O T Head Problem ????? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dandeluxe · 08-05-2003, 12:00 AM

MY 350 SMALL BLOCK BIT THE DUST IT DID THE SAME THING ZUMOS DID IT DROPPED A VALVE AND I NEED A SET OF HEADS NOW . ANYBODY KNOW WHERE I CAN GET A SET OF HEADS W/ O PAYING AN ARM AND A LEG THE ONES ON MY TRUCK WERE 68 - 76 LOW COMPRESSION HEADS NO. 3998993. ANY HELP AT ALL IS GREATLY APPRECIATED. I HAVE GOT GET MY TRUCK BACK ON THE ROAD BEFORE I LOSE MY MIND. HELP!!!!!
THANKS, IN ADVANCE . DAN

shadetree · 08-05-2003, 01:49 AM

Small blocks are like belly buttons, everybody has one. Seriously, any wrecking yard should have several sets lying around. Any machine shop should have some, rebuilt, no less, and reasonable. Ebay has many listed, ect ect. good luck

Hooter · 08-05-2003, 01:53 AM

whats with everyone dropping valves? I just did that on Saturday on the old 300-6 Ford!

ramblinredneck · 08-05-2003, 05:18 AM

I'll be in st.louis this friday and saturday and i've got a couple of sets of small block heads they are 624 and 441 casting numbers. the 624 set have been run, but they look clean. the 441 set have been reworked with manley stainless valves and mild porting. both sets have 1.94/1.5 valves. $75 for the used set or $250.00 for the reworked set. Let me know and I will bring them with me for you to look at.

08-05-2003, 12:00 AM	#1
Dandeluxe Senior Member Join Date: Nov 2001 Location: st.louis mo. Posts: 717	O T Head Problem ????? MY 350 SMALL BLOCK BIT THE DUST IT DID THE SAME THING ZUMOS DID IT DROPPED A VALVE AND I NEED A SET OF HEADS NOW . ANYBODY KNOW WHERE I CAN GET A SET OF HEADS W/ O PAYING AN ARM AND A LEG THE ONES ON MY TRUCK WERE 68 - 76 LOW COMPRESSION HEADS NO. 3998993. ANY HELP AT ALL IS GREATLY APPRECIATED. I HAVE GOT GET MY TRUCK BACK ON THE ROAD BEFORE I LOSE MY MIND. HELP!!!!! THANKS, IN ADVANCE . DAN __________________ 1969 cst swb 350/400 th . DANNY C . ["]FRIENDS DONT LET FRIENDS DRIVE F@RD$!! 1969 cst swb corvette hugger orange with 400 hp sbc I started out with nothing and i held on to it

08-05-2003, 01:49 AM	#2
shadetree Senior Member Join Date: Dec 1999 Location: Knightstown, in, usa Posts: 2,525	Small blocks are like belly buttons, everybody has one. Seriously, any wrecking yard should have several sets lying around. Any machine shop should have some, rebuilt, no less, and reasonable. Ebay has many listed, ect ect. good luck __________________ 1970 long fleet, 355 4 speed, primer, walnut goodies

08-05-2003, 01:53 AM	#3
Hooter My other Love Join Date: Aug 2001 Location: Castlegar B.C. Canada Posts: 4,085	whats with everyone dropping valves? I just did that on Saturday on the old 300-6 Ford! __________________ Castlegar B.C.The great white North (Canada Eh!) Hooter_5@hotmail.com First generation Monte Carlo club pictures of my life

08-05-2003, 05:18 AM	#4
ramblinredneck Registered User Join Date: Jul 2003 Location: arkansas Posts: 28	I'll be in st.louis this friday and saturday and i've got a couple of sets of small block heads they are 624 and 441 casting numbers. the 624 set have been run, but they look clean. the 441 set have been reworked with manley stainless valves and mild porting. both sets have 1.94/1.5 valves. $75 for the used set or $250.00 for the reworked set. Let me know and I will bring them with me for you to look at.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.