The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-18-2011, 10:08 PM   #1
stealthy '69
'69 Chevy SWB
 
stealthy '69's Avatar
 
Join Date: Feb 2009
Location: Surprise, Az
Posts: 1,065
Tubular trans cross members?

Has any one here ever made their own transmission cross member? I have access to everything to build one at work but nothing to go off of for a template. A few question I have are, what length to make it (side to side) and whether or not there is any kind of bend in it or just a straight shot side to side between the frame rails.
__________________
Matt



'69 Chevy SWB Fleet, Primer Black; Project No Name
'06 Chevy Trailblazer, Blueish Silver?; Wifes DD, Sold
'08 Chevy Impala SS, Silver; the new DD, AND IT IS FUN!!!
'99 Dodge Dakota R/T, Intense Blue; DD, Sold


Quote:
Originally Posted by longbed67 View Post
The tig welds are not the prettiest i have seen but they do have good penetration.
Quote:
Originally Posted by oldblue1968chevy View Post
There are two things in life where penetration is really important.....and one of them is welding.
stealthy '69 is offline   Reply With Quote
Old 08-18-2011, 10:48 PM   #2
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,064
Re: Tubular trans cross members?

Quote:
Originally Posted by stealthy '69 View Post
Has any one here ever made their own transmission cross member? I have access to everything to build one at work but nothing to go off of for a template. A few question I have are, what length to make it (side to side) and whether or not there is any kind of bend in it or just a straight shot side to side between the frame rails.
You can make it anyway you want it. Bent, straight, or both.... It will just depend on what is easiest for you to work with (functional & clears everything). For most guys, it's easiest to do the garage type build w/a straight piece of round or rectangular steel.

For length it depends on if you plan to mount it on the horizontal or vertical plane of the frame rail.

I try & build them like the factory, just stronger/HD. Mine fasten @ both the top & bottom lip of the frame rail & then I add a triangulating gusset so it's more structural vs. just bolting it to one or the other. Google an ECE x-member or TCI (streetrods, not the trans co) for ideas.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote
Old 08-18-2011, 11:00 PM   #3
stealthy '69
'69 Chevy SWB
 
stealthy '69's Avatar
 
Join Date: Feb 2009
Location: Surprise, Az
Posts: 1,065
Re: Tubular trans cross members?

Thanks SCOTI, I've been looking into it a little. I think I'm gonna go with a straight rail and mount it like factory.

Any one happen to have the dimensions for the mount pad. I've been googling it and haven't seen it yet. But I'm gonna keep looking.
__________________
Matt



'69 Chevy SWB Fleet, Primer Black; Project No Name
'06 Chevy Trailblazer, Blueish Silver?; Wifes DD, Sold
'08 Chevy Impala SS, Silver; the new DD, AND IT IS FUN!!!
'99 Dodge Dakota R/T, Intense Blue; DD, Sold


Quote:
Originally Posted by longbed67 View Post
The tig welds are not the prettiest i have seen but they do have good penetration.
Quote:
Originally Posted by oldblue1968chevy View Post
There are two things in life where penetration is really important.....and one of them is welding.
stealthy '69 is offline   Reply With Quote
Old 08-18-2011, 11:00 PM   #4
fastwillie 696969
~Rest In Peace~
 
fastwillie 696969's Avatar
 
Join Date: May 2005
Location: CALIFORNIA NOR CAL
Posts: 9,707
Re: Tubular trans cross members?

did anyone see the adjustable trans crossmember on spiketv hotrod
__________________
is it fast ? it has a lighting bolt donut?


B___H please, I can remove 90% of your so called "beauty" with a kleenex
fastwillie 696969 is offline   Reply With Quote
Old 08-18-2011, 11:05 PM   #5
stealthy '69
'69 Chevy SWB
 
stealthy '69's Avatar
 
Join Date: Feb 2009
Location: Surprise, Az
Posts: 1,065
Re: Tubular trans cross members?

Quote:
Originally Posted by fastwillie 696969 View Post
did anyone see the adjustable trans crossmember on spiketv hotrod
I don't have cable, so no.
__________________
Matt



'69 Chevy SWB Fleet, Primer Black; Project No Name
'06 Chevy Trailblazer, Blueish Silver?; Wifes DD, Sold
'08 Chevy Impala SS, Silver; the new DD, AND IT IS FUN!!!
'99 Dodge Dakota R/T, Intense Blue; DD, Sold


Quote:
Originally Posted by longbed67 View Post
The tig welds are not the prettiest i have seen but they do have good penetration.
Quote:
Originally Posted by oldblue1968chevy View Post
There are two things in life where penetration is really important.....and one of them is welding.
stealthy '69 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:38 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com