passenger door won't open.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Blue4x4 · 08-11-2003, 11:00 PM

seems all was going too well after almost finishing my 69 4X4. I have a problem with the pass. door. looking thru the access opening on the inside of the door.......it's unlocked and the opening meckinisem is unlatching.....but it still won't open. I think the door closed too far ( no bumpers or gaskets installed yet) Any ideas will be most appricated.

JimKshortstep4x4 · 08-12-2003, 07:23 AM

I assume that the mechanism is not rusty, so the suggestion that I would have is to get some help to push on the door. If the mechanism is releasing than the door must be stuck so with one person inside pushing with their feet and one person outside pulling, (and pressing the door release button in), the door should come open.

I have never seen the need to cut a door to get it to open.

Jim

dmurphy68 · 08-12-2003, 07:42 AM

Mine did the same thing and all it needed was a swift kick for the inside

Later
Darren

*Randy70C-10* · 08-12-2003, 10:42 AM

If you tug on it really hard it will open. Mine does the same thing. A swift kick will work too.

08-11-2003, 11:00 PM	#1
Blue4x4 Senior Member Join Date: Mar 2003 Location: Sparks, NV Posts: 790	passenger door won't open.... seems all was going too well after almost finishing my 69 4X4. I have a problem with the pass. door. looking thru the access opening on the inside of the door.......it's unlocked and the opening meckinisem is unlatching.....but it still won't open. I think the door closed too far ( no bumpers or gaskets installed yet) Any ideas will be most appricated.

08-12-2003, 07:42 AM	#3
dmurphy68 Registered User Join Date: Nov 2002 Location: Middletown ohio Posts: 1,058	Mine did the same thing and all it needed was a swift kick for the inside Later Darren __________________ The very atmosphere of firearms everywhere restrains evil interference. When firearms go, all goes, we need them every hour. - George Washington No free man shall be debarred the use of arms - Thomas Jefferson Later Darren http://www.myspace.com/dmurphy68

08-12-2003, 07:23 AM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	I assume that the mechanism is not rusty, so the suggestion that I would have is to get some help to push on the door. If the mechanism is releasing than the door must be stuck so with one person inside pushing with their feet and one person outside pulling, (and pressing the door release button in), the door should come open. I have never seen the need to cut a door to get it to open. Jim

08-12-2003, 10:42 AM	#4
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	If you tug on it really hard it will open. Mine does the same thing. A swift kick will work too.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.