Bonehead - The 1947 - Present Chevrolet & GMC Truck Message Board Network

robby · 08-02-2003, 11:49 PM

Remind me please. What years had a 205 transfer case and what had a 203? I have two 72 K10s what do I have? Also while I have you-what is the difference between a sm465 and a sm 435? Also what does the SM stand for? How many licks does it take to get to the center of a tootsie roll tootsie pop? What is your favorite color?

teeitup · 08-03-2003, 12:17 AM

465 licks to the center!!!!!!!

White is my favorite on a truck!!!!

205 in your 72's. sm465's reverse is down to the right and sm420's is to you and down. Thats all I know, I think!!!!!

DrMaserati · 08-03-2003, 03:46 AM

The NP203 didn't come along until 1973. All 1972s should have come equipped with an NP205. But with GM it seems nothing is 100% etched in stone, and a few strange things made it off the assembly lines. Although it's highly unlikely, I suppose the possibility exists that a few 72s could have ended up with the Rockwell case like a 1970 I once owned.

JP

1969 GMC · 08-03-2003, 01:27 PM

wait...do you mean NP435, not SM435? The NP (New Process) transmission was apparently optional on our trucks. I believe boardmember VTKidder has one in his truck. This is what other truck makers of the time used, as I think (dont hold me to this) that it has a granny low like the SM465.

Also, I would like to know what SM stands for. Saginaw-Muncie

robby · 08-03-2003, 06:23 PM

not sure about the NP 435 I just remember it from a post. I think I have the SM (whatever that stands for) 465 in my 72s.

stlaser · 08-03-2003, 08:51 PM

All NP205's have a small 3 bolt cover on the rear of the case right next to the rear drive shaft. NP203's do not have this cover

**JIMs70GMC** · 08-04-2003, 07:17 AM

Afew NP435 were in 2wd trucks, in 4wd fords. The np203 was from 73-78. The dana 20 was found in K5s w/ a straight six and manual tranny only or something like that. White, and 3.

robby · 08-04-2003, 11:54 PM

O.K. great, now how about what SM stands for. A lot of you have more brains than me.

08-02-2003, 11:49 PM	#1
robby Semper Fidelis Join Date: Dec 2001 Location: Cedar City, Utah Posts: 654	Bonehead Remind me please. What years had a 205 transfer case and what had a 203? I have two 72 K10s what do I have? Also while I have you-what is the difference between a sm465 and a sm 435? Also what does the SM stand for? How many licks does it take to get to the center of a tootsie roll tootsie pop? What is your favorite color? __________________ 72 Chevy C 20 with 402 For sale 85 GMC K2500 83 Trans Am Cedar City, Utah (Missouri Native)

08-03-2003, 12:17 AM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	465 licks to the center!!!!!!! White is my favorite on a truck!!!! 205 in your 72's. sm465's reverse is down to the right and sm420's is to you and down. Thats all I know, I think!!!!! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-03-2003, 03:46 AM	#3
DrMaserati Village Curmudgeon Join Date: May 2003 Location: Salem, OR Posts: 75	The NP203 didn't come along until 1973. All 1972s should have come equipped with an NP205. But with GM it seems nothing is 100% etched in stone, and a few strange things made it off the assembly lines. Although it's highly unlikely, I suppose the possibility exists that a few 72s could have ended up with the Rockwell case like a 1970 I once owned. JP __________________ 78 Chevy K30 duallie, 454, TH400 78 IH Scout II, 4X4, 345, 727TF 76 IH Scout II, 4X4, 345, 727TF 65 IH 1200C pickup, 4X4, 345, 4 spd 48 IH KB-8-F, RD-450, 5 spd, 35,000 GVW (a REAL truck) "Life is too short to drink cheap beer." Harry S. Truman

08-03-2003, 01:27 PM	#4
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	wait...do you mean NP435, not SM435? The NP (New Process) transmission was apparently optional on our trucks. I believe boardmember VTKidder has one in his truck. This is what other truck makers of the time used, as I think (dont hold me to this) that it has a granny low like the SM465. Also, I would like to know what SM stands for. Saginaw-Muncie __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

08-03-2003, 06:23 PM	#5
robby Semper Fidelis Join Date: Dec 2001 Location: Cedar City, Utah Posts: 654	not sure about the NP 435 I just remember it from a post. I think I have the SM (whatever that stands for) 465 in my 72s. __________________ 72 Chevy C 20 with 402 For sale 85 GMC K2500 83 Trans Am Cedar City, Utah (Missouri Native)

08-03-2003, 08:51 PM	#6
stlaser Fabricator Join Date: Mar 2003 Location: Indiana Posts: 156	All NP205's have a small 3 bolt cover on the rear of the case right next to the rear drive shaft. NP203's do not have this cover __________________ 84 C30 Chassis 60 & 14, 454/400/NP205 Retroing 98 X-tended Cab Built with the blood and sweat from the hands of a Chevy man.

08-04-2003, 07:17 AM	#7
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Afew NP435 were in 2wd trucks, in 4wd fords. The np203 was from 73-78. The dana 20 was found in K5s w/ a straight six and manual tranny only or something like that. White, and 3. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

08-04-2003, 11:54 PM	#8
robby Semper Fidelis Join Date: Dec 2001 Location: Cedar City, Utah Posts: 654	O.K. great, now how about what SM stands for. A lot of you have more brains than me. __________________ 72 Chevy C 20 with 402 For sale 85 GMC K2500 83 Trans Am Cedar City, Utah (Missouri Native)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.