Project Family Hauler - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

swamp rat · 06-29-2011, 09:41 PM

Quote:

Originally Posted by pickup67man

Hey swamprat I must have been near your house when I found my gas guage was also having issues. Was at Sprinker at a poker run stop and my engine sputtered. Almost died on Pac Ave. My fuel pressure started jumping and I stopped at the Gas Boy around 166th.

I'm out on 224th so guess you were still not too close.

My truck is bone dry when the needle is just touching the "E"

pickup67man · 07-01-2011, 12:39 AM

Quote:

Originally Posted by swamp rat

I'm out on 224th so guess you were still not too close.

My truck is bone dry when the needle is just touching the "E"

I normally fill up when it gets to 1/8th tank. Mine was still at 1/2. Was watching it not move so I guessed it was empty. After it was full it moved to 3/4 tank. Drove to McKenna then back to Orting and home and it was still on 3/4 tank. Something is broke.

slammed427 · 09-25-2011, 06:07 AM

mmmmm.... suicide doors!!!!

pickup67man · 09-26-2011, 05:18 PM

Some more updates, but not the suburban. Garage getting close.

Lonely looking truck.

pickup67man · 11-28-2011, 12:22 AM

Garage done on outside, just need to finish the inside and move in.

swamp rat · 11-28-2011, 12:49 AM

Sweet! I wish it was mine!!

I need to ask tho and to qualify i am not any kind of construction builder... Houses like mine (built in about 74) have a vent on both ends of the roof peaks to let air into the attic, I don't see that in your garage so just wondering if there is some type of vent to allow air to enter, then vent out the roof vents to let the summer heat escape?

**Dieselwrencher** · 11-28-2011, 01:41 AM

Sweet garage build! Did you insulate it?

pickup67man · 11-28-2011, 04:45 PM

Quote:

Originally Posted by swamp rat

Sweet! I wish it was mine!!

I need to ask tho and to qualify i am not any kind of construction builder... Houses like mine (built in about 74) have a vent on both ends of the roof peaks to let air into the attic, I don't see that in your garage so just wondering if there is some type of vent to allow air to enter, then vent out the roof vents to let the summer heat escape?

The attic has vents in the soffit (some people call it bird blocks). Based on 1 square foot of venting for every 300 square feet of attic floor space. The heat in the attic rises out the roof vents drawing cool air into the attic from the soffit vents (convection). The gable vents you are referring to can actually disrupt the convection of air creating hot spots in the attic. That is what I read.

pickup67man · 11-28-2011, 04:50 PM

Quote:

Originally Posted by Dieselwrencher

Sweet garage build! Did you insulate it?

I will be itchy this weekend. Like it says "just need to finish the inside". Then drywall, tape, paint, cabinets, stereo, tv, fridge, and oh yeah Suburban.
I have enough power in the garage to run my welder and a 220v air compressor, stereo, and plug in my trailer to a 30 amp plug.

**Dieselwrencher** · 11-28-2011, 04:55 PM

Quote:

Originally Posted by pickup67man

I will be itchy this weekend. Like it says "just need to finish the inside". Then drywall, tape, paint, cabinets, stereo, tv, fridge, and oh yeah Suburban.
I have enough power in the garage to run my welder and a 220v air compressor, stereo, and plug in my trailer to a 30 amp plug.

Cool deal. It's all that small stuff that seems to take the longest to get done. I really need to finish insulating the south bay in our shop before it gets too dang cold here. Good luck finishing yours up!

pickup67man · 11-28-2011, 05:18 PM

Quote:

Originally Posted by Dieselwrencher

Cool deal. It's all that small stuff that seems to take the longest to get done. I really need to finish insulating the south bay in our shop before it gets too dang cold here. Good luck finishing yours up!

Yeah I had the roof done a month after the concrete was poured, just working on weekends and after work. It has been 2 1/2 months since then and the outside is done and I have power. I hope inside is done by early January. Too many holiday weekends now to get much done. I need to weld something soon.

swamp rat · 11-28-2011, 07:29 PM

Ok, like i mentioned i don't know squat about that kinda stuff, I have noted some newer houses also omitted that vent so i was wondering whats up, guess that makes sense as heat rises.

I still want your garage!

)

**Dieselwrencher** · 11-28-2011, 08:55 PM

Quote:

Originally Posted by pickup67man

Yeah I had the roof done a month after the concrete was poured, just working on weekends and after work. It has been 2 1/2 months since then and the outside is done and I have power. I hope inside is done by early January. Too many holiday weekends now to get much done. I need to weld something soon.

When we built ours, we got one bay lined with ply wood, got lights in the other bay, insulated it, and moved in. I still need to finish up things here and there. There sure isn't enough time to get it all done!

pickup67man · 11-28-2011, 11:49 PM

Quote:

Originally Posted by swamp rat

Ok, like i mentioned i don't know squat about that kinda stuff, I have noted some newer houses also omitted that vent so i was wondering whats up, guess that makes sense as heat rises.

I still want your garage!

)

Thats ok, this time last year I didn't even have plans for construction. When I stood up the trusses on Labor day weekend I didn't know how much venting I needed. I learned everything as I went. This is my first complete building. I hadn't even framed a complete wall. I have learned a lot this last year on building codes and permits and inspections and setbacks and surveys and electrical and and and and and.

I don't build for a living so this has made me a little crazy and my tools are hard to find.

jbclassix · 11-29-2011, 12:12 AM

looks like a nice home for the burb!!

68 TT · 11-29-2011, 02:18 PM

Nice to see the shop getting close to ready.

pickup67man · 11-29-2011, 11:32 PM

Quote:

Originally Posted by jbclassix

looks like a nice home for the burb!!

It will be a nice home for both trucks. They will both fit.

VA72C10 · 11-29-2011, 11:48 PM

Super nice!!!

68 TT · 01-05-2012, 11:05 PM

Any progress on the shop and / or Hauler?

MrBeast · 01-09-2012, 04:02 AM

Nice build, I'm subscribed

pickup67man · 01-09-2012, 10:13 PM

Ok some new pics.

The contrast between trucks looks good. Got the highs and lows of the chevy fleet. Painting the inside next weekend then I can move in all the cabinets and tools. Maybe I can work on the suburban this year.

VA72C10 · 01-09-2012, 10:53 PM

garage looks great and nice trucks!

MrBeast · 01-10-2012, 08:26 PM

Nice garage.

**Dieselwrencher** · 01-10-2012, 09:12 PM

That garage looks sweet! It even looks better with your trucks in there! Nice job. What size rock did you put in fron of it? 1"?

y5mgisi · 01-10-2012, 09:30 PM

There really needs to be more garage build threads... That seriously looks like alot of fun! Lot of work but lot of fun. I have always wondered, how does a person get the trusses up there? Also, did you build the walls on the ground and then raise them up? What do you figure you have into it now cost wise?

09-25-2011, 06:07 AM	#78
slammed427 Registered User Join Date: Dec 2008 Location: Tempe, Az Posts: 325	Re: Project Family Hauler mmmmm.... suicide doors!!!! __________________ 74 C10 LWB 350/T5 Dropped on 20's Soon to be Bagged and Injected 84 C35 Crew Cab Dually. 454/400 Dropped a lot. Instagram: mmmdropp

09-26-2011, 05:18 PM	#79
pickup67man Registered User Join Date: Jun 2009 Location: Puyallup, WA Posts: 337	Re: Project Family Hauler Some more updates, but not the suburban. Garage getting close. Lonely looking truck. __________________ Travis 2005 K2500 Duramax (hauls the junk home) 1967 Chev C10 (hauls a$$) 1970 Suburban (Yukon XL 4 door) 1968 GMC 3/4 ton (sheetmetal only, chassis gone) 2005 Malibu (wife's car, still a Chevy) Project Family Hauler New Home for Chevys (Moved in and working)

11-28-2011, 12:22 AM	#80
pickup67man Registered User Join Date: Jun 2009 Location: Puyallup, WA Posts: 337	Re: Project Family Hauler Garage done on outside, just need to finish the inside and move in. __________________ Travis 2005 K2500 Duramax (hauls the junk home) 1967 Chev C10 (hauls a$$) 1970 Suburban (Yukon XL 4 door) 1968 GMC 3/4 ton (sheetmetal only, chassis gone) 2005 Malibu (wife's car, still a Chevy) Project Family Hauler New Home for Chevys (Moved in and working)

11-28-2011, 12:49 AM	#81
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Project Family Hauler Sweet! I wish it was mine!! I need to ask tho and to qualify i am not any kind of construction builder... Houses like mine (built in about 74) have a vent on both ends of the roof peaks to let air into the attic, I don't see that in your garage so just wondering if there is some type of vent to allow air to enter, then vent out the roof vents to let the summer heat escape? __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

11-28-2011, 01:41 AM	#82
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Project Family Hauler Sweet garage build! Did you insulate it? __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-28-2011, 07:29 PM	#87
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Project Family Hauler Ok, like i mentioned i don't know squat about that kinda stuff, I have noted some newer houses also omitted that vent so i was wondering whats up, guess that makes sense as heat rises. I still want your garage! ) __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

11-29-2011, 12:12 AM	#90
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: Project Family Hauler looks like a nice home for the burb!! __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

11-29-2011, 02:18 PM	#91
68 TT Still plays with trucks Join Date: Jul 2009 Location: Spokane, WA Posts: 3,556	Re: Project Family Hauler Nice to see the shop getting close to ready. __________________ miSSed opportunity - ground up creation of an AWD 1994 454 SS that never was http://67-72chevytrucks.com/vboard/s...d.php?t=795577 69 C10 shortbed stepside 400 small block - built like what a super sport truck could have been 69 K20 lwb TBI 350 4L60E NP208 14-bolt Dana-44 w/disc 68 Camaro SS / RS 500hp 439 inch roller cam big block 4L80E 79 Malibu TPI 350 4L60 w/ Z28 steering & sway bars

11-29-2011, 11:48 PM	#93
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Project Family Hauler Super nice!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

01-05-2012, 11:05 PM	#94
68 TT Still plays with trucks Join Date: Jul 2009 Location: Spokane, WA Posts: 3,556	Re: Project Family Hauler Any progress on the shop and / or Hauler? __________________ miSSed opportunity - ground up creation of an AWD 1994 454 SS that never was http://67-72chevytrucks.com/vboard/s...d.php?t=795577 69 C10 shortbed stepside 400 small block - built like what a super sport truck could have been 69 K20 lwb TBI 350 4L60E NP208 14-bolt Dana-44 w/disc 68 Camaro SS / RS 500hp 439 inch roller cam big block 4L80E 79 Malibu TPI 350 4L60 w/ Z28 steering & sway bars

01-09-2012, 04:02 AM	#95
MrBeast high-Tech Red Neck Join Date: Feb 2008 Location: Livingston, MT/On my boat WA/BC/AK Posts: 2,294	Re: Project Family Hauler Nice build, I'm subscribed __________________ "He used to be a pretty nice feller, now he's a welder!"

01-09-2012, 10:13 PM	#96
pickup67man Registered User Join Date: Jun 2009 Location: Puyallup, WA Posts: 337	Re: Project Family Hauler Ok some new pics. The contrast between trucks looks good. Got the highs and lows of the chevy fleet. Painting the inside next weekend then I can move in all the cabinets and tools. Maybe I can work on the suburban this year. __________________ Travis 2005 K2500 Duramax (hauls the junk home) 1967 Chev C10 (hauls a$$) 1970 Suburban (Yukon XL 4 door) 1968 GMC 3/4 ton (sheetmetal only, chassis gone) 2005 Malibu (wife's car, still a Chevy) Project Family Hauler New Home for Chevys (Moved in and working)

01-09-2012, 10:53 PM	#97
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Project Family Hauler garage looks great and nice trucks! __________________ Looking for a 67-72 swb or blazer project in or around VA.

01-10-2012, 08:26 PM	#98
MrBeast high-Tech Red Neck Join Date: Feb 2008 Location: Livingston, MT/On my boat WA/BC/AK Posts: 2,294	Re: Project Family Hauler Nice garage. __________________ "He used to be a pretty nice feller, now he's a welder!"

01-10-2012, 09:12 PM	#99
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Project Family Hauler That garage looks sweet! It even looks better with your trucks in there! Nice job. What size rock did you put in fron of it? 1"? __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*



Register or Log In To remove these advertisements.

01-10-2012, 09:30 PM	#100
y5mgisi Second Chance Program Join Date: Jun 2006 Location: Portland, OR Posts: 2,642	Re: Project Family Hauler There really needs to be more garage build threads... That seriously looks like alot of fun! Lot of work but lot of fun. I have always wondered, how does a person get the trusses up there? Also, did you build the walls on the ground and then raise them up? What do you figure you have into it now cost wise?

Register or Log In To remove these advertisements.