What did you get done th is week 9/19/11 edition - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ymerej71 · 09-19-2011, 01:30 PM

Quote:

Originally Posted by hotrod_991

you get those rallies from summit? the 295's tucked in without touching the frame rails? I ask because I am thinking about going this route with mine.

Yes... they are 15x10 rallys with 5" backspacing with BFG 295/50's. They do fit without rubbing any on the frame / wheel tubs or the fender lip. I did all the fitment measuring before I bought everything, and also got lots of helpful info / pics from a few fellow boardmembers that had the same setup. I'll be dropping the truck more in the future, so I had to make sure these would tuck nicely. I did buy the wheels from Summit... They are Wheel Vintiques rallys, but I got them cheaper buying them through Summit (cheaper shipping).

Here's a couple more pics of the rear of the truck...

Blake_H · 09-19-2011, 01:35 PM

Got started on my engine swap in my crew cab. It's been sitting for 3 years and I started a build thread

[IMG]

[/IMG]

Bow Tie Scottie · 09-19-2011, 01:45 PM

Replaced the worn out alternator, v-belt, air cleaner and pvc valve. Used a Ultima 94 amp remanufactered alt. from O'Reilly's, a Gates belt and other items made by Purolator. I did the easy part; my friend did the hard part!

Voltage reading wint from 12.6 (even lower at times) to 14.5 with a load.

gearheads78 · 09-19-2011, 03:19 PM

nice n meaty

Quote:

Originally Posted by ymerej71

Got my new set of 10" rallys painted and new 295/50 BFG's mounted and bolted up on the rear of my '79 GMC. I gave the front rallys a fresh coat of paint early this morning, hoping to get them back on the truck by tomorrow.

hotrod_991 · 09-19-2011, 04:13 PM

yea loveing the look of the 295's can you go any wider safely?

foamypirate · 09-19-2011, 04:16 PM

Got my bucket seats and some other misc. crap into shed out back so I could make room to get the bed off my truck.

Still waiting for circumstances to work out to get it off the truck. Seems like all of my friends/wife/brother all broke at the same time. Brother is having nerve issues in his arm, wife had ankle surgery, other friend moved to VA, etc.

jitteryguy · 09-19-2011, 04:26 PM

some of the fella's hit a pot hole, so I brought there truck back in yard (bad neighbor hood, cant leave nothen outside) .
all the guy's walk'd away but truck need's some minor repair's !

frenchsquared · 09-19-2011, 06:44 PM

bagged the front on Friday.
installed new subs, and some dynamate on Saturday
installed my first alarm and a lot of under carpet padding on Sunday.

Got a lot done for one weekend.

85burb · 09-19-2011, 08:39 PM

Quote:

Originally Posted by jitteryguy

some of the fella's hit a pot hole, so I brought there truck back in yard (bad neighbor hood, cant leave nothen outside) .
all the guy's walk'd away but truck need's some minor repair's !

I do not want to find that pot hole. Someone should report it to dot.......

SCOTI · 09-19-2011, 10:45 PM

Quote:

Originally Posted by gearheads78

Went 80 miles away to a swap meet and didn't find much of anything. I did get a great deal on a hose real for the shop.

Last night i'm glancing through craigslist and see a guy selling like new tires 235 /255/ 70 tires and 7 / 8 rallys like I want for the Burban until I can afford what I really want. Turns out they were 15min from where the swapmeet was so I drove 70 miles to go get them.

Those will work well w/the right drop. Nice score.

gearheads78 · 09-19-2011, 10:51 PM

Quote:

Originally Posted by SCOTI

Those will work well w/the right drop. Nice score.

I am very happy. I could not have even paid for the tires for what I got these for.

ymerej71 · 09-19-2011, 11:07 PM

Quote:

Originally Posted by hotrod_991

yea loveing the look of the 295's can you go any wider safely?

I really don't think you could go much wider with a stock width axle and still keep the tires inside the fenders. The 15x10 wheel-295/50 tire combo fills the fender wells just right. Here's a rear view of the truck after I got these mounted.

kstephens1223 · 09-20-2011, 01:53 AM

got some rust free rear doors for my crew cab, made a deal with a guy down the road, he let me have the doors off of a 90 suburban in exchange for me taking the front clip off, works for me.

sumran · 09-20-2011, 08:25 AM

Quote:

Originally Posted by jitteryguy

some of the fella's hit a pot hole, so I brought there truck back in yard (bad neighbor hood, cant leave nothen outside) .
all the guy's walk'd away but truck need's some minor repair's !

Was it the exploding kind?

jitteryguy · 09-20-2011, 10:07 AM

ya, it was. the goverment pays way to much for these truck's till they hit one of these, then there worth every penny ! we've lost 3 trucks this year with out any serious personal injuries.

Kerlijah · 09-21-2011, 01:36 AM

Picked up a custom dual cowl induction hood off craigslist for 80 bucks!! From a guy literally 3 miles down the road from me no less. Got it all sanded down and sprayed some rattle can primer, good 'nuff till I can get the whole heap painted. Been looking for a hood like this forever, couldnt pass it up at that price!!

I also tried installing my new seats (out of an '04 Sierra) but because of how my cap floor flares up over the gas tanks, the seats sat about 4 or 5 inches too high...I have no idea what I'm gonna do to solve that!!

MalibuSSwagon · 09-21-2011, 02:00 AM

Spent $200 to re-register a Honda, the C10, and an ugly car trailer.

Diff cover sprung a leak, replacing that tomorrow I hope.

sumran · 09-21-2011, 07:49 AM

Quote:

Originally Posted by jitteryguy

ya, it was. the goverment pays way to much for these truck's till they hit one of these, then there worth every penny ! we've lost 3 trucks this year with out any serious personal injuries.

Glad it is a problem for the mechanic instead of the surgeon or the chaplin!

09-19-2011, 01:35 PM	#27
Blake_H Registered User Join Date: Oct 2009 Location: Redmond, OR Posts: 217	Re: What did you get done th is week 9/19/11 edition Got started on my engine swap in my crew cab. It's been sitting for 3 years and I started a build thread [IMG][/IMG]

09-19-2011, 01:45 PM	#28
Bow Tie Scottie Registered User Join Date: Nov 2008 Location: Duluth, GA Posts: 80	Re: What did you get done th is week 9/19/11 edition Replaced the worn out alternator, v-belt, air cleaner and pvc valve. Used a Ultima 94 amp remanufactered alt. from O'Reilly's, a Gates belt and other items made by Purolator. I did the easy part; my friend did the hard part! Voltage reading wint from 12.6 (even lower at times) to 14.5 with a load. __________________ Sit back. Relax. Enjoy the ride! 86 Chevy Scottsdale C20, SBC 350, TH400, 4.10 gear ratio

09-19-2011, 04:13 PM	#30
hotrod_991 Registered User Join Date: Jul 2009 Location: Thibodaux, LA Posts: 479	Re: What did you get done th is week 9/19/11 edition yea loveing the look of the 295's can you go any wider safely? __________________ "Buckle up I wanna try somethin!!" "of course it will hold!, I welded it!" 1977 c10 under knife for full rebuild, 5.3l 4l60e drive rain swap, replacement frame and green repaint

09-19-2011, 04:16 PM	#31
foamypirate Registered User Join Date: Apr 2009 Location: Pflugerville, TX Posts: 594	Re: What did you get done th is week 9/19/11 edition Got my bucket seats and some other misc. crap into shed out back so I could make room to get the bed off my truck. Still waiting for circumstances to work out to get it off the truck. Seems like all of my friends/wife/brother all broke at the same time. Brother is having nerve issues in his arm, wife had ankle surgery, other friend moved to VA, etc.

09-19-2011, 04:26 PM	#32
jitteryguy GoatLube Experss Join Date: Oct 2009 Location: clarksville, Tn. Posts: 1,337	Re: What did you get done th is week 9/19/11 edition some of the fella's hit a pot hole, so I brought there truck back in yard (bad neighbor hood, cant leave nothen outside) . all the guy's walk'd away but truck need's some minor repair's ! Attached Images __________________ *Goat Lube Express*, locations in Qalat,Afghanistan & Clarksville, Tn. '87 R30 dually 454/TH400 '85 1/2 ton CCSB '92 S10 350/350 '84 MonteCarlo 383/PG/9"ford '78 Malibu wagon 350/350 '78 Cutlass (project family car) '96 S10 Jimmy (Moma's)

09-19-2011, 06:44 PM	#33
frenchsquared Registered User Join Date: Sep 2011 Location: Denver Co Posts: 36	Re: What did you get done th is week 9/19/11 edition bagged the front on Friday. installed new subs, and some dynamate on Saturday installed my first alarm and a lot of under carpet padding on Sunday. Got a lot done for one weekend. __________________ 79 C10 Stepside, on 22's, 350, AFR 2.02 Heads, Victor Jr, Holley 770 Ultra, 12 bolt 3:73, 700r4...

09-20-2011, 01:53 AM	#38
kstephens1223 Registered User Join Date: Jan 2011 Location: Walnut Grove, GA Posts: 80	Re: What did you get done th is week 9/19/11 edition got some rust free rear doors for my crew cab, made a deal with a guy down the road, he let me have the doors off of a 90 suburban in exchange for me taking the front clip off, works for me. __________________ Ken Stephens It's easier to apologize than ask permission...

09-20-2011, 10:07 AM	#40
jitteryguy GoatLube Experss Join Date: Oct 2009 Location: clarksville, Tn. Posts: 1,337	Re: What did you get done th is week 9/19/11 edition ya, it was. the goverment pays way to much for these truck's till they hit one of these, then there worth every penny ! we've lost 3 trucks this year with out any serious personal injuries. __________________ *Goat Lube Express*, locations in Qalat,Afghanistan & Clarksville, Tn. '87 R30 dually 454/TH400 '85 1/2 ton CCSB '92 S10 350/350 '84 MonteCarlo 383/PG/9"ford '78 Malibu wagon 350/350 '78 Cutlass (project family car) '96 S10 Jimmy (Moma's)

09-21-2011, 01:36 AM	#41
Kerlijah Registered User Join Date: Feb 2011 Location: Boise, ID Posts: 293	Re: What did you get done th is week 9/19/11 edition Picked up a custom dual cowl induction hood off craigslist for 80 bucks!! From a guy literally 3 miles down the road from me no less. Got it all sanded down and sprayed some rattle can primer, good 'nuff till I can get the whole heap painted. Been looking for a hood like this forever, couldnt pass it up at that price!! I also tried installing my new seats (out of an '04 Sierra) but because of how my cap floor flares up over the gas tanks, the seats sat about 4 or 5 inches too high...I have no idea what I'm gonna do to solve that!! Attached Images __________________ ~Wooden Indian~ 1979 C10 SWB, shaved bed rails, drip rails, tailgate handle. 350 w/ Comp cam, hydraulic lifters, Edelbrock Performer intake, Edelbrock 650 carb, Flowtech headers, Flowmaster 40s, turbo 350 w/stage 2 shift kit...so much fun!

09-21-2011, 02:00 AM	#42
MalibuSSwagon Registered User Join Date: Sep 2009 Location: Weare,NH Posts: 1,592	Re: What did you get done th is week 9/19/11 edition Spent $200 to re-register a Honda, the C10, and an ugly car trailer. Diff cover sprung a leak, replacing that tomorrow I hope. __________________ Eric 1992 Oldsmobile Custom Cruiser 1986 Chevrolet C10\|5.3L\|TKO600\|Shortbed\|Custom Deluxe 1983 Malibu Wagon\|TPI 305\|T5 5 speed\|3.73 non-posi



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.