Another one "bites the dust"-nice parts for sale. - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**PICKMUP** · 08-04-2003, 02:16 PM

I'm going to guess $150-200 to box and ship a door to Vermont!
If I have one, a good door sells for $200-300 here. I think you whould be better off finding one on the East coast.

VTKidder · 08-05-2003, 05:59 AM

Kinda what I was thinking too...

Thanks again.

VTKidder · 08-05-2003, 05:59 AM

Kinda what I was thinking too...

Thanks again.

bpmcgee · 08-05-2003, 08:30 AM

Pickemup,

I can't tell if this is a 4wd. If it IS, I'm looking for the following parts:

Front sway bar and brackets.

Steering damper to tie rod bracket.

drivers side front upper shock mount.

Thanks,

Brian

**PICKMUP** · 08-05-2003, 11:46 AM

bpm: You need a sway bar from a 73 & newer. You can make them work if you modify the frame mounting points. Ours did not come withone.

**COBALT** · 08-05-2003, 01:06 PM

Any chance of you parting out the bed and not selling it whole? I really need a good bed front (lip is rotten on BOTH my trucks), and decent tubs couldn't hurt either. I may even be interested in taking the bed sides.....

...but then I might as well buy the whole damn bed! The bed front is really the critical piece I need...

**PICKMUP** · 08-05-2003, 01:35 PM

Remember, I have a large selection of new parts & sheet metal here in stock---no extra shipping. I also have some very good used...or buy the whole bed.

Zeus · 08-16-2003, 10:05 PM

Did it have or do you have a good condition vacuum canister? How much? Any pictures? What's shipping like?

BUDDY · 02-22-2004, 12:40 AM

I am wondering if you have a wiper harness. I chopped mine up when I started my re-wire & that's about all I need to get the blazer back on the road. thanks, Buddy

MeannGrumpy · 02-22-2004, 12:51 AM

How much for the exterior cab light and harness with switch,
Sad to see another classic Chevy decomissioned!!!!!!

Wootdog · 02-22-2004, 12:56 AM

to the top or is it still available? Wootdog

Orange70chevy · 02-22-2004, 01:51 AM

How much for the chevy emblem on the hood, the park lights, and the stainless trim around the windsheild and back window. What kind of shape are these parts in. Thanks

bad 71 chevy · 02-22-2004, 03:32 AM

Could you give me a price on a driver front fender and shipping to 81303 thanks

**PICKMUP** · 02-22-2004, 04:40 AM

Sorry, but there isn't anything left, good enough to ship.

The bed w/TG is still available and the price is down to $700.

ACES · 02-22-2004, 04:43 AM

Are you selling engine parts too? If so, any pics of the engine?

**PICKMUP** · 02-22-2004, 04:48 AM

Eng/trans all gone.

Blue Beard · 02-22-2004, 10:03 AM

Looks like you have alot of other trucks in the background....

imdarren · 02-22-2004, 01:11 PM

Hey Frank,
Is this where that new rebuilt tranny I bought from you came from?
Wow! Someone did dig deep for this old thread!

Darren

**PICKMUP** · 02-22-2004, 02:23 PM

Blue Beard: Yup. You need to come down here. Lots of stuff.

Darren: Yup. You neen to get back here too. valve covers?

imdarren · 02-22-2004, 02:58 PM

Yah Frank. The valve covers.
I'm afraid to come up. I always spend too much money!

Do you have a new Rad suppert for the 67? How about a new inner fender for the right side of the 67?
Please PM me with prices.

Thanks!

Darren

ZOOMY · 02-23-2004, 11:46 AM

Frank, I might have to make a long road run to Wa. just for that bed. Maybe I can bring back a load to help pay for the gas............Zoomy

ZOOMY · 02-23-2004, 12:09 PM

Frank, Is the bent frame still under it ? I could "V" the front of it & make a trailer to haul a load back this summer. How about the cab ? My neighbor needs a cab. Does that stepside in the background have a drivers rear fender W/O the cutout ? I looked it up ...2k+ miles......ONE WAY !!.........Thanks.........Zoomy

08-04-2003, 02:16 PM	#26
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	I'm going to guess $150-200 to box and ship a door to Vermont! If I have one, a good door sells for $200-300 here. I think you whould be better off finding one on the East coast. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

08-05-2003, 11:46 AM	#30
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Front sway bar bpm: You need a sway bar from a 73 & newer. You can make them work if you modify the frame mounting points. Ours did not come withone. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

08-05-2003, 01:06 PM	#31
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Any chance of you parting out the bed and not selling it whole? I really need a good bed front (lip is rotten on BOTH my trucks), and decent tubs couldn't hurt either. I may even be interested in taking the bed sides..... ...but then I might as well buy the whole damn bed! The bed front is really the critical piece I need... __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

08-05-2003, 01:35 PM	#32
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Parts Here! Remember, I have a large selection of new parts & sheet metal here in stock---no extra shipping. I also have some very good used...or buy the whole bed. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

08-16-2003, 10:05 PM	#33
Zeus Zeus Join Date: Dec 2002 Location: Dallas, TX Posts: 152	Vacuum Canister Did it have or do you have a good condition vacuum canister? How much? Any pictures? What's shipping like? __________________ jesusventura@hotmail.com

08-05-2003, 05:59 AM	#27
VTKidder Registered User Join Date: May 2003 Location: Vermont Posts: 996	Kinda what I was thinking too... Thanks again.

08-05-2003, 08:30 AM	#29
bpmcgee Registered User Join Date: Mar 2003 Location: Northern Illinois Posts: 2,181	Pickemup, I can't tell if this is a 4wd. If it IS, I'm looking for the following parts: Front sway bar and brackets. Steering damper to tie rod bracket. drivers side front upper shock mount. Thanks, Brian

02-22-2004, 12:40 AM	#34
BUDDY Global warming is a myth Join Date: Apr 2003 Location: Henderson, NV Posts: 208	I am wondering if you have a wiper harness. I chopped mine up when I started my re-wire & that's about all I need to get the blazer back on the road. thanks, Buddy __________________ Henderson, NV 1972 K5 - Lifelong project - Needs Time, Place, Help & Parts!! 1990 K5 with 37's 2003 Discovery SE7 - Wife's

02-22-2004, 12:51 AM	#35
MeannGrumpy Registered User Join Date: Jan 2003 Location: Medicine Hat, Alberta,Canada Posts: 64	Rear Cab light How much for the exterior cab light and harness with switch, Sad to see another classic Chevy decomissioned!!!!!! __________________ 1970 Longhorn, factory air & Cruise,Tach vac 1970 C 20 3/4 4x4 350 with turbo 350 auto,

02-22-2004, 12:56 AM	#36
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,680	Why is such an old post brought back up to the top or is it still available? Wootdog __________________ 1967 C10 Got it back after three years Boy I sure missed Peppy 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT

02-22-2004, 01:51 AM	#37
Orange70chevy Registered User Join Date: Feb 2004 Location: Penelope, Texas Posts: 393	How much for the chevy emblem on the hood, the park lights, and the stainless trim around the windsheild and back window. What kind of shape are these parts in. Thanks

02-22-2004, 03:32 AM	#38
bad 71 chevy Registered User Join Date: Jun 2000 Location: Omaha NE 68122 Posts: 637	Could you give me a price on a driver front fender and shipping to 81303 thanks __________________ 71 Chevy C/10 lwb 350 5 speed nv3500 3.73 rear end 2.5" Front Drop and 4" in the back Edelbrock perfomer rpm manifold Edelbrock 600 cfm carb Headmen headers

02-22-2004, 04:40 AM	#39
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	How did this come back? Sorry, but there isn't anything left, good enough to ship. The bed w/TG is still available and the price is down to $700. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

02-22-2004, 04:43 AM	#40
ACES Life is a gamble Join Date: Oct 2003 Location: Lee's Summit, MO Posts: 796	Are you selling engine parts too? If so, any pics of the engine? __________________ 1970 Orange CST C-10 w/350, posi, Longbed The torpid artist seeks inspiration at any cost, by virtue or by vice, by friend or by fiend, by prayer or by wine. -- Ralph Waldo Emerson

02-22-2004, 04:48 AM	#41
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Gone Eng/trans all gone. __________________ Email: frankeham@comcast.net Phone: 360-956-7170



Register or Log In To remove these advertisements.

02-22-2004, 10:03 AM	#42
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	Looks like you have alot of other trucks in the background.... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

02-22-2004, 01:11 PM	#43
imdarren Registered User Join Date: Oct 2001 Location: SW Washington Posts: 1,006	Hey Frank, Is this where that new rebuilt tranny I bought from you came from? Wow! Someone did dig deep for this old thread! Darren __________________ Washington State 1967 Chevy C10 LWB Rodstoration In Progress. 1972 K20 Cheyenne Super

02-22-2004, 02:23 PM	#44
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Yup! Blue Beard: Yup. You need to come down here. Lots of stuff. Darren: Yup. You neen to get back here too. valve covers? __________________ Email: frankeham@comcast.net Phone: 360-956-7170

02-22-2004, 02:58 PM	#45
imdarren Registered User Join Date: Oct 2001 Location: SW Washington Posts: 1,006	Yah Frank. The valve covers. I'm afraid to come up. I always spend too much money! Do you have a new Rad suppert for the 67? How about a new inner fender for the right side of the 67? Please PM me with prices. Thanks! Darren __________________ Washington State 1967 Chevy C10 LWB Rodstoration In Progress. 1972 K20 Cheyenne Super

02-23-2004, 11:46 AM	#46
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	LOOOONG Road Run Frank, I might have to make a long road run to Wa. just for that bed. Maybe I can bring back a load to help pay for the gas............Zoomy

02-23-2004, 12:09 PM	#47
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	frame Frank, Is the bent frame still under it ? I could "V" the front of it & make a trailer to haul a load back this summer. How about the cab ? My neighbor needs a cab. Does that stepside in the background have a drivers rear fender W/O the cutout ? I looked it up ...2k+ miles......ONE WAY !!.........Thanks.........Zoomy

Register or Log In To remove these advertisements.