I have a question about a 4x4 setup. New to 4x4s

A Dana 44 is marginal at best with 37"s. I also wouldn't downgrade the engine (454 to pretty much any smallblock is a downgrade...especially in a 4x4). Sounds like the frontend has the wrong gearset currently, which would account for the front driveshaft not being installed.
Redcap is offline   Reply With Quote
Old 06-29-2011, 11:16 PM   #7
Hazieview
Building Dreams out of Dimes!
 
Join Date: May 2005
Location: Bonham, Tx
Posts: 892
Re: I have a question about a 4x4 setup. New to 4x4s

The 454 is used and he said it had a few problems.

My sb400 still has gobs of torque, is bran new, and already has about $6000 in it.

I plan on parting with the 2wd drive when I'm done and I dont want to part with my sb400 for sure.
__________________
1981 Chevy short/wide.
SB400 350th
Hazieview is offline   Reply With Quote
Old 06-29-2011, 11:21 PM   #8
Hazieview
Building Dreams out of Dimes!
 
Join Date: May 2005
Location: Bonham, Tx
Posts: 892
Re: I have a question about a 4x4 setup. New to 4x4s

I also figured the sb400 would be more practical for what I'm going to use the truck for.

If this truck was going to be used strictly as a toy to go 4 wheeling in it would be a different story.

However this is a truck I will have to use daily as needed to haul stuff, tow trailers, go camping in, as well as travel long distances.

454 just doesn't seem practical in my opinion.
__________________
1981 Chevy short/wide.
SB400 350th
Hazieview is offline   Reply With Quote
Old 06-30-2011, 12:22 AM   #9
Chevy1TonFun
Grease Monkey
 
Chevy1TonFun's Avatar
 
Join Date: Oct 2007
Location: Fresno CA
Posts: 750
Re: I have a question about a 4x4 setup. New to 4x4s

I'd stick with the SBC. Have you bought the truck yet?
__________________
Tow Rig: 2012 Chevy 2500HD CCSB LTZ Z71 4x4 Duramax
Ultimate Offroad Build: 1978 Chevy Silverado K30 Crewcab Build Link http://67-72chevytrucks.com/vboard/s...d.php?t=654053
Mud Truck: 1972 Chevy Cheyenne K30 4x4, 468/400/205, D60/D70HD, 18" Custom Lift, 17x39" IROKs
FOR SALE http://67-72chevytrucks.com/vboard/c...ton-4x4&cat=12
Chevy1TonFun is offline   Reply With Quote
Old 06-30-2011, 01:24 AM   #10
Hazieview
Building Dreams out of Dimes!
 
Join Date: May 2005
Location: Bonham, Tx
Posts: 892
Re: I have a question about a 4x4 setup. New to 4x4s

No I plan on getting it this weekend I just wanted to see what you guys thought about the setup the 4x4 would have on it with my sbc.
__________________
1981 Chevy short/wide.
SB400 350th
Hazieview is offline   Reply With Quote
Old 06-30-2011, 11:24 AM   #11
msgross
Registered User
 
msgross's Avatar
 
Join Date: Jul 2006
Location: Central PA
Posts: 12,201
Re: I have a question about a 4x4 setup. New to 4x4s

I'd trade/sell the 454 then and replace the front axle with a SRW (single rear wheel) dana60 and appropriate parts. Check the gears in the 14 bolt and run it...

should be fun for what you are using it for.
__________________
The Garage:
1968 K-10 SWB - "Project Money Pit"
1996 Z-71 - "huntin rig"
1969 C-10 LWB (SOLD) "Project flip that truck or else"
1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie"


My Garage Build "The 1,000 footer"
msgross is offline   Reply With Quote
Old 06-30-2011, 04:59 PM   #12
Mr. 250r
Registered User
 
Mr. 250r's Avatar
 
Join Date: Dec 2010
Location: freeburg, illinois
Posts: 885
Re: I have a question about a 4x4 setup. New to 4x4s

I ran 38.5s with my 10b front end i eventually broke an axle but that was under very extreme stress all through a stock 350tbi and 4l80e, 4.10s but then i bought a d60 really cheap got the death wobble and no longer drive the suburban but drove the 38s all over the highway/town/coal mine property where we mud and did fine
__________________
1987 Chevy V30 - http://67-72chevytrucks.com/vboard/s...d.php?t=573854
1988 IROC-Z Camaro - 305/T5 T-Top
1989 GMC V35 - Marbolo Express http://67-72chevytrucks.com/vboard/s...d.php?t=596850
1991 V2500 Suburban Silverado - Sold
1991 V2500 Suburban Scottsdale - Big Nasty http://67-72chevytrucks.com/vboard/s...d.php?t=497423
2001 Ram 3500 5.9 H.O NV56 EC DRW - Sold
2003 1500 Silverado
2004 Ram 3500 5.9 H.O NV56 CC DRW - Sold
2005 Silverado 2500HD 6.6/ZF6 CC LWB
Mr. 250r is offline   Reply With Quote
Old 06-30-2011, 11:55 PM   #13
1malo68
Registered User
 
1malo68's Avatar
 
Join Date: Aug 2010
Location: Lost Wages, NV
Posts: 201
Re: I have a question about a 4x4 setup. New to 4x4s

Was this somebody's project truck? msgross is absolutely right about the 700r not being able to handle that type of torque unless it's built. The 700r4 never came stock with a 205 transfer case. They were usually mated to a 208. Do you know this guy? Is it a good price? You can probably figure about $2000.00 to get it the way you want it if the tranny is in good shape. You might as well add that to the price.
1malo68 is offline   Reply With Quote
Old 07-01-2011, 03:58 AM   #14
chevymadness
Registered User
 
Join Date: Aug 2010
Location: el paso texas
Posts: 273
Re: I have a question about a 4x4 setup. New to 4x4s

seems like a sweet bundle to me i would love to have all that under my chevy right about now.I offroad with my truck and take my atv out to the dunes.
__________________
1982 chevy silverado

It's all about original guys original let me say again original.
chevymadness is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:23 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com